Tag Archives: Yamaha Reviews

2019 Yamaha Niken GT | First Ride Review

2019 Yamaha Niken GT action lean
It took a while to overcome my instincts and APF (acute pucker factor) before I could pitch the 2019 Yamaha Niken GT into wet corners at dry-road speeds, but once there it does indeed stay stuck. (Photography by Joe Agustin)

Following our first ride on the 2018 Niken at the press introduction in Europe, Yamaha pre-sold every one of the relatively few examples it brought to the States, and test units of the world’s first production Leaning Multi-Wheeled motorcycle were tough to come by. Although I was able to write a fairly comprehensive review of the two-front-wheeled bike based on the 140-mile intro ride, questions still remained. Namely, how does the Niken work on the wet, dirty, snotty, bumpy roads it was designed to tame, rather than just licked-clean, dry and perfectly surfaced twisties in the Austrian alpine sunshine? Fortunately we were able to get back on the LMW’s saddle recently at the launch of the 2019 Niken GT on some wonderfully varied roads in Central California. And not only did it rain all freakin’ day, I was able to abscond with a test bike to put on our scale and into the curious hands of the entire Rider staff.

2019 Yamaha Niken GT action lean
Wide handlebar provides ample leverage, and with the smooth action of the leaning mechanism and suspension makes the Niken steering effortless.

My riding impressions, the tech details and features of the Niken in my First Ride Review still hold true, but know this: Regardless of your feelings about its angry-robot looks, the 580-600-pound wet weight (depending on model) of the 3-cylinder, 847cc bike or insecurities about being seen on such a weird and groundbreaking motorcycle, I have never ridden faster around a corner in the rain on a machine that leans in my entire life. In the pouring rain on the tightest, slickest, bumpiest part of snaky Tepusquet Canyon Road, I repeatedly tried to break the Niken GT’s front end loose, and failed. There is so much grip front and rear that–while it takes some time to put your trust in the disconnected feeling common to alternative front ends–once you do the Niken will simply keep leaning farther and farther without a hint of looseness or instability, right up to the 43 degrees of lean when its footpeg feelers touch tarmac. With two tires up front, should one tire slip in some dirt or leaves the other takes over, during braking as well as cornering, and road irregularities like tar snakes and rain grooves simply disappear. The sense of effortless stability from the steering and suspension is unequaled by any normal motorcycle as well.

2019 Yamaha Niken GT chassis no bodywork
A hybrid frame with a cast steel headstock, tubular-steel main frame and cast aluminum swingarm pivot support and swingarm result in a much stronger arrangement than the all-aluminum frame of the Tracer 900 from which the Niken gets its engine.

Sure, a good sportbike can exceed 43 degrees of lean without trying hard, even the 45 degrees of which the Niken is capable before its parallel quadrilateral support arms bottom out. The Niken and Niken GT aren’t intended to push cornering extremes, but to add a level of confidence to everyday riding and safety to riding in poor road conditions. Since it’s a full-size motorcycle, not a scooter, doesn’t have a tilt lock and must be held up at stops and parked on its sidestand (or GT’s centerstand), the Nikens are intended for experienced riders, perhaps those looking for a little less worry or stress when riding in the rain or at a brisk pace. Most of all they’re a lot of fun to ride thanks to that riding-on-rails stability combined with sportbike-like agility–every time I ride one I’m reminded of the Speeder bikes in “Star Wars” zipping through the trees in the Endor forest. And yes, you can easily share or split lanes–the handlebar is the widest part of the bike, and it’s no wider than a typical adventure bike bar. I’d still like more bite from the front brakes–although there’s an opposed 4-piston caliper on each wheel, the discs are smallish at 266mm–and while the heated grips worked well on the low and medium settings, on our test bike they didn’t heat evenly on high.

2019 Yamaha Niken GT action
Fifteen-inch front wheels provide agility with stability, and the stock Bridgestone Adventure A41 tires grip remarkably well.

Mark’s Gear
Helmet: Shoei Neotec II
Jacket: Tour Master Transition Series 5
Pants: Rev’It
Boots: Dainese Long Range

Read our 2019 Yamaha Tracer 900 GT Road Test Review

The Niken is part of Yamaha’s sport-touring lineup, and well it should be, given its relaxed upright seating. Unlike the Tracer 900 it’s based upon, footpegs are underneath the rider rather than behind, and are low enough to allow plenty of legroom. There’s a natural reach to the high, wide handlebar, which doesn’t put any weight on your wrists, and comfortable weight distribution between your butt and feet. The Niken GT takes the touring equation several steps further by adding a wider, taller windscreen, heated grips, comfort rider and passenger seats, a passenger grab rail that is top-case ready, an additional 12-watt power outlet, a pair of quick-release 25-liter saddlebags and a centerstand. Although not quite big enough to hold a full-face helmet, the semi-soft, zippered clamshell saddlebags have a slick, lightweight design to help keep the GT’s load capacity above 400 pounds. Separate waterproof liners and small combination locks for the zippers keep you gear dry and secure, and both the bags and mounting racks lock to the bike but release easily so you can take just the bags with you or remove the entire setup, leaving just a small mounting stub on either side.

2019 Yamaha Niken GT chassis no bodywork steering
With bodywork removed and lifted with a floor jack, you can see the full range of motion of the parallel quadrilateral arms that allow the Niken to lean.

All told the GT package only adds 20 pounds, and all of its components work exceptionally well. The comfort seats are plush and cozy for long rides (though they do raise the rider’s seat height about an inch, which puts me on my tiptoes at stops), the windscreen provides good upper body coverage and the centerstand eases final drive-chain service (and lets you lift the front to show off the movement of the parallel fork support arms). For more wind protection a 2.4-inch-taller windscreen is available for the Niken GT, and Yamaha offers heated comfort seats as well.

2019 Yamaha Niken GT action lean
With just 16.1 inches between tire centers, the Niken’s handlebar is the widest part of the bike, so sharing lanes is a snap.

As Yamaha’s and the world’s first production LMW motorcycle, given the small number of Nikens and Niken GTs the company is offering globally (and their premium pricing), I have to believe that it’s testing the waters in the real world not just to see how well its known performance parameters are accepted, but also its unknown ones–what sort of effect might the Niken have on a rider’s attitude about going back to a regular bike with “just” one wheel in front, for example? Given its testing of more extreme LMW variations and even self-balancing autonomous motorcycles, you have to believe that the Niken is just the first salvo in a separate line of LMWs if it shows promise. Imagine its front end on an FJR1300, for example, with tilt lock as an option. Sport touring would never be the same.

2019 Yamaha Niken GT
Niken GT adds a taller, wider windscreen, heated grips, comfort seats, 25-liter saddlebags, passenger grab rail that’s top-case ready and a centerstand.

