The updated 2022 Yamaha XSR900, getting put through its paces on California Route 33. Photo by Adam Campbell.
We test the updated 2022 Yamaha XSR900, which sports new livery inspired by the ’80s-era Sunauto Yamaha GP team. The Legend Blue colorway shown above has gold fork legs and gold wheels, as well as yellow graphics with a contrasting light blue panel on the tank. The XSR is also available in all-black Raven.
In addition to refreshed styling, part of the XSR900’s update included the revised CP3 (Crossplane 3-cylinder) engine and 6-axis IMU also found on the MT-09 and Tracer 9 GT (which won Rider‘s 2021 Motorcycle of the Year award). It also gest a new tubular-steel subframe, a longer swingarm, and a Brembo radial front master cylinder.
Child of the ’60s meets Bud Ekins’ 1915 Harley-Davidson in 1978. (Photo by Robin Riggs)
Looking through a file folder named “Cars & Bikes” on my computer the other day, I noticed that in 50 years of riding, I’ve experienced nearly the entirety of motorcycle history. From 1915 Indian board-track racers to a 2022 KTM 1290 Super Duke R Evo, that’s 108 model years’ worth. And in between were tests, rides, or races on more machines from every decade. Hardly planned, this all resulted from simply loving to ride, being curious, and, most of all, saying yes at every chance. Here are some of my favorite moto memories, one apiece covering 12 decades.
1915 Harley-Davidson Model 11-F
In 1978, Cycle magazine gave me an assignment after I joined the staff: Write a feature about anything I wanted. Interested in the history of our sport, I replied that I’d like to ride a really old bike. “Call this guy,” the editor said, handing me the number of Bud Ekins, an ISDT gold medalist and the stuntman in the epic The Great Escape jump scene.
More than a century after its manufacture, this modified 1915 Harley-Davidson 11-F completed the cross-country Motorcycle Cannonball. (Photo by SFO Museum)
In his enormous shop, Ekins reviewed the starting drill for his 1915 Harley-Davidson Model 11-F: Flood the carb, set the timing and compression release, crack the throttle, and then swing the bicycle-style pedals hard to get the V-Twin’s big crankshaft spinning. When it lit off, working the throttle, foot clutch, and tank-mounted shifter – and steering via the long tiller handlebar – were foreign to a rider used to contemporary bikes. But coordination gradually built, and after making our way to the old Grapevine north of Los Angeles, I found the 998cc engine willing and friendly, with lots of flywheel effect and ample low-rpm torque to accelerate the machine to a satisfying cruising speed of about 45 mph. And its rider to another time and place.
On a lucky trip to New Zealand, McIntosh Racing founder Ken McIntosh let me race his special Norton Model 18 in the Pukekohe Classic Festival. Unlike the exotic Norton CS1 overhead-camshaft model that likewise debuted in 1927 – a big advancement at the time – the Model 18 TT Replica used a tuned version of the company’s existing 490cc pushrod Single engine. Its name was derived, fittingly, from the sterling Model 18 racebike’s multiple Isle of Man TT wins. As such, the production TT Replica had as much racing provenance as you could buy at the time.
The author aboard New Zealander Ken McIntosh’s 1927 Norton Model 18 TT Replica, which reached 80 mph on track. (Photo by Geoff Osborne)
I found it surprisingly capable, delivering a blend of strong power (a digital bicycle speedometer showed a top track speed of80 mph) and predictable, confident handling – despite the girder-style fork and hardtail frame. However, lacking gear stops in its selector mechanism, the 3-speed gearbox required careful indexing to catch the correct gear. But once I got the process down, the bike was steady, swift, and utterly magical, like the Millennium Falcon of Singles in its time.
When a friend handed me his 4-cylinder Nimbus, it had big problems. The engine was locked solid, and my buddy wanted to get it running and saleable. Built in Denmark, the Nimbus is unique for several reasons. One is its 746cc inline-Four engine. Rather than being mounted transversely like modern multis, it was positioned longitudinally in the frame, with power flowing rearward via shaft drive. Interestingly, the rocker-arm ends and valve stems were exposed and, when the engine was running, danced a jig like eight jolly leprechauns. The frame was equally curious, comprised of flat steel bars instead of tubing, and riveted together. With a hacksaw, hammer, and some steel, you could practically duplicate a Nimbus frame under the apple tree on a Calvin and Hobbes Lazy Sunday.
Bob Sinclair, former CEO of Saab Cars USA, loved motorcycles. He’s riding a Nimbus Type C sidecar rig with a furry friend as co-pilot. (Sinclair Family Archives)
Anyway, the seized engine refused to budge – until I attempted a fabled fix by pouring boiling olive oil through the spark-plug holes to expand the cylinder walls and free up the rings. Additionally, I judiciously added heat from a propane torch to the iron block. Eventually, the engine unstuck and, with tuning, ran well. But the infusion of olive oil created a hot mist that emanated from the exposed valvetrain, covering my gear and leaving behind an olfactory wake like baking Italian bread.
1949 Vincent Black Shadow
One blissful time, years before Black Shadows cost six figures, I was lucky enough to ride one. Seemingly all engine, the Black Shadow was long and low, with its black stove-enamel cases glistening menacingly, and its sweeping exhaust headers adding a sensual element to an otherwise purely mechanical look.
Unquestionably the superbike of its day, Vincent’s 998cc Black Shadow was simultaneously elegant and menacing, and a big 150-mph speedometer let the rider know it. This is a 1952 model. (Photo by Clement Salvadori)
Thanks to the big, heavy flywheels and twin 499cc cylinders, starting the Vincent took forethought and commitment. And once the beast was running, so did riding it. A rude surprise came as I selected 1st gear and slipped the clutch near the busy Los Angeles International Airport. Unexpectedly, the clutch grabbed hard, sending the Shadow lurching ahead. The rest of the controls seemed heavy and slow compared to the Japanese and Italian bikes I knew at the time – especially the dual front brakes. The bike was clearly fast, but glancing at the famous 150-mph speedometer, I was chagrined to find that I’d only scratched the surface of the Black Shadow’s performance at 38 mph.
1955 Matchless G80CS
Despite not being a Brit-bike fan in particular, I’ve owned five Matchlesses, including three G80CSs. Known as a “competition scrambler,” in reality the CS denotes it as a “competition” (scrambles) version of the “sprung” (rear-suspension equipped) streetbike. Power comes from a 498cc long-stroke 4-stroke pushrod Single of the approximate dimensions of a giant garden gnome. Starting a G80CS requires knowing “the drill” – retarding the ignition, pushing the big piston to top-dead-center on compression, and giving the kickstart lever a strong, smooth kick all the way through. This gets the crank turning some 540 degrees before the piston begins the compression stroke again.