Check out Rider’s Guide to New/Updated Street Motorcycles for 2019

(Scroll down for more photos)

2019 Yamaha Niken GT Specs
Base Price:
$17,299
Warranty: 1 yr., unltd. miles
Website: yamahamotorsports.com

ENGINE
Type: Liquid-cooled, transverse in-line triple
Displacement: 847cc
Bore x Stroke: 78.0 x 59.1mm
Compression Ratio: 11.5:1
Valve Train: DOHC, 4 valves per cyl.
Valve Insp. Interval: 26,000 miles
Fuel Delivery: EFI w/ YCC-T & 41mm throttle bodies
Lubrication System: Wet sump, 3.6-qt. cap.
Transmission: 6-speed, cable-actuated assist-and-slipper wet clutch
Final Drive: O-ring chain

ELECTRICAL
Ignition: TCI
Charging Output: 430 watts @ 5,000 rpm
Battery: 12V 9.1AH

CHASSIS
Frame: Hybrid cast/tubular steel & cast aluminum diamond w/ cast aluminum swingarm
Wheelbase: 59.4 in.
Rake/Trail: 20.0 degrees / 2.9 in.
Seat Height: 32.9 in.
Suspension, Front: Double USD telescopic, 41mm front, 43mm rear fully adj., 4.3-in. travel
Rear: Single linked shock, fully adj. w/ preload remote, 4.9-in. travel
Brakes, Front: Dual 266mm discs w/ opposed 4-piston calipers & ABS
Rear: Single 298mm disc w/ 2-piston floating caliper & ABS
Wheels, Front: Cast, 3.50 x 15 in. (x 2)
Rear: Cast, 6.00 x 17 in.
Tires, Front: 120/70-ZR15
Rear: 190/55-ZR17
Wet Weight: 600 lbs.
Load Capacity: 410 lbs.
GVWR: 1,010 lbs.

Performance
Fuel Capacity: 4.8 gals., last 1.06 gal. warning light on
MPG: 91 AKI min. (low/avg/high) 36.0/41.4/45.8
Estimated Range: 199 miles
Indicated RPM at 60 MPH: 4,000

2019 Yamaha Niken GT engine
Liquid-cooled, transverse 847cc in-line triple gets a number of minor changes for use in the Niken.
2019 Yamaha Niken GT dash meter gauge
LCD meter is clear, easy-to-read and provides heated grip, ride mode and traction control settings and trip computer data at a glance.
2019 Yamaha Niken GT cockpit
Taller, wider windscreen on the GT provides ample upper body protection; a 2.4-inch taller one is available, too.
2019 Yamaha Niken GT
Plusher GT seats add comfort for long rides (and rider’s is about one-inch taller).
2019 Yamaha Niken GT saddlebag
Lightweight, quick-release semi-soft saddlebags hold about 25 liters, or 11 pounds, and come with waterproof liner bags.
2019 Yamaha Niken GT preload adjuster
Additional 12-watt (1 amp) power outlet on the Niken GT, and remote rear preload adjuster.
2019 Yamaha Niken GT
If those two wheels don’t their attention, the twin LED headlights will.
2019 Yamaha Niken GT action
A break in the rain at beautiful Avila Bay, California, after lunch at the Olde Port Inn on the pier. With the addition of the GT equipment, the Niken is ready for some long and memorable rides.

Source: RiderMagazine.com

Retrospective: 1969-1971 Yamaha DS6-C 250cc Street Scrambler

1969 Yamaha DS6-C Street Scrambler. Owner: Ed Heckman, Paso Robles, California.
1969 Yamaha DS6-C Street Scrambler. Owner: Ed Heckman, Paso Robles, California.

For more than 10 years 250 two-stroke twins were the mainstay of the Yamaha range here in the United States, from the DS1 of 1959 (though not sold in the U.S. until 1961) to the DS7 of 1972. We have no idea what the DS stands for, but doubt that it has anything to do with the DS prefix used in Yamaha’s music department. Two-strokes were the popular engines for sporty bikes in the 1960s, being reasonably powerful and inexpensive to make. Running against this 250 DS6 were Suzuki’s Hustler and Kawasaki’s Samurai, all in the $600 range. Any college student having a few bucks in his pocket could probably arrange time payments with the local dealer…backed by Dad’s signature.

When Yamaha advertised this quarter-liter as having 30 horsepower, interest was great. And it passed the eye test as well, with high pipes, one on each side. This was styled as a dual-purpose machine–hence the C in the alpha numerology. The chassis design was much more favorable to the street rather than the trail, so the high pipes were more a styling point rather than functional.

1969 Yamaha DS6-C Street Scrambler. Owner: Ed Heckman, Paso Robles, California.The history of the DS6 engine was long and had the distinct advantage of being associated with Yamaha’s racing 250, the TD1, which had great success over the previous decade. Riders could thank Yamaha’s racing shop for improvements, as the company was intent on keeping its 250 riders on the podium. And what is good on the track can be tuned down to find its place on the street. Any time the engineers improved the racer, they would try to figure out a way to adapt whatever it was to the street bike. Ads for the DS6 promoted the TD’s Daytona wins in 1967 and 1968.

The DS6 246cc engine was of piston-port design, with the 56mm bore and 50mm stroke that had been around for 10 years. This was a genuine five-porter, the ports being cast into the aluminum cylinders with cast iron liners. The new for ’69 cylinders had three transfer ports, along with intake and exhaust, allowing for a larger fuel charge to find its way into the combustion chambers faster. Compression ratio was a reliable 7.3:1, and the cylinders now had copper head gaskets to replace the earlier aluminum ones–which had a tendency to fail when pushed very hard. Naturally these new gaskets came from the racing TDs. Inside the engine were race-worthy bearings, though they would never be subjected to the 10,000-plus rpm attained by TDs. Those 30 advertised horses were said to be generated at 7,500 rpm, and were certainly taken off the crankshaft rather than the rear wheel. Road tests merely quoted the “claimed bhp.”

1969 Yamaha DS6-C Street Scrambler. Owner: Ed Heckman, Paso Robles, California.Two 26mm Mikuni VMC two-stroke carbs combined with Yamaha’s Autolube system fed the fuel/oil mixture into the crankcase. Yamaha was noted for having developed the Autolube system, using a separate container for oil rather than messily mixing it with gas in the tank. It was being used on Yamaha’s race bikes in the late ’50s, and then adapted to street machines in the early ’60s. The greatest advantage to Autolube was that it could closely regulate the amount of oil to be mixed with the gas, so instead of having a steady 20:l mixture, which could get quite smoky at times, the oil was metered by both engine speed and the opening of the throttle valves. This could diminish oil input when idling through town, and give it an almighty whack when the rider decided that a full-on accelerator rush down a country road was in order. The oil capacity was three pints, which was good for half a dozen fill-ups of the 3-gallon gas tank.

1969 Yamaha DS6-C Street Scrambler. Owner: Ed Heckman, Paso Robles, California.Crankshaft power ran back the left side via helical gears to a seven plate clutch, blessed with six torsion springs that helped to absorb even the most abrupt of gear changes. And rubber cushions in the hub helped reduce vibration. Smoothness was what the rider felt when going through the five gears. All this sat securely in a tubular steel double-cradle frame, which looked remarkably like that on a race bike.

A rather steep 34mm telescopic fork ran down to the 18-inch front wheel, where a 7-inch double-leading-shoe front brake did an excellent job of slowing things down. The rear swingarm had a pair of shocks with adjustments available for spring preload. And the wheel, another 18-incher, also had a 7-inch brake, but with a single leading shoe. The 50.8-inch wheelbase was a quick handler on the street, but would keep the sensible trail rider at a more modest pace.

1969 Yamaha DS6-C Street Scrambler. Owner: Ed Heckman, Paso Robles, California.The look was quite different from the preceding low-pipe DS5, which had a rather bulbous 4-gallon tank, and speedometer and tach built into one unit. The smaller 3-gallon teardrop tank was much more attractive in appearance, and the speedo and tach were now separate…very English. Long, flat saddle and chromed metal fenders added to the good looks, going along with the upswept pipes–which did have protective heat-shielding, but long pants were advisable. Yamaha had dropped a tooth from the DS5 countershaft sprocket, which reduced the top speed a small amount, down to 90 or so mph–depending on the weight sitting on the saddle. And a skid plate was bolted on, more for looks than the thought that this shiny fellow would ever scrape its underbelly.

The DS6-C weight was down 20 pounds on DS5, weighing 304 pounds dry. Much of that had to do with the absence of an electric starter. Firing up this baby was done the old-fashioned way…admittedly a very simple task.

The DS series was a great sales success, lasting until the RD250s took over in 1973.

1969 Yamaha DS6-C Street Scrambler. Owner: Ed Heckman, Paso Robles, California.

1969 Yamaha DS6-C Street Scrambler. Owner: Ed Heckman, Paso Robles, California.

Source: RiderMagazine.com

The Best Bikes for Smaller Riders (and Budgets): 2019 Edition!

Bigger doesn’t always mean better, and fortunately for those of us looking for a fun, affordable motorcycle there are more choices than ever. Nearly every manufacturer now offers at least one model that will fit just about any rider’s size and/or budget.

Scroll down for Rider’s 2019 list of Best Bikes for Smaller Riders and Budgets. When possible we’ve included a link to our review, making it easy for you to get a real ride evaluation. We’ve also included the 2019 model year’s U.S. base MSRP (as of publication), seat height and claimed wet weight (when a wet weight was not available from the manufacturer, the claimed dry weight is listed). For more details, you can read our review, which includes comprehensive specs, or click on the bike’s name to be taken directly to the manufacturer’s page.

BMW F 750 GS

2019 BMW F 750 GS
2019 BMW F 750 GS (Photo by Kevin Wing)

BMW F 750 GS
$10,395
32.1-inch seat w/ optional 31.1-inch seat or 30.3-inch seat
493 lbs.

Read our Road Test Review of the 2019 BMW F 750/850 GS

BMW G 310 GS 

2018 BMW G 310 GS. Photo by Kevin Wing.
2018 BMW G 310 GS (Photo by Kevin Wing)

BMW G 310 GS
$5,795
32.9-inch seat w/ optional 32.3-inch seat
374 lbs.

Read our First Ride Review of the 2018 BMW G 310 GS

How did the G 310 GS stack up against the Kawasaki Versys-X 300 and Royal Enfield Himalayan? Find out in our comparison test.

BMW G 310 R

The G 310 R is anything but boring. You can't see it, but I'm grinning inside my helmet.
2018 BMW G 310 R (Photo by Kevin Wing)

BMW G 310 R
$4,750
30.9-inch seat w/ optional 30.3-inch seat
349 lbs.

Read our First Ride Review of the 2018 BMW G 310 R

Can-Am Ryker

Can-Am Ryker
2019 Can-Am Ryker Rally (Photo by Kevin Wing)

Can-Am Ryker
starting at $8,499 (600cc model)
23.5-inch seat
594 lbs. (dry, 600cc)

Read our First Ride Review of the 2019 Can-Am Ryker

CSC RX3

The 2016 CSC RX3 is a surprisingly capable small-displacement adventurer tourer, at a price point that is undeniably attractive. (Photos: the author and James Norris)
CSC RX3 (Photo by James Norris)

CSC RX3
$5,395
31.9-inch seat
450 lbs. (dry)

Read our Road Test Review of the 2016 CSC RX3

Ducati Monster 797+

2018 Ducati Monster 797+
2018 Ducati Monster 797+

Ducati Monster 797+
$9,295
31.7-inch seat
386 lbs. (dry)

Ducati Scrambler Sixty2

2019 Ducati Scrambler Sixty2.
2019 Ducati Scrambler Sixty2

Ducati Scrambler Sixty2
$7,995
31.1-inch seat w/ optional 30.3-inch seat
403 lbs.

Read about Ducati’s updates to the 2019 Scrambler lineup

Ducati Scrambler Full Throttle

2019 Ducati Scrambler Full Throttle
2019 Ducati Scrambler Full Throttle

Ducati Scrambler Full Throttle
$10,995
31.4-inch seat w/ optional 30.6-inch seat
417 lbs.

Read about Ducati’s updates to the 2019 Scrambler lineup

Harley-Davidson Street Rod

The 2017 Harley-Davidson Street Rod is based on the Street 750, with sharpened handling and styling. It has a steeper rake, longer suspension travel and a higher seat height that enables deeper lean angles. (Photos by Brian J. Nelson)
2017 Harley-Davidson Street Rod (Photo by Brian J. Nelson)

Harley-Davidson Street 500/750/Street Rod
starting at $6,899
25.7-inch seat
492 lbs. (dry)

Read our first ride review of the 2017 Harley-Davidson Street Rod

Harley-Davidson SuperLow

Harley-Davidson Superlow
Harley-Davidson SuperLow

Harley-Davidson SuperLow
$8,699
25.5-inch seat
545 lbs. (dry)

Harley-Davidson Iron 883

Harley-Davidson Iron 883
Harley-Davidson Iron 883

Harley-Davidson Iron 883/1200
starting at $8,999
25.7-inch seat
545 lbs. (dry)

Check out our First Look Review of the 2018 Harley-Davidson Iron 1200

Harley-Davidson 1200 Custom

2019 Harley-Davidson 1200 Custom.
2019 Harley-Davidson 1200 Custom

Harley-Davidson 1200 Custom
$10,999
26.6-inch seat
562 lbs. (dry)

Honda CB300R

2019 Honda CB300R
2019 Honda CB300R (Photo by Drew Ruiz)

Honda CB300R
$4,649
31.5-inch seat
318 lbs.