A true garage find, this 1955 Matchless G80CS hadn’t been used since 1966. Now resurrected, the long-stroke 498cc pushrod Single shoves the desert sled ahead like the rapid-fire blasts of a big tommy gun. (Photo by John L. Stein)
Once going, the engine fires the G80CS down the road with unhurried explosions. Then at 50 mph or so, the Matchless feels delightfully relaxed; vibration is low-frequency and quite tolerable, and the note emanating from the muffler is a pleasant bark –powerful but not threatening. It is here, at speeds just right for country roads, that the G80CS feels most in its element as a friendly, agreeable companion. With such a steady countenance, it’s no wonder that G80CS engines powered tons of desert sleds. I just wouldn’t want to be stuck in a sand wash on a 100-degree day with one that required more than three kicks to start.
During Ducati’s infancy, the Italian firm concocted a249cc overhead-cam roadster named the Diana. Featuring a precision-built unit-construction engine like Japanese bikes, it offered an essential difference: being Italian. And that meant all sorts of wonderful learning, as I discovered when, as a teen, I bought a “basket-case” Diana. The term isn’t used much anymore, but it means something has been disassembled so thoroughly that its parts can be literally dumped into a basket. In the case of this poor ex-racer, literally everything that could be unscrewed or pried apart was. The engine was in pieces, the wheels were unspoked, the frame and fork were separated, and many parts were missing.
The author aboard his basket-case 1961 Ducati Diana. (John L. Stein archives)
Its distress repelled my friends but inspired me. Upon acquiring it, a year of trial-and-error work included rebuilding the scattered engine, designing and welding brackets onto the frame for a centerstand and footpegs, assembling the steering, fabricating a wiring harness, and ultimately tuning and sorting. This basket-case Ducati literally taught me the fundamentals of motorcycle mechanics, by necessity. And due to the racy rear-set controls I’d crafted, the machine had no kickstarter, necessitating bump-starting everywhere, every time.
The bike was never gloriously fast, but it carried me through my first roadrace at the Ontario Motor Speedway. After selling it, I never saw it again. Rest in peace, fair Diana. And by the way, the California blue plate was 4C3670. Write if you’ve seen it!
1971 Kawasaki Mach III
Stepping from an 8-hp Honda 90 onto a friend’s Mach III, which was rated at 60 hp when new, was the biggest shock of my young motorcycling life. I knew enough to be careful, not only because of the 410-lb heft of the Kawasaki compared to the Honda’s feathery 202 lb, but because the Mach III had a reputation as a barn-burner. It was true. Turning the throttle grip induced the moaning wail from three dramatic 2-stroke cylinders, and propelled the Kawasaki ahead with a ferocity I’d never come close to feeling before.
Rated at 60 horsepower, the Kawasaki Mach III (officially known as the H1) was the quickest-accelerating production motorcycle of its time. (Photo by John L. Stein)
In those first moments of augmented g-forces, I distinctly felt that the acceleration was trying to dislocate my hips. In reality, it was probably just taxing the gluteus muscles. But regardless, I remember thinking, “I’ll never be able to ride one of these.” That clearly wasn’t true, but the memory of the Mach III’s savage acceleration and whooping sound remains indelible. Additionally, the engine vibration was incessant – there was simply no escaping it – and in those pre-hydraulic disc days for Kawasaki, the drum brakes seemed heavy and reluctant, even to a big-bike novice. Glad I found out early that the Mach III’s mad-dog reputation was real.
1985 KTM 500 MXC
If Paul Bunyan designed a motorcycle, this KTM 2-stroke would be it. For its day, the 500 MXC was extraordinary at everything, such as extraordinarily hard to start; the kickstart shaft was a mile high and the lever arm even higher. At over6 feet tall in MX boots, I still needed a curb, boulder, or log handy to effectively use the left-side kickstarter. The motor had so much compression (12.0:1) that this Austrian Ditch Witch practically needed a starter engine to fire the main one. Once, I was stuck on a desert trail with the MXC’s engine reluctant to re-fire. Not so brilliantly, I attached a tow line to my friend’s Kawasaki KX250 and he pulled me to perhaps 25 mph on a nearby two-lane road. Before I could release the line and drop the clutch, my buddy slowed for unknown reasons. Instantly the rope drooped, caught on the KTM’s front knobby, and locked the wheel, slamming the bike and its idiot rider onto the asphalt. The crash should have broken my wrist, but an afternoon spent icing it in the cooler put things right.
A beast to start and a blast to ride, this 1985 KTM 500 MXC 2-stroke was also comically and maddeningly tall. So was the desk-high kickstart arm. But, oh my, how the Austrian Ditch Witch could fly. (Photo by John L. Stein.)
When running, though, the MXC was spectacular. Capable of interstate speeds down sand washes and across open terrain, the liquid-cooled 485cc engine was a maniacal off-road overlord. The suspension included a WP inverted fork and linked monoshock with an insane 13.5 inches of travel out back. I bought the 500 MXC used for $500, and I had to practically give it away later. But now, I wish I had kept it, because it was fully street-plated – ideal for Grom hunting in the hills today.
1998 Yamaha YZF-R1
On a deserted, bucolic section of Pacific coastal backroads, I loosened the new Yamaha R1’s reins, kicked it in the ribs, and let it gallop. And gallop it did, at a breathtaking rate up to and beyond 130 mph. That’s not all that fast in the overall world of high performance, but on a little two-lane road edged by prickly cattle fences and thick oaks, it ignited all my senses. What had been a mild-mannered tomcat moments before turned into a marlin on meth, but it wasn’t the velocity that was alarming.
Superbike tech leapt ahead with Yamaha’s YZF-R1. Its performance rang every alarm bell in the author’s head. (Photos by Yamaha)
No, the point seared into my amygdala was how hard the R1 was still accelerating at 130 mph. Rocketing past this speed with a ratio or two still remaining in the 6-speed gearbox sounded every alarm bell in my head, so I backed down. Simply, the R1 rearranged my understanding of performance. But simultaneously, it made every superbike of the 1970s, including the King Kong 1973 Kawasaki Z1 – the elite on the street in its era – seem lame by comparison.