Read our First Ride Review on the 2019 Honda CB300R

Honda CBR300R

2019 Honda CBR300R.
2019 Honda CBR300R

Honda CBR300R
$4,699
30.7-inch seat
357 lbs.

Honda CB500F

2019 Honda CB500F.
2019 Honda CB500F

Honda CB500F
$6,199
30.9-inch seat
415 lbs.

Honda CBR500R

2019 Honda CBR500R.
2019 Honda CBR500R

Honda CBR500R
$6,699
30.9-inch seat
419 lbs.

Honda CB500X

2019 Honda CB500X. Image courtesy Honda.
2019 Honda CB500X

Honda CB500X
$6,599 (2018 model)
31.8-inch seat
428 lbs.

Read about the updates for the 2019 Honda CB500X

Honda CB650R

2019 Honda CB650R. Images courtesy Honda.
2019 Honda CB650R

Honda CB650R
$8,899
31.9-inch seat
445 lbs.

Read our First Look Review of the 2019 Honda CB650R

Honda CBR650R

2019 Honda CBR650R. Images courtesy Honda.
2019 Honda CBR650R

Honda CBR650R
$TBD
31.9-inch seat
456 lbs.

Read our First Look Review of the 2019 Honda CBR650R

Honda CRF250L

2017 Honda CRF250L
Honda CRF250L

Honda CRF250L
$5,199
34.4-inch seat
318 lbs.

Read our review of the 2017 Honda CRF250L Rally

Honda Grom

2019 Honda Grom.
2019 Honda Grom

Honda Grom
$3,399
30-inch seat
229 lbs.

Honda Monkey

Honda Monkey
2019 Honda Monkey (Photo by Kevin Wing)

Honda Monkey
$3,999
30.6-inch seat
232 lbs.

Watch our video review of the 2019 Honda Monkey

Honda NC750X

2017 Honda NC750X
2019 Honda NC750X

Honda NC750X
$7,999 (2018 model)
32.7-inch seat
478 lbs.

Honda Shadow Phantom

2019 Honda Shadow Phantom
2019 Honda Shadow Phantom

Honda Shadow Phantom
$7,899
25.8-inch seat
549 lbs.

Honda Super Cub C125

2019 Honda Super Cub C125
2019 Honda Super Cub C125

Honda Super Cub
$3,599
30.7-inch seat
240 lbs.

Honda Rebel 300/500

2017 Honda Rebel 500
Honda Rebel 500 (Photo by Kevin Wing)

Honda Rebel 300/500
starting at $4,499
27.2-inch seat
364 lbs.

Read our First Ride Review of the Honda Rebel 500

Indian Scout Sixty

Indian Scout Sixty
Indian Scout Sixty

Indian Scout Sixty
$9,499
25.8-inch seat
542 lbs.

Read about Indian’s 2019 Scout lineup

Indian Scout

2019 Indian Scout.
2019 Indian Scout

Indian Scout
$11,999
25.8-inch seat
550 lbs.

Read about Indian’s 2019 Scout lineup

Kawasaki KLX250

2019 Kawasaki KLX250
2019 Kawasaki KLX250

Kawasaki KLX250
$5,349
35.0-inch seat (squishes way down under rider’s weight)
304 lbs.

Kawasaki Ninja 400

2018 Kawasaki Ninja 400 ABS
2018 Kawasaki Ninja 400 ABS (Photo by Kevin Wing)

Kawasaki Ninja 400
$4,999
30.9-inch seat
366 lbs.

Read our First Ride Review of the 2018 Kawasaki Ninja 400 ABS

Kawasaki Ninja 650

2019 Kawasaki Ninja 650.
2019 Kawasaki Ninja 650

Kawasaki Ninja 650
$7,399
31.1-inch seat
426 lbs.

Kawasaki Versys-X 300

2019 Kawasaki Versys-X 300.
2019 Kawasaki Versys-X 300

Kawasaki Versys-X 300
$5,499
32.1-inch seat
386 lbs.

How did the Versys-X 300 stack up against the BMW G 310 GS and Royal Enfield Himalayan? Find out in our comparison test.

Kawasaki Vulcan S

2019 Kawasaki Vulcan S.
2019 Kawasaki Vulcan S

Kawasaki Vulcan S
starting at $7,099
27.8-inch seat
498 lbs.

Read our Road Test Review of the Kawasaki Vulcan S Cafe

Kawasaki Vulcan 900

2019 Kawasaki Vulcan 900.
2019 Kawasaki Vulcan 900

Kawasaki Vulcan 900
starting at $7,999
26.8-inch seat
617 lbs.

Kawasaki W800 Cafe

2019 Kawasaki W800 Cafe
2019 Kawasaki W800 Cafe

Kawasaki W800 Cafe
$9,799
31.1-inch seat
489.5 lbs.

Kawasaki Z125 Pro

2019 Kawasaki Z125 Pro.
2019 Kawasaki Z125 Pro

Kawasaki Z125 Pro
$3,199
31.7-inch seat
225 lbs.

Kawasaki Z400

2019 Kawasaki Z400 ABS
2019 Kawasaki Z400 ABS

Kawasaki Z400
$4,799
30.9-inch seat
364 lbs.

Kawasaki Z650

2019 Kawasaki Z650.
2019 Kawasaki Z650

Kawasaki Z650
$6,999
30.9-inch seat
410 lbs.

Read our First Ride Review on the Z650 ABS here

KTM 390 Duke

2018 KTM 390 Duke
2018 KTM 390 Duke (Photo by Kevin Wing)

KTM 390 Duke
$5,449
32.7-inch seat
359 lbs.

Read our Road Test Review of the KTM 390 Duke here

Moto Guzzi V7III Stone

Moto Guzzi V7III Stone.
Moto Guzzi V7III Stone

Moto Guzzi V7III Stone
$8,490
30.3-inch seat
470 lbs.

Royal Enfield Continental GT

2019 Royal Enfield Continental GT
2019 Royal Enfield Continental GT

Royal Enfield Continental GT
$5,999
31.1-inch seat
461 lbs.

Read our road test review of the 2019 Royal Enfield Continental GT

Royal Enfield Himalayan

2018 Royal Enfield Himalayan
2018 Royal Enfield Himalayan

Royal Enfield Himalayan
$4,499
31.5-inch seat
421 lbs.

Read our first ride review of the 2018 Royal Enfield Himalayan

How did the Himalayan stack up against the Kawasaki Versys-X 300 and BMW G 310 GS? Find out in our comparison test here.