2008 Yamaha YZ250F
After 25 years away from motocross, in 2008 I bought a new YZ250F and went to the track. Oh, my word. The dream bikes of my competitive youth – Huskys, Maicos, Ossas, and their ilk – faded to complete irrelevance after one lap at Pala Raceway on the modern 4-stroke. Naturally it was light, fast, and responsive, but the party drug was its fully tunable suspension. By comparison, everything else I’d ridden in the dirt seemed like a pogo stick. Together, the awesome suspension and aluminum perimeter frame turned motocross into an entirely different sport, and I loved it anew.
Contemporary technology turned riding motocross from torture in the sport’s early years to the best workout – like simultaneously using every machine in the gym at maximum effort. Training and racing this 2008 Yamaha YZ250F produced heartrates just shy of running a 10k race. (John L. Stein Archives)
In retrospect, the glorious old MX bikes were dodgy because real skill was required to keep them from bucking their riders into the ditch. But, surprisingly, I found motocross aboard this new machine still merited hazard pay, for two reasons: 1) Thanks to the bike’s excellent manners, I found myself going much faster; and 2) Tracks had evolved to include lots of jumps, sometimes big ones. Doubles, step-ups, table-tops – I later paced one off at Milestone MX and realized the YZ was soaring more than 70 feet through the air.
2017 Yamaha TW200
There’s something about flying low and slow that’s just innately fun. Just ask the Super Cub pilots, lowrider guys, or Honda Monkey owners. After a day in the Mojave, plowing through sand, sliding on dry lake beds, and dodging rocks and creosote bushes, Yamaha’s TW200 proved equally enamoring. Yes, it’s molasses-slow, inhaling hard through the airbox for enough oxygen to power it along. And it’s built to a price, with an old-school carburetor and middling suspension and brakes.
For flying low and slow on a dry lake bed, the fat-tire Yamaha TW200 is righteous. Learn to dirt-track early in life, and the skills last forever. (Photo by Bill Masho)
Nonetheless, its fat, high-profile tires somehow make it way more than alright, kind of like riding a marshmallow soaked in Red Bull. Curbs? Loading docks? Roots, ruts, and bumps? Scarcely matters at 16 mph when you’re laughing your head off. Top speed noted that day was a bit over 70 mph – good enough for freeway work, but just barely. So, actually, no. But throttling the TW all over the desert and on city streets reminded me just how joyous being on two wheels is.
Building from its supercharged Ninja H2 hyperbike, Kawasaki launched the naked Z H2 for 2020. Lucky to attend the press launch for the bike that year, I got to experience this 197-hp missile on a road course, freeways, backroads, and even a banked NASCAR oval. The latter was, despite its daunting concrete walls, an apropos vessel to exploit the bike’s reported power. Weighing 527 lbs wet, the Z H2 has a 2.7:1 power-to-weight ratio – nearly twice as potent as the 2023 Corvette Z06.
Exploiting Kawasaki’s 197-horsepower Z H2 definitely required a racetrack. (Photo by Kawasaki)
Supercharged engines are known for their low-end grunt, and the Z H2 motor was happy to pull at any rpm and in any gear. But it fully awakened above 8,000 rpm, as the aerospace-grade supercharger began delivering useful boost. From here on, the job description read: Hang on and steer. Free to pin it on the road course and oval, I did. And not for bravado’s sake – I really wanted to discover the payoff of having so much power. As it turns out, a supercharged liter bike dramatically shrinks time and space, making it a total blast on the track – and absolute overkill on the road. Watch where you aim this one.
Based in Southern California, John L. Stein is an internationally known automotive and motorcycle journalist. He was a charter editor of Automobile Magazine, Road Test Editor at Cycle, and served as the Editor of Corvette Quarterly. He has written for Autoweek, Car and Driver, Motor Trend, Cycle World, Motorcyclist, Outside, and other publications in the U.S. and abroad.
So you’re out on the market to get your hands on a kickass motorcycle at a bargain price.
You hop on the local search engine algorithms, scroll a titch and find a beauty that advertises herself as ‘one of a kind,’ ‘single-owner’ and ‘good as new.’
While those claims sound heavenly (and may very well match the bike), there’s more than one way to fool a system – which is why Yamaha’s decided to invest in the safety of the client’s wallet by creating a platform for their used machines.
A view of Yamaha motorcycles in the bid to debut Yamaha’s “Certified Pre-Owned” platform in the EU. Photo courtesy of Yamaha EU.
With integrity now firmly rooted via proven paperwork and transparency, buying a Yammie bike has never been easier – and this new platform – christened “Certified Pre-Owned YAMAHA” – will be saving a world of worry for future hooners looking to upgrade, downgrade, or just buy a bike that will do what the advert says.
So how does this platform work?
A view of Yamaha motorcycles in the bid to debut Yamaha’s “Certified Pre-Owned” platform in the EU. Photo courtesy of Top Speed.
We’re told by Top Speed that the application for any bike to get on the platform is extremely strict. A comprehensive mileage investigation, proof of outstanding payment completion and research of the bike’s past are just a few of the tiers used to filter the lineups.
This includes checking to make sure that ‘the bike has not been stolen or subject to an insurance write-off.’
There are perks to using the platform as the seller, too.
A view of Yamaha motorcycles in the bid to debut Yamaha’s “Certified Pre-Owned” platform in the EU. Photo courtesy of Motorcycle Cruiser.
“Any Yamaha that passes the Certified Pre-Owned examination will be marketed with a 12 months warranty and Yamaha Motor Roadside Assistance,” continues the press release.
A simple search function allows customers to ‘view by model type and location,’ with every bike quality checked (each entry even comes with roadside assistance).
A view of Yamaha motorcycles in the bid to debut Yamaha’s “Certified Pre-Owned” platform in the EU. Photo courtesy of Top Speed.
The list of to-do’s for the seller to check are as follows, according to Yamaha’s EU website:
The VRN and VIN of the vehicle are compared against [the Yamaha] database
All vehicles must have a full service history
If over three years old, the vehicle must:
Have a valid MOT certificate
Pass a 49-point PTW/47-point Scooter check sheet
A view of Yamaha motorcycles in the bid to debut Yamaha’s “Certified Pre-Owned” platform in the EU. Photo courtesy of Top Speed.
Drop a comment letting us know what you think – we love hearing from you.
Be sure to also check back for more of the best of the latest here at MBW, and as ever – stay safe on the twisties.
A European press release from Italy is talking about Yamaha’s recent move to make their popular XSR900 A2-compliant, in an effort to reach a wider range of riders – and rumors are saying that the trimmed machine will possibly be in European markets as early September.
A quarter view of this year’s XSR900. Photo courtesy of CycleWorld.
“Riders must be at least 18 years old to obtain an A2 license,” explains a report from RideApart.
“Bikes within the category must not exceed 47 horsepower, and riders must keep the A2 status for two years before moving up to the full A license. Unless the rider is 24 years of age or older, they cannot skip the intermediate A2 class, forcing many youngsters to learn the ropes on more manageable bikes.”
A quarter view of this year’s XSR900. Photo courtesy of MotoWorld.
We can’t wait to see how Yammie will be refreshing the XSR900 to comply with those regulations. Stay tuned, since the hints of a September drop for this beastie will likely mean upcoming updates as to how the brand plans on going about the XSR900’s refresh.
Drop a comment letting us know what you think, and as ever – stay safe on the twisties.
Yamaha Motor Corporation, USA, is pleased to partner with the Rookies of ’79 and Friends charity for the 2022 season in an effort to help raise funds to support injured flat track riders and their families. Yamaha has elected to donate a brand new 2022 YZF-R7 accessorized in World GP 60th Anniversary livery and gold wheels to be raffled off in a season-long fundraiser in conjunction with the 2022 American Flat Track (AFT) race series. Tickets to the raffle will be sold at each AFT round, and a winner will be drawn at the final round of the championship at Volusia Speedway in Florida on October 15, 2022. Additionally, Yamaha is also donating one free year of Yamaha Extended Service (Y.E.S.) warranty coverage on the R7.
“I’m proud and pleased that we were able to donate this Yamaha YZF-R7 to the Rookies of ’79 charity, allowing them to raise money to achieve their mission of helping riders and families in need,” said Yamaha Motorcycle Product Line Manager Derek Brooks. “They are a fantastic organization that does incredible work for the racing community. And as an ex-flat tracker myself, it’s a cause very near and dear to my heart.”
Founded by a group of friends and former professional dirt track racers who made up the legendary rookie class of 1979 from the Golden Era of American flat track racing, the Rookies of ’79 and Friends charity was launched with the mission to provide financial assistance to injured flat track motorcycle riders and their families in their times of greatest need. A fan-based charity, Rookies of ’79 raises funds mostly through sales and raffles of donated memorabilia, as well as donations from fans, fellow riders, and corporate sponsors. Money raised helps provide an immediate safety net for amateur and professional riders who often find themselves left with staggering costs and inadequate insurance coverage following injuries suffered while pursuing their passion of racing.
“The Rookies of ’79, the official charity of American Flat Track, is blessed and honored to be partnered with Yamaha Motor Corp. for the 2022 season,” said Rookies of ’79 Executive Director Charlie Roberts. “Yamaha has provided the charity with a new Yamaha 2022 YZF-R7 for use as our featured raffle bike for the season. The bike will be customized in the iconic white and red World GP 60th Anniversary likeness and will be available for viewing at all American Flat Track events. Yamaha’s generosity with this donation in support of the charity’s mission, supporting injured racers and their families, as well as their support of Estenson Racing, is a true testament to their commitment to American flat track racing. Rookies of ’79 is proud to be part of the Yamaha family!”
For fans or supporters wanting to buy a raffle ticket for the 2022 Yamaha YZF-R7, Rookies of ’79 merchandise, memorabilia or to simply make a donation, please visit the Rookies of ’79 website at rookies79.com or visit the Rookies of ’79 tent at American Flat Track national events and a variety of regional flat track events throughout the 2022 racing season.
Road testing the 2019 Tracer 900 GT in Washington’s Klickitat River valley, with Mount Adams in the background. (Photos by the author & Brian J. Nelson)
Winding through a dark canopy of evergreens, the road played hide-and-seek with the Clackamas River, offering a glimpse here and there of clear water pouring over rocks as it made its way downstream to the Willamette, then the Columbia, and finally the Pacific. A break in the canopy was like popping out of a tunnel and I set my eyes on a patch of gravel next to the road, just a few feet from where the river made a sharp turn. Down went the Yamaha Tracer 900 GT kickstand, off went the ignition. I hadn’t seen a car for miles. It was just me and the trees and the river. Just what I was looking for.
Emerging from a dark tunnel of trees on the West Cascades Scenic Byway, I found the perfect sunny spot to enjoy the sights and sounds of the Clackamas River.
The previous day I logged 250 miles aboard the Yamaha at the bike’s press launch. The event was based in Stevenson, Washington, a small town in the heart of the Columbia River Gorge National Scenic Area, and I spent a long, hot day testing the GT on local backroads. Weighing just 500 pounds and packing a punch from its 847cc inline-Triple, the Tracer 900 GT is a light, agile, comfortable sport-tourer, perfect for a solo traveler. Yamaha entrusted me with the keys to one for the long ride home to Southern California.
With snow-capped volcanic peaks, wild and scenic rivers, dense evergreen forests, and countless roads that follow the contours of the land, the Cascade Range is a motorcyclist’s paradise.
For years I’ve heard and read about how good the riding is in the Cascades, a mountain range that runs from British Columbia down through Washington and Oregon to Northern California. Whenever possible, I like to fill in the blank spots on my mental map –to experience first-hand what roads and scenery are really like. So I sketched out a route from the Columbia River to the California border that zigzags several times over the Cascades, winds its way through four national forests and one national park, and follows three designated scenic byways. Like any good motorcycle route, it would take at least twice as long as a more direct path.
The ride route from Stevenson, Washington, to Red Bluff, California.
With the GT’s saddlebags packed and a tailbag strapped to the passenger seat, I hit the road at 6 a.m., crossing the mighty Columbia – and into Oregon – on the Bridge of the Gods, a steel truss bridge named after a natural dam that was created by a landslide at the same location nearly 1,000 years ago. The narrow, 90-year-old bridge has no pedestrian walkway, but it’s where the Pacific Crest Trail crosses the river, so weary hikers with heavy packs must contend with cars and trucks.
The Bridge of the Gods spans the Columbia River, which forms the border between Washington and Oregon.
What makes the Cascades special is its many stratovolcanoes –the cone-shaped variety we learned about in grade school –that rise thousands of feet above the surrounding mountains. I’ve ridden along the eastern side of the Sierra Nevada in California dozens of times, and every time I pass through the town of Lone Pine, I struggle to pick out Mount Whitney – the tallest mountain in the lower 48 states – from the neighboring peaks that are nearly as tall. On the Tracer 900 GT press ride we saw several volcanic peaks, Mount Adams (12,281 feet) and Mount St. Helens (8,363 feet – before it blew its top in 1980, it was 1,300 feet taller) in Washington, and Mount Hood (11,249 feet) in Oregon, standing head and shoulders above the landscape, easily visible from miles away. They’re part of the Cascade Volcanic Arc, a series of 12 volcanoes stretching from Mount Silverthorne in British Columbia to Mount Lassen in California, which is part of the Pacific Ring of Fire –more than 450 volcanoes scattered along the outer edge of the Pacific Ocean.