Royal Enfield Interceptor 650

2019 Royal Enfield Interceptor 650
2019 Royal Enfield Interceptor 650

Royal Enfield Interceptor 650
$5,799
31.6-inch seat
473 lbs.

Read our road test review of the 2019 Royal Enfield Interceptor 650

Suzuki Boulevard S40

2019 Suzuki Boulevard S40.
2019 Suzuki Boulevard S40

Suzuki Boulevard S40
$5,799
27.6-inch seat
381 lbs.

Suzuki Boulevard C50

2019 Suzuki Boulevard C50.
2019 Suzuki Boulevard C50

Suzuki Boulevard C50
starting at $8,299
27.6-inch seat
611 lbs.

Suzuki Boulevard M50

2019 Suzuki Boulevard M50.
2019 Suzuki Boulevard M50

Suzuki Boulevard M50
$8,699
27.6-inch seat
593 lbs.

Suzuki GSXR250R

2018 Suzuki GSX250R
2018 Suzuki GSX250R (Photo by Enrico Pavia)

Suzuki GSX250R
$4,599
31.1-inch seat
392 lbs.

Read our review of the Suzuki GSX250R

Suzuki GSX-S750

2019 Suzuki GSX-S750 ABS. Image courtesy Suzuki.
2019 Suzuki GSX-S750 ABS

Suzuki GSX-S750Z
$8,499
32.2-inch seat
469 lbs.

Suzuki SV650

2019 Suzuki SV650.
2019 Suzuki SV650

Suzuki SV650
$7,099
30.9-inch seat
432 lbs.

Read our first ride review of the 2017 Suzuki SV650

Suzuki TU250X

2019 Suzuki TU250X.
2019 Suzuki TU250X

Suzuki TU250X
$4,649
30.3-inch seat
326 lbs.

Suzuki VanVan 200

2019 Suzuki VanVan 200.
2019 Suzuki VanVan 200

Suzuki VanVan 200
$4,649
30.3-inch seat
282 lbs.

A Man on a VanVan Without a Plan…read the story here!

Triumph Street Scrambler

2019 Triumph Street Scrambler
2019 Triumph Street Scrambler (Photo by Kingdom Creative)

Triumph Street Scrambler
$11,000
31.1-inch seat
447.5 lbs. (dry)

Read our first ride review of the 2019 Triumph Street Scrambler

Triumph Street Twin

2019 Triumph Street Twin
2019 Triumph Street Twin (Photo by Kingdom Creative)

Triumph Street Twin
$9,300
29.9-inch seat
437 lbs. (dry)

Read our first ride review of the 2019 Triumph Street Twin

Triumph Street Triple

2019 Triumph Street Triple R.
2019 Triumph Street Triple R

Triumph Street Triple
$9,950
31.2-inch seat
370 lbs.

2019 Yamaha Bolt.
2019 Yamaha Bolt

Yamaha Bolt
starting at $7,999
27.2-inch seat
542 lbs.

2019 Yamaha MT-07.
2019 Yamaha MT-07.

Yamaha MT-07
$7,599
31.7-inch seat
403 lbs.

Read our road test review on the 2018 Yamaha MT-07

2019 Yamaha MT-09.
2019 Yamaha MT-09.

Yamaha MT-09
$8,999
32.3-inch seat
425 lbs.

2019 Yamaha TW200.
2019 Yamaha TW200

Yamaha TW200
$4,599
31.1-inch seat
278 lbs.

Read our review of the Yamaha TW200

2019 Yamaha V-Star 250.
2019 Yamaha V-Star 250.

Yamaha V Star 250
$4,349
27-inch seat
326 lbs.

2019 Yamaha XSR700.
2019 Yamaha XSR700.

Yamaha XSR700
$8,499
32.9-inch seat
410 lbs.

Read our first ride review of the 2018 Yamaha XSR700

We held onto our XSR700 for a long-term review; read it here

2019 Yamaha XT250.
2019 Yamaha XT250

Yamaha XT250
$5,199
31.9-inch seat
291 lbs.

2019 Yamaha YZF-R3
2019 Yamaha YZF-R3 (Photos by Brian J. Nelson)

Yamaha YZF-R3
$4,999
30.7-inch seat
368 lbs.

Read our first ride review on the 2019 Yamaha YZF-R3

Check out Rider’s Guide to New/Updated Street Motorcycles for 2019

Source: RiderMagazine.com

2019 Yamaha YZF-R3 | First Ride Review

2019 Yamaha YZF-R3
Yamaha’s top-selling motorcycle overall last year was the YZF-R3, and for 2019 it’s even better, with a noticeable suspension upgrade and a fresh new look. (Photos by Brian J. Nelson)

Glittery, feature-laden flagship products may be sexy, but in today’s world the bread-and-butter models are the ones that return the most bang for the least buck. So it’s no surprise to me that the roughly $5,000 YZF-R3 was the top-selling Yamaha motorcycle overall in 2018, a spot it swaps regularly with another inexpensive grin factory, the FZ/MT-07 (read our Road Test Review here). The R3 debuted in 2015, a bit late to the lightweight sportbike party, but it immediately impressed us with its fun factor and everyday usability.

Read our Tour Test Review of the 2016 Yamaha YZF-R3 here!

2019 Yamaha YZF-R3
Resculpted gas tank is lower and wider, the better to tuck in and hang off.

For 2019, the R3 got a makeover that included a new upside-down 37mm KYB fork with revised settings, new triple clamps, an updated KYB rear shock, new radial Dunlop Sportmax tires, a redesigned fuel tank, lower clip-ons and a facelift that ties it to its YZR-M1 (much bigger) brother. While we like the new look, it’s the suspension updates that take the littlest YZF to the next level.

2019 Yamaha YZF-R3
New gold 37mm upside-down KYB fork has a stiffer spring and increased compression and rebound damping. Single-disc, two-piston front brake is a bit disappointing, however.

Up front, the spring rate was increased by 20 percent and both rebound and compression damping were also dialed up, addressing our complaint in the 2016 test above that the fork was “spongy, with weak rebound damping letting the front-end recoil too fast from impacts.” A new cast-aluminum top triple clamp and forged-steel lower triple clamp combine with the stout USD fork to create a much more planted feel that provides better feedback than before, an immediately noticeable improvement. It’s also a better match for the 7-step preload-adjustable rear shock, which got an 11-percent stiffer spring, 10mm higher preload, increased rebound damping and, interestingly, slightly decreased compression damping.

2019 Yamaha YZF-R3
Footpegs are sporty but not too high; combined with the 30.7-inch seat, ergonomics are quite comfortable for this 5-foot, 9-inch, 34-inch-inseam rider.

Overall it works very well in combination with the steel trellis frame; as I tossed the 375-pound (claimed, wet) machine through the banked corners of Palomar Mountain, feedback from the front end let me focus on having fun rather than worry about running out of talent (or traction).

Speaking of traction, for some reason the first-gen R3 wore bias-ply tires rather than radials. An easy enough aftermarket swap, but for 2019 Yamaha has sensibly shod the R3 with proper radial Dunlop Sportmax GPR-300 rubber. We’ve had good experiences with Sportmax tires in the past, and this is no exception; the R3 stayed glued to the pavement even on damp mountain roads and when keeled all the way over on a favorite set of technical twisties. If there is a sport riding shortcoming, it’s the brakes; the meager two-piston caliper at the front and single-piston at the rear just aren’t up to the demands of what is otherwise a very capable machine.

2019 Yamaha YZF-R3
Removing the right side fairing reveals the rev-happy 321cc parallel twin. Despite low gearing it’s at its best between 6,000 and 11,000 rpm.

Under the “if it ain’t broke, don’t fix it” category is the 321cc liquid-cooled, DOHC, 4 valve-per-cylinder parallel twin, which spun out 35 horsepower at 10,600 rpm and 19 lb-ft of torque at 9,200 when we last put it on the Jett Tuning dyno. Gears first through fourth are rather low, maximizing grunt, but there’s an interesting bump in both power and torque right after 6,000 rpm.

2019 Yamaha YZF-R3
A nearly 50/50 front/rear weight distribution, updated suspension and well-matched chassis combine to make the R3 quite the capable canyon carver.

The result is impressive roll-on performance even at a high gear-to-speed ratio. For example, I found myself traveling at just under 30 mph in fifth gear, when suddenly our ride leader poured it on and pulled away. Without downshifting I whacked the throttle open, and the little R3 responded by pulling hard (relatively speaking of course) all the way to 11,000 rpm. Highly entertaining, but also practical for freeway commuters.

2019 Yamaha YZF-R3
LCD instrument includes a bar tachometer, gear indicator, speedometer, engine temperature, fuel level, clock and switchable odometer, two tripmeters, oil tripmeter, fuel reserve tripmeter and average/instant fuel economy.

And I suppose that’s the point of the R3: it’s affordable, but now it’s an even more capable sportbike that should lengthen its buyers’ “out-growing” timeframe. Yamaha’s research indicates that the average R3 owner is 32 years old, and for 63 percent of them it’s their first motorcycle. For more than three-quarters of them, the R3, likely their only bike, does double-duty as a commuter, a fact supported by my own anecdotal evidence as seen on my daily commute.

2019 Yamaha YZF-R3
Radial Dunlop Sportmax GPR-300 tires stuck well even on our cool, foggy, damp press ride.

The trick is walking (riding?) that fine line between sporty and comfy, and even with its 20mm lower clip-ons that now attach under the top triple clamp, I found the R3’s ergonomics to be a fantastic balance between the two. The day after our 140-mile press launch ride, I logged more than 154 freeway miles riding from Oceanside, California, to my home in Camarillo, and despite wearing a backpack I experienced no ill effects: no pain and no numb hands, bum or feet. Plus, despite keeping up with 75 mph California traffic, I only went through 2.4 of the 3.7 gallons in the tank, for a respectable 65 mpg.

2019 Yamaha YZF-R3
Bring a friend: the little R3 has a 353-pound load capacity.

There’s a lot to like about the 2019 Yamaha YZF-R3: good looks, sporty yet comfortable ergos on a well-balanced chassis, vastly improved suspension and a price that’s unchanged from last year ($4,999/$5,299 for the ABS model). We’ll continue to put miles on our test bike, so look for updates and a full Road Test Review in the coming weeks.

2019 Yamaha YZF-R3
The non-ABS 2019 Yamaha YZF-R3 is available in Team Yamaha Blue or Matte Black; the ABS version is available in Matte Black or Vivid White.

2019 Yamaha YZF-R3 Specs
Base Price: $4,999
Price as Tested: $5,299 (ABS model)
Warranty: 1 yr., unltd. miles
Website: yamahamotorsports.com

Engine
Type: Liquid-cooled, transverse parallel twin
Displacement: 321cc
Bore x Stroke: 68mm x 44.1mm
Compression Ratio: 11.2:1
Valve Train: DOHC, 4 valves per cyl.
Valve Insp. Interval: 26,600 miles
Fuel Delivery: EFI
Lubrication System: Wet sump, 2.7-qt. cap.
Transmission: 6-speed, cable-actuated wet clutch
Final drive: O-ring chain

Electrical
Ignition: Electronic
Charging output: 298 watts @ 5,000 rpm
Battery: 12V 7AH

Chassis
Frame: Steel diamond-type, engine as stressed member
Wheelbase: 54.3 in.
Rake/Trail: 25 degrees/3.74 in.
Seat Height: 30.7 in.
Suspension, Front: 37mm USD KYB fork, no adj., 5.1-in. travel
Rear: Single linked rear shock, adj. for spring preload, 4.9-in. travel
Brakes, Front: Single 298mm disc w/ 2-piston caliper & ABS (as tested)
Rear: Single 220mm disc w/ 1-piston caliper & ABS (as tested)
Wheels, Front: Cast aluminum, 2.75 x 17 in.
Rear: Cast aluminum, 4.00 x 17 in.
Tires, Front: 110/70R-17H
Rear: 140/70R-17H
Wet Weight (claimed, as tested): 375 lbs.
Load Capacity (claimed, as tested): 353 lbs.
GVWR: 728 lbs.

Performance
Fuel Capacity: 3.7 gals., last 0.8 gal. warning light on
MPG: 87 PON min. 64.7 avg.
Estimated Range: 240 miles
Indicated RPM at 60 MPH: 6,500

Source: RiderMagazine.com

Video: Yamaha Star Eluder Project Bike | Part 3

2018 Yamaha Star Eluder bagger project bike
Our Yamaha Star Eluder project bike is a V-twin bagger that offers more comfort, functionality and style than a stock machine. (Photo by Joe Agustin)

This is the final video in our three-part series about our Yamaha Star Eluder project bike, a collaboration between Rider magazine and Jeff Palhegyi, owner of Palhegyi Design. The goal of this project was to enhance the Eluder’s functionality and style in a way that any owner could do in his or her own garage.

Watch Part 1 of our three-part video series

Watch Part 2 of our three-part video series 

Watch Part 3 of our three-part video series:

Source: RiderMagazine.com

Yamaha Star Eluder Project Bike

2018 Yamaha Star Eluder bagger
A bone-stock 2018 Yamaha Star Eluder GT in Raven served as the platform for our customization project. (This photo courtesy Yamaha; other photos by Joe Agustin)

For 2018, Yamaha launched two all-new V-twin touring cruisers built on the same platform–the Star Venture luxury tourer and the Star Eluder bagger. Both have bold, muscular bodywork wrapped around a massive 113-cubic-inch, air-cooled V-twin, and they’re equipped with modern technology such as throttle-by-wire, riding modes, linked ABS brakes and full infotainment systems.