When Washington’s Mount St. Helens erupted in 1980, it literally blew its top, erasing 1,300 feet from its peak. This view is from McClellan Overlook, off Curly Creek Road, in Gifford Pinchot National Forest.
Like a good omen, snow-covered Mount Hood greeted me as I turned south on State Route 35, the beginning of Mount Hood Scenic Byway, where I rode through apple farms on a sunny, cloudless July morning. The previous day topped out at 105 degrees, and the heat wave wasn’t done with me, but early in the morning the byway along the East Fork Hood River was still in deep shadow and my teeth began to chatter. On went the heated grips, and I tried to hold onto the physical memory ofbeing cold, hoping to recall that feeling during theheat of the day (it never works). With graceful curves and smooth pavement, the byway is a pleasure to ride, especially when the screen of trees falls away and Mount Hood takes center stage, framed perfectly in brilliant blue.
Mount Hood Scenic Byway, one of many scenic byways that meander through the Cascades, cuts a wide arc around its namesake peak.
After cutting a wide arc around the eastern and southern sides of Mount Hood, my first crossing of the Cascades came to an end in Sandy. Turning south and then east on State Routes 211 and 224, I picked up the West Cascades Scenic Byway, heading southeast along Estacada Lake and North Fork Reservoir, two finger lakes created by dams on lower sections of the Clackamas River. As the byway crosses into Mount Hood National Forest, it enters a deep, narrow valley as it climbs up into the Cascades, where the Clackamas flows wild and free. The Tracer and I were in a groove, experiencing this road together for the first time –bends, kinks, dips, rises, bridges, blind corners, and fleeting views of the river, the contours of which give the road its character.
A postcard view of Oregon’s Mount Hood from Bennet Pass Trailhead, just off State Route 35 on the Mount Hood Scenic Byway.
With the low-fuel light on, I pulled into Detroit, a crossroads on the shore of Detroit Lake. Folks were starting their summer weekend early. Subarus laden with kayaks and pickups overflowing with camping gear were parked in lots, coolers were being filled with ice and beer. I refueled and scarfed an egg salad sandwich in the shadow of Rivers Run Deli, trying to stay cool while enjoying a view of the marina and the lake’s milky blue water. When traveling solo and covering a lot of miles in just a few days, I rarely stop for long. Just a few minutes here and there, then I’m back in the saddle, trying to cram 10 pounds of riding into a 5-pound sack.
Roads in the Cascades often carve their way through lush forests, with the curving pavement winding in and out of shadows.
From Detroit to Chemult – south, zig west, zag east, back over the Cascades –all I remember are trees, and a cross-section of America. Stopping to use the bathroom at a McDonald’s, I had to negotiate my way through a crowd of boisterous kids wearing matching blue T-shirts bearing the name of their church summer camp, ready to fill their bellies with Happy Meals. Outside, two young women were sitting on the curb, holding a sign: Family in Need. And next door I topped off the Tracer’s tank after the flirtatious – not to mention bald and tattooed – gas station attendant handed me the nozzle. (In Oregon and New Jersey, you’re not allowed to pump your own gas, but attendants often let motorcyclists break the law.) I was just passing through, little more than an observer. Experiences like these give me something to mentally chew on while ticking off miles.
The 500-mile Volcanic Legacy Scenic Byway runs through Oregon and California, connecting volcanic peaks in the Cascades.
Passing through Chemult, a truck stop on U.S. Route 97 brought back memories of stopping there to refuel during my one and only SaddleSore 1000 ride back in 2013 – a very long day that I’m not likely to repeat. Turning west on State Route 138, the Volcanic Legacy Scenic Byway took me to Crater Lake National Park, where I queued up behind a rumbling Harley and a line of cars and RVs outside the northern gate, keeping my faceshield closed to prevent the army of mosquitos from waging war on my nose. Crater Lake was high on my list of must-see places, and it didn’t disappoint. Created thousands of years ago when a volcano collapsed, the caldera lake is nearly 2,000 feet deep – the deepest in the U.S. – and because it is filled only by rain and snow, the water is pure and a brilliant shade of blue. But I was pressed for time and there were construction delays on the East Rim Road, so I’ll have to go back to ride the full loop.
Taking in the brilliant blue of 2,000-foot-deep Crater Lake, a collapsed volcano filled with thousands of years’ worth of rain and snow.
On the not-politically-correct but wonderfully twisty Dead Indian Road, I descended from the green heaven of the Cascades into the dry, brown hell of Ashland. It’s actually a lovely little town, home to Southern Oregon University and the world-famous Oregon Shakespeare Festival, but it was over 100 degrees and I had been in the saddle for 12 hours. I was in desperate need of a cold shower, a colder beer, and some pizza.
The next day I left the Cascades, riding a few miles south on Interstate 5 into California, where I filled up at a Chevron in Hornbrook. On both sides of the interstate and all around the gas station, the ground and vegetation were charred black from the Klamathon Fire, which roared through just days earlier. It was one of many wildfires that would plague California and other western states in the weeks and months ahead.
More blanks filled in on my mental map: State Route 96 along the Klamath and Trinity rivers, which cuts through rugged, remote country. In 1941, a group of armed men stopped traffic near the town of Yreka, handing out a Proclamation of Independence for the State of Jefferson, which was in “patriotic rebellion against the States of California and Oregon.” Although the new state never materialized, the movement is still active, and the State of Jefferson Scenic Byway runs along Route 96 from State Route 263 to Happy Camp. After that, 96 becomes the Bigfoot Scenic Byway. Regardless of one’s views on state politics or mythical forest dwellers, the riding along Route 96 is sublime and traffic is almost nonexistent.
Sasquatch sighting in Happy Camp, California, on State Route 96, where the State of Jefferson Scenic Byway turns into the Bigfoot Scenic Byway.
At Willow Creek, I turned west onto State Route 299, known as the Trinity Heritage Scenic Byway because it follows the path of 19th-century gold miners and pioneers. It snakes its way through the heavily wooded Trinity Alps and climbs over a pass before making a long descent to the coast. Even in mid-July, U.S. Route 101 through Arcata, Eureka, and Fortuna was socked in with chilly fog. At Alton, I turned east again, heading inland on State Route 36 –not a designated scenic byway, but known as Serpent to the Sea. Traveling west-to-east, it passes through a few rural communities before entering Grizzly Creek Redwoods State Park, where enormous coast redwoods rise hundreds of feet above the roadside.