The Venture is designed for two-up touring. With no trunk and fewer bells and whistles, the lighter, less expensive Eluder is for riders who do more solo riding and prefer a leaner, more aggressive look.

Read our 2018 Yamaha Star Eluder first ride review

2018 Yamaha Star Eluder bagger
Before the project began, Jeff Palhegyi and Senior Editor Greg Drevenstedt went out on a ride on two stock Yamaha Star Eluders.

We like the Star Eluder’s generous low-end torque, handling and touring amenities. But what’s a bagger without some customization? For years Yamaha’s Star Motorcycles tagline was, “We build it. You make it your own.” So that’s what we did…with some help.

2018 Yamaha Star Eluder bagger Jeff Palhegyi Greg Drevenstedt
Designer Jeff Palhegyi (left) and Senior Editor Greg Drevenstedt with a stock 2018 Yamaha Star Eluder, in Palhegyi’s shop in Santee, California.

We teamed up with Jeff Palhegyi, owner of Palhegyi Design, on a Star Eluder project bike. Known for his customized cruisers, vintage race bikes, flat trackers and more, Palhegyi has been involved with Yamaha’s product planning division for nearly three decades. The goal of this project was to enhance the Eluder’s functionality and style in a way that any owner could do in his or her own garage, and Palhegyi helped us make it a reality.

Watch the first video in our three-part series about this project to see what Palhegyi suggested we do to upgrade our Eluder:

Functionality
For this project, we started with a stock Star Eluder in Raven (black) with the GT option package ($1,500), which adds GPS navigation, SiriusXM satellite radio (subscription required), CB radio and a security alarm. During the development of the Venture and Eluder, a full line of accessories was created and developed in tandem with the motorcycles. To add some functionality to our Eluder GT, we first dug into Yamaha’s accessory catalog.

2018 Yamaha Star Eluder bagger project bike Jeff Palhegyi
To improve wind protection, Palhegyi installed a taller windshield and side wind deflectors from Yamaha’s accessory catalog.

Our first addition to the project was an Elite 801 Series helmet headset and connection cord to enhance audio quality and enable more functionality than Bluetooth alone. Made by J&M Motorcycle Audio, the headset and cord are available directly from Yamaha. Next we added more wind protection with a taller windshield and adjustable lower fairing wind protectors. We improved nighttime visibility with a set of LED fog lights and enhanced cold-weather comfort with a set of heated grips and heated apparel outlets for the rider and passenger, all of which are easy-to-install, plug-n-play items.

2018 Yamaha Star Eluder bagger project bike Jeff Palhegyi
To provide more security for a passenger and luggage capacity, Palhegyi installed Yamaha’s accessory quick-release backrest and luggage rack.

To add more comfort for the passenger, we added a quick-release passenger backrest (for aesthetic reasons we chose the short version), which has durable steel uprights with a black powdercoat finish. Yamaha also makes a matching luggage rack that attaches directly to the backrest, adding extra luggage capacity (the Eluder’s two locking saddlebags and several small fairing pockets hold a total of 72 liters). A perfect fit for the luggage rack is Nelson-Rigg’s 20-liter Day Trip Backrest Bag, and its black UltraMax fabric matches the Raven paint and other black finishes on our Eluder.

2018 Yamaha Star Eluder bagger project bike Jeff Palhegyi
Corbin’s Dual Heated Saddle provides rider and passenger heating and it is topped with a distressed-leather Black Bomber Jacket cover with diamond stitching.

One of the Eluder’s key features is its ultra-low seat height of 27.6 inches, and the plush, heated seat has a rear bolster for lumbar support. In the name of both functionality and style, we replaced the stock seat with a Heated Dual Saddle from Corbin, which has a seating area covered with distressed leather in a Black Bomber Jacket finish (which looks dark gray), gray diamond-pattern stitching and matte-black vinyl sides. Whereas the heating for the Eluder’s stock seat is controlled through the infotainment system’s menu, the Corbin seat has an on/off toggle switch on the left side. We also added Corbin’s matching passenger backrest pad to complete the look.

Style
Yamaha’s accessory catalog has many bolt-on parts to give the Eluder a custom look. We installed Yamaha’s billet brake pedal and toe shift lever (a billet heel shifter is also available, but we left it off to allow more room on the floorboard). Yamaha also offers a long list of billet covers and add-ons with a black-and-silver contrast-cut finish that are made by Arlen Ness. We installed speaker and instrument bezels, an upper handlebar clamp, muffler tips, a license plate frame and covers for the master cylinders, generator, clutch, cam and pulley.

2018 Yamaha Star Eluder bagger project bike Jeff Palhegyi
Yamaha’s accessory catalog has a long list of contrast-cut billet covers made by Arlen Ness, which give the Eluder a custom look.

Finally, we wanted to give the Eluder’s bodywork a custom look, but we wanted to avoid bold, garish paint or graphics. The Raven-colored Eluder and all of the black bolt-on parts are cohesive and understated, best appreciated up close than from a block away. To enhance the dark, low-profile look, Palhegyi suggested a vinyl wrap, which is popular in the automotive industry but hasn’t really caught on yet in the motorcycling world. A full wrap would cover up the glossy Raven paint, and the complex shapes of the Eluder’s bodywork made a full wrap impractical.

2018 Yamaha Star Eluder bagger project bike
After using tape to create a template, Palhegyi created a computer scan of the template and had BlacArt create the metallic vinyl graphics.

Instead, Palhegyi used painter’s tape to create a template for graphic panels that flow with the lines of the Eluder’s bodywork–on the fairing and front fender, on the tank, on the side panels and on the saddlebags. He scanned the templates and sent them to Cory Bender at BlacArt Creative Group, who converted the templates into vinyl adhesive panels with a dark metallic finish, a silver-and-red double pinstripe border and a few tastefully placed Rider logos. With great care, a soft-plastic spreader (to remove any air bubbles) and a blowtorch (to heat and set the adhesive), the panels were applied to the bike, giving it a one-of-a-kind look.

2018 Yamaha Star Eluder bagger project bike
Applying the vinyl graphics correctly is a challenge that may be best left to a professional vinyl graphics or automotive wrap installer.

Creating and applying the vinyl graphics was the most time-consuming and difficult part of this project. Palhegyi’s team and BlacArt’s team are professionals, so unless you have experience with the vinyl application process we recommend working with a qualified installation specialist.

Watch the second video to see the installation process for our Star Eluder project bike:

2018 Yamaha Star Eluder bagger project bike
The end result of this Star Eluder project is a V-twin bagger that offers more comfort, functionality and style than a stock machine.