Beyond Bridgeville, Route 36 turns into a narrow goat path as it goes over a ridge, but it’s currently being straightened and widened to accommodate big trucks and RVs –an improvement for them but not for motorcyclists. East of Dinsmore, Route 36 was freshly paved, like having a racetrack all to myself, scraping the Tracer’s peg feelers in corner after corner. And on it goes, over more mountains with endless curves and finally roller-coastering its way through ranch land with blind crests and sudden drops and quick turns. As I approached the town of Red Bluff, just before Route 36 crosses I-5, I found the well-known sign that warns motorists and entices motorcyclists: curvy roads next 140 miles.
This sign tells motorcyclists everything they need to know. Good times ahead!
The thing about riding roads as good as these is that it becomes addictive. Now that I have experienced the Cascades and California Routes 96 and 36 for myself, all I want to do is go back for more.
New styling on the Tracer 9 GT includes full LED lighting and extended fairing lowers that provide additional weather protection for the rider’s legs. (Photos by Kevin Wing)
Some motorcycles are fantastic right out of the gate. Others take a little time to find their way. They’re diamonds in the rough, requiring an update or two to chip away the rough edges and realize their full potential. The 2021 Yamaha Tracer 9 GT is one such bike.
Eight years ago, I traveled to San Francisco for the press launch of the all-new Yamaha FZ-09. It was a naked sportbike with an exciting, brash engine, an 847cc inline-Triple with a crossplane crankshaft that imbued it with gobs of character and torque. And at just $7,990, it was a steal. But there were downsides, like fueling issues, mediocre suspension and brakes, and a rock-hard seat.
The Tracer 9 GT is a fully equipped sport-tourer. For 2021 and 2022 model years, it’s available in Redline (shown above) and Liquid Metal.
A year after the FZ-09 debuted, Yamaha released a sport-touring version called the FJ-09, which was equipped with an upper fairing, a windscreen, upgraded rider and passenger seats, revised suspension, and optional saddlebags. At $10,490, it was a bargain too, and certainly more practical than the FZ, but the FJ-09 still suffered from a herky-jerky throttle and suspension and brakes that fell well short of the engine’s capabilities.
Nonetheless, both the FZ-09 and FJ-09 sold well. The FZ-09 was updated for 2017, and its major shortcomings were addressed. When Yamaha decided to standardize model names globally, it became the MT-09, and for 2021 it was updated again with a larger 890cc Triple, a revised chassis, and new electronics.
The FJ-09 got its first major update for 2019, and it was offered in two variants, also with new names: the standard Tracer 900 and the premium, touring-ready Tracer 900 GT. Both models featured new styling, smoother throttle response, a longer swingarm for more stability, and a larger, one-hand-adjustable windscreen. The GT also had upgraded suspension, a TFT color display, cruise control, heated grips, and a quickshifter. All that goodness ratcheted up the price to $12,999 for the GT, but it was still a good value.
Larger 890cc Triple makes more power.
We quickly grew fond of the Tracer 900 GT, which was agile, responsive, and well-suited for solo touring. Following the press launch, I spent a few days exploring backroads in Oregon and California. After I put nearly 2,000 miles on the bike, former Managing Editor Jenny Smith installed Yamaha’s accessory comfort seat and touring windscreen. Then she embarked on a 7-day, 5,000-mile endurance test that included the Three Flags Classic, a rally with stops in Mexico, Canada, and the U.S. We were reluctant to give back the keys.
Like an adventure bike, the Tracer 9 GT has an upright seating position with generous legroom.
But 2021 is when the Tracer 9 GT has come of age. With a new name and now offered only in the GT version, it’s more capable, more comfortable, and more fully featured. It got the larger 890cc Triple from the MT-09, which is more powerful, more fuel efficient, and saves nearly 4 pounds of weight. On Jett Tuning’s dyno, the Tracer 9 GT made 108 horsepower at10,000 rpm and 63 lb-ft of torque at 7,200 rpm at the rear wheel. That’s a gain of 5 horsepower and 6 lb-ft of torque over the Tracer 900 GT we tested last year. During this test, we averaged 48.7 mpg, up from 44 mpg on the Tracer 900 GT. Fuel capacity increased slightly to 5 gallons on the Tracer 9 GT, and our estimated range was 243 miles, up from 211 miles on the previous model.
One-hand-adjustable windscreen and larger handguards provide good wind protection, and heated grips are standard.
Although throttle response issues were resolved during the previous update, the Tracer 9 gets the latest version of Yamaha’s Y-CCT (Yamaha Chip Controlled Throttle) throttle-by-wire, which uses an APSG (Accelerator Position Sensor Grip) for a more refined feel. A 15% increase in crankshaft inertia further smooths out on/off throttle transitions. On the road, there is a direct connection between the right grip and the rear wheel without any harshness.
Both the windscreen and seat are adjustable for height, and the handlebar and footpegs are adjustable for reach.
Yamaha’s D-Mode, which adjusts power and throttle response, now has four preset modes: 1, 2, and 3 offer full power with progressively milder response, while 4 reduces power and has the softest response. Mode 1 corresponds to what would be called “sport” mode on many motorcycles, which is often overly abrupt, but not so on the Tracer 9 GT. Throttle response is immediate without being too aggressive. As the dyno chart shows, torque is consistent through the rev range, so there’s always grunt available when you need it.
The Tracer has always been an agile bike, but the upgraded suspension and lighter wheels make it even better.
Wrapped around the engine is a new aluminum frame made using a controlled-fill diecast process that reduces mass and increases lateral rigidity by 50%. A 1.2-inch lower headstock and mounting the engine more vertically helps centralize mass. A new aluminum swingarm is mounted within the frame for more rigidity, and a new steel subframe increases load capacity and allows an accessory top trunk to be mounted along with the larger 30-liter saddlebags.
Larger saddlebags will hold a full-face helmet in each side, and they can be left unlocked for easy access.
The saddlebags are large enough to hold a full-face helmet in each side. The bags can be left unlocked for convenient access, locked for security, or removed to carry into a hotel room or to lighten the load for apex strafing. The lock barrels can be a little fiddly (which has long been an issue with Yamaha luggage), but with practice they work just fine.
New KYB semi-active suspension electronically adjusts damping based on real-time conditions.
Another upgrade for the Tracer 9 GT is semi-active suspension. The KYB Actimatic Damping System (KADS) uses input from a 6-axis IMU, the ECU, a hydraulic control unit, a stroke sensor on the fork, and an angular position sensor on the rear shock to adjust damping based on real-time conditions. The system electronically adjusts compression and rebound damping in the fork and rebound damping in the rear shock, and there are two modes, A-1 (sport) and A-2 (comfort). Spring preload must be adjusted manually using a tool for the fork (it’s in the toolkit) and a remote knob for the shock.
The Tracer 9 GT is ideally suited for solo sport-touring, but it has a comfortable passenger seat and can be fitted with an accessory top trunk.
With 5.1/5.3 inches of front/rear suspension travel, the Tracer 9 GT has plenty of available stroke to absorb bumps, seams, potholes, and other pavement irregularities. By adapting to changing conditions, the KADS suspension delivers a supple, compliant ride and it quickly firms up as needed to prevent excessive chassis pitch under braking and acceleration. The Tracer 9 GT feels more sure-footed in corners than its predecessor, with excellent grip from its Bridgestone Battlax T32 GT sport-touring tires. Agility has gotten a boost from new 10-spoke aluminum wheels made using Yamaha’s new “spinforging” process, which saves 1.5 pounds of unsprung weight.
Full LED lighting includes headlights, position lights, and cornering lights.
In addition to its new semi-active suspension, the Tracer 9 GT has a more comprehensive suite of IMU-based electronic rider aids derived from the YZF-R1 sportbike, including traction control, slide control, lift control, and ABS, with intervention adapted to lean angle and other inputs. The electronics have multiple modes, and the only system that can’t be turned off is ABS. The IMU also provides input for new LED cornering lights, which illuminate the insides of cornering when lean angle exceeds 7 degrees.
The Tracer 9 GT has an upright seating position, more like an adventure bike than the more committed ergonomics on many sport-tourers. Being able to sit up straight with no weight on the rider’s wrists, relaxed shoulders, and ample legroom makes it enjoyable to pile on the miles, and that’s what a sport-tourer is all about. The one-hand-adjustable windscreen and handguards provide good wind protection too.
A new dual TFT display provides a wealth of info, and what is shown in the grid on the right side is customizable.
Comfort and convenience features include cruise control, heated grips, and a quickshifter. In addition to upshifts, the quickshifter now provides clutchless downshifts with an auto-blipper. And the heated grips now offer 10 levels of adjustment. The Tracer also has full LED lighting, a 12-volt outlet behind the instrument panel, and a centerstand.
Yamaha has given the Tracer a unique dual-panel TFT display, with each screen measuring 3.5 inches. The speedometer, tachometer, gear indicator, and other functions are on the left panel. The right panel has a grid of four smaller displays that can be customized to show the rider’s preferred info, even if the information is also shown on the left panel. The mostly white-on-black text is crisp and clear, but some of the text is small. The TFT panels have a glossy surface that reflects sunlight and can make the screens appear too dim (brightness is not adjustable). Depending on the position of the sun, sometimes all I could see was the reflection of my riding jacket.
The Tracer is equipped with a centerstand for easier chain maintenance and loading/unloading the saddlebags.
Yamaha upgraded the rider’s seat with higher-quality cover material and added color-matched stitching. The dual-height rider’s seat can be set at 31.9 or 32.5 inches. To suit riders of different body types or preferences, the bars and footpegs can be adjusted. Rotating the bar-riser clamps allows the handlebar to be moved up 4mm and forward 9mm, and the footpeg brackets can be moved up 14mm and back 4mm. The passenger seat is now thicker and wider, and there’s a new integrated, one-piece grab handle.
The Tracer 9 GT’s many upgrades have raised the price to $14,899, which is $1,900 more than last year’s Tracer 900 GT. For those who are cross-shopping, BMW’s F 900 XR (with Select and Premium Packages but no saddlebags) is $15,045 and Kawasaki’s Versys 1000 SE LT+ costs $18,199. Even though the Tracer is more expensive than its predecessor, it’s priced lower than its closest competitors and no important features were left off the spec sheet.
New “spinforged” wheels save 1.5 pounds of unsprung weight. They also have larger-diameter axles and are fitted with Bridgestone Battlax T32 GT sport-touring tires.
Over the past several years we’ve put thousands and thousands of miles on the FJ-09, the Tracer 900 GT, and now the Tracer 9 GT. We were immediately won over by its exciting Triple and its playful maneuverability. Yamaha kept at it with a steady regimen of improvements and refinement, and the platform got better and better.
This year Yamaha hit the bullseye, and the Tracer 9 GT earned Rider‘s 2021 Motorcycle of the Year award. We’re more reluctant than ever to give the keys back.
The Tracer’s new saddlebags feature a floating stay damper system to absorb mass transfer during cornering to keep the chassis stable.
Yamaha Europe has just partnered with Crescent Racing to reveal a Special Edition WorldSBK R1 replica – and the extremely exclusive batch of 21 units are all set for the lucky garage of whoever gets there first.
The report from VisorDown states that the bikes are all signed by (and created in commemoration of) Toprak Razgatlıoğlu, winner of the 2021 WorldSBK Championship for Yamaha.
If you’re thinking of getting your hands on one of these beauties, expect to place down a deposit of £500.00 – a reasonable sum, made the better by the following list of perks you’ll be getting with the bike itself:
A badge proving the ‘technician-signed build identification’ of your unit
A framed ‘limited edition certificate’, autographed by Razgatlıoğlu himself as well as the Team Principal Paul Denning – including the edition number alongside the usual VIN number and buyer details.
Two VIP hospitality passes to your choice of 2022 WorldSBK events, where you will be “a VIP guest of the team with pit-box visit and the opportunity to spend time with Razgatlıoğlu,” according to the report.
A superbike set up to your personal specifications, with an entire day devoted to one-on-one training with either Crescent Yamaha’s James Hillier OR Niall Mackenzie (“UK circuit only; overseas set up and training by arrangement”)
An autographed article of riding equipment that Razgatlıoğlu used when he won the 2021 WorldSBK Championship.
Be sure to visit the official website of Crescent Racing to toy with that measly £500.00…if we’re talking bang-for-buck, it’s worth it.
Offered in the U.S. for the first time, the up-spec 2022 Yamaha MT-10 SP receives the same updates as the MT-10 but also features Öhlins semi-active suspension, a color-matched lower fairing, and braided steel brake lines. It comes in YZF-R1M-inspired Liquid Metal/Raven.