That’s A Wrap
With the accessories installed and graphics applied, it was time to take our Eluder GT project bike out for a spin. From Palhegyi’s shop near San Diego, California, we went for a scenic ride on a cold, clear November day. The taller windshield and side deflectors kept the cockpit more calm and quiet, and the heated grips and seat helped keep the cold at bay.

2018 Yamaha Star Eluder bagger project bike
Out in the sunshine, the Star Eluder’s metallic graphics and contrast-cut billet parts look fantastic. The bike’s overall look is cohesive and subtle, best appreciated up close.

The Comfort Cell foam in the wide, flat Corbin seat is firm at first but breaks in with miles, and we like the distressed look. The flatter pillion seat and quick-release backrest provide a more secure perch for a passenger, and the Nelson-Rigg bag is the perfect place to stash extra gear. Removing the backrest, luggage rack and bag, which takes only a few seconds, transforms the Eluder from a two-up tourer back into a low-profile solo bagger. Out in the sunshine the contrast-cut billet parts and metallic graphics look really sharp, boosting the Eluder’s curb appeal without going too far.

2018 Yamaha Star Eluder bagger project bike
Off-the-shelf factory and after-market accessories make a build like this something anyone can do.

Scroll down for more photos and a complete build list with accessories, prices and resources.

Check out the final installment of our video series:

2018 Yamaha Star Eluder bagger project bike
A taller windshield, side deflectors and understated vinyl graphics add to the Star Eluder’s functionality and style.
2018 Yamaha Star Eluder bagger project bike
The billet brake pedal and shift lever (not shown) and Arlen Ness contrast-cut covers give the Eluder a custom look.
2018 Yamaha Star Eluder bagger project bike
Corbin’s Dual Heated Saddle and matching passenger backrest pad improve comfort and give the Eluder a unique look.
2018 Yamaha Star Eluder bagger project bike
Nelson-Rigg’s 20-liter Day Trip Backrest Bag is a perfect fit for Yamaha’s accessory luggage rack.
2018 Yamaha Star Eluder bagger project bike
Removing the quick-release passenger backrest and luggage rack (which come off as a single unit) takes only a few seconds and gives the Star Eluder a low-profile, solo look.

Build List: Accessories, Prices and Resources

Genuine Yamaha Accessories (shopyamaha.com) Price
Elite 801 Series Helmet Headset System by J&M Motorcycle Audio $219.99
Elite 801 Series Connection Cord by J&M Motorcycle Audio $89.99
Eluder Custom Windshield – Medium $169.99
Touring Lower Fairing Wind Deflectors $249.99
Touring LED Fog Lights $359.99
Touring Heated Apparel Outlet, Rider $59.99
Touring Heated Apparel Outlet, Passenger $59.99
Eluder Heated Rider Grips $279.99
Quick-Release Passenger Backrest, Uprights, Short $366.99
Quick-Release Passenger Backrest, Docking Kit $133.99
Rear Luggage Rack $163.99
Touring Billet Toe Shift Lever $195.99
Touring Billet Brake Pedal Cover $121.99
Arlen Ness Signature Custom Billet Speaker Bezels $159.99
Arlen Ness Signature Custom Billet Instrument Bezels $109.99
Arlen Ness Signature Custom Billet Master Cylinder Cover Set $149.99
Arlen Ness Signature Custom Billet Upper Handlebar Clamp $99.99
Arlen Ness Signature Custom Billet Generator Cover $159.99
Arlen Ness Signature Custom Billet Clutch Cover $159.99
Arlen Ness Signature Custom Billet Cam Cover $99.99
Arlen Ness Signature Custom Billet Pulley Cover $159.99
Arlen Ness Signature Custom Billet Muffler Tips $279.99
Arlen Ness Signature Custom Billet License Plate Frame $99.99
Corbin (corbin.com)
Heated Dual Saddle $633.00
Coordinating Sissy Bar Pad $343.00
Nelson-Rigg (nelsonrigg.com)
Day Trip Backrest Bag $99.95
BlacArt Creative Group ([email protected])
Vinyl Graphics (materials) $400.00
Vinyl Graphics (installation) $150.00
TOTAL $5,268.74

 

 

 

 

Source: RiderMagazine.com

Video: Yamaha Star Eluder Project Bike | Part 2

Yamaha Star Eluder Jeff Palhegyi Project Bike
Our Yamaha Star Eluder project bike, created by Jeff Palhegyi, features bolt-on accessories and custom graphics. (Photo by Joe Agustin)

We teamed up with Jeff Palhegyi, owner of Palhegyi Design, on a Yamaha Star Eluder project bike. Known for his customized cruisers, vintage race bikes, flat trackers and more, Palhegyi has been involved with Yamaha’s product planning division for nearly three decades. The goal of this project was to enhance the Eluder’s functionality and style in a way that any owner could do in his or her own garage.

Watch Part 1 of our three-part video series 

Yamaha Star Eluder Jeff Palhegyi Project Bike
Jeff Palhegyi installing contrast-cut billet parts from Yamaha’s accessory catalog. (Photo by Joe Agustin)

Check out Part 2 of our three-part video series about the project: 

Source: RiderMagazine.com

Video: Yamaha Star Eluder Project Bike | Part 1

2018 Yamaha Star Eluder
Test riding the 2018 Yamaha Star Eluder before the project begins. (Videography and photography by Ray Gauger and Joe Agustin)

New for 2018, the Yamaha Star Eluder is a bagger built on the same platform as the Star Venture. Both have bold, modern bodywork wrapped around a massive, 113-cubic-inch, air-cooled V-twin, and they’re equipped with contemporary technology such as throttle-by-wire, riding modes, linked ABS brakes and a full infotainment system.

The Venture is designed for two-up touring. With no trunk and fewer bells and whistles, the lighter, less expensive Eluder is for riders who do more solo riding and prefer a leaner, more aggressive look.

Read our 2018 Yamaha Star Eluder first ride review

We like the Star Eluder’s generous low-end torque, its handling and its touring amenities. But what’s a bagger without some customization? For years Yamaha’s Star Motorcycles division’s tagline was, “We build it. You make it your own.”

2018 Yamaha Star Eluder in Raven
The 2018 Yamaha Star Eluder in Raven. We selected the black color scheme for our project bike.

We teamed up with Jeff Palhegyi, owner of Palhegyi Design, on a Star Eluder project bike. Known for his customized cruisers, vintage race bikes, flat trackers and more, Palhegyi has been involved with Yamaha’s product planning division for nearly three decades. The goal of this project was to enhance the Eluder’s functionality and style in a way that any owner could do in his or her own garage.

Check out Part 1 of our three-part video series about the project: 

Source: RiderMagazine.com