Yamaha’s “Hyper Naked” lineup includes six MT models, with MT standing for “Master of Torque.” The range starts with the entry-level MT-03 and works its way up to the MT-07, MT-09, MT-09 SP, MT-10, and MT-10 SP. All have been updated recently, and the 2022 Yamaha MT-10 and MT-10 SP, the latter being offered in the U.S. for the first time, are the latest to get upgraded.
2022 Yamaha MT-10
2022 Yamaha MT-10 in Cyan Storm
Our last test of the MT-10 was in 2017 (when it was known as the FZ-10), and it proved to be an exciting, versatile sit-up sportbike, even performing well as a sport-tourer when accessorized with a taller windscreen, a comfort seat, and luggage.
For 2022, the MT-10 gets a more stripped-down look, with unnecessary bodywork removed. Enlarged intake ducts mounted on either side of the fuel tank cover increase efficiency while enhancing the bike’s aggressive stance. New twin-eye mono-focus LED headlights and LED position lights above the headlights combine with a more compact nose assembly to minimize overhang. Separate high and low beam units are said to project a powerful, even beam with softer light at the edges.
Yamaha has also improved the MT-10’s ergonomics with a reshaped fuel tank, a revised rider triangle that enhances the feeling of sitting “in” the bike, and a more comfortable seat.
Also new is a 6-axis IMU and a full suite of electronic rider aids originally developed for the YZF-R1. The system includes lean-sensitive traction control, slide control, lift (wheelie) control, engine brake management, and ABS, all with multiple levels or modes. Each can be adjusted independently, or the Yamaha Ride Control system provides four ride modes with presets for each one. The MT-10 is also equipped with an up/down quickshifter.
Yamaha has refined the MT-10’s liquid-cooled, 998cc CP4 inline-Four with new fuel injection settings and revised intake and exhaust systems that are said to deliver a more torquey, street-focused engine character. A new airbox with three differing-length intake ducts tuned to resonate harmoniously at varying engine speeds creates a unique intake roar that enhances the overall riding experience. Sound is heightened further by new Acoustic Amplifier Grilles positioned on the front left and right of the fuel tank, transmitting the tuned induction sound directly to the rider.
Like the YZF-R1, the new MT-10 features a throttle-by-wire system with the Accelerator Position Sensor Grip (APSG), which uses a spring, slider, and gear mechanism to produce varying degrees of resistance to recreate a natural throttle feel during use. The rider can also change throttle response characteristics by adjusting the PWR (Power delivery mode) between four different power modes.
Originally developed to cope with the demands of high-horsepower superbikes under race conditions, the MT-10’s aluminum Deltabox frame uses the engine as a stressed member to minimize weight. Equipped with a long aluminum swingarm while still maintaining a compact 55.3-inch wheelbase, the chassis is designed to deliver agile yet stable handling in a wide variety of low- and high-speed riding conditions.
2022 Yamaha MT-10 in Matte Raven Black
Fully adjustable KYB suspension can be tailored to rider preferences. The triple-disc brakes, with dual 320mm floating discs with 4-piston radial calipers in front and a single 220mm disc with a 2-piston caliper out back, get upgraded for 2022 with the addition of a Brembo radial brake master cylinder. Also new is a 4.2-inch color TFT display.
The 2022 Yamaha MT-10 will be offered in two color options: Cyan Storm or Matte Raven Black. It will be available from dealers in March 2022 for an MSRP of $13,999.
2022 Yamaha MT-10 SP
Joining the MT-10 for 2022 is the up-spec MT-10 SP, which replaces the manually adjustable KYB suspension with Öhlins semi-active suspension and is offered in a YZF-R1M-inspired colorway with premium styling accents.
The new MT-10 SP is the first production motorcycle to be fitted with the Öhlins’ next-generation electronically controlled suspension employing the latest spool valve damping. This state-of-the-art technology provides an even greater range of damping adjustments and a higher degree of response.
Riders can choose between three semi-active damping modes (A-1 [Sport], A-2 [Intermediate], A-3 [Tour]), as well as three manual settings (M-1, M-2, M-3). When any of the automatic modes are selected the system adjusts rebound and compression damping continuously to match the current running conditions, ensuring the most appropriate settings are always in play.
Manual mode allows precise electronic adjustment of compression and rebound damping for both the front fork and rear shock. Managed through the YRC menu, the suspension can be tailored to suit the riding style or environment.
The MT-10 SP is also equipped with an exclusive color-matched lower fairing for a more aggressive race-bred look, while also directing more air to the oil cooler at speed. It’s also equipped with braided steel brake lines, providing a high level of feel at the lever and more resistance to fade.
The 2022 Yamaha MT-10 SP is available in Liquid Metal/Raven. It will be available from dealers in May 2022 for an MSRP of $16,899.
For more information or to find a Yamaha dealer near you, visit yamahamotorsports.com.
The middle-weight adventure bike segment is arguably one of the most populated and thus exciting ones at the moment. The Yamaha Tenere 700 has grown to be one of the best options in the segment, showing the world what a hardcore twin-cylinder adventure bike is truly capable of. Now, Yamaha has gone and made it even sweeter by announcing the arrival of a higher-spec, more capable iteration — the 2022 Yamaha Ténéré 700 Raid Prototype.
One of the few complaints with the standard Ténéré 700 was that its suspension was a little too soft for more demanding off-road use. Yamaha has been listening to its customers and has addressed this with the new model. The Yamaha Ténéré 700 Raid digs deep into the GYTR (Genuine Yamaha Technology Racing) parts bin and features a host of components from Yamaha’s rally bikes.
ADV Pulse reports that the Raid uses “larger 48mm forks with 10.6 inches of suspension travel and mounts them with CNC Machined aluminum triple clamps for extra rigidity. The rear shock has also been upgraded with 10.2 inches of suspension travel and also gets a revised suspension linkage.”
It’s also worth mentioning that the bike has been developed with input from off-road riders Alessandro Botturi and Pol Tarrés. If these names don’t sound familiar, you should definitely check out the ‘Seeker’ series on YouTube; what Pol Tarrés can do with the Ténéré is phenomenal.
There are also some performance updates on the Raid. A new airbox and filter, along with the addition of an oil cooler for the radiator, should improve performance. Then there’s a custom ECU and full titanium Akrapovic exhaust that provide a bump in power. Other changes include better protection for aggressive off-road riding and better braking hardware.
Considering that the Dakar rally is still restricted to the 450cc class, we won’t be seeing the Rallye spec iteration participating in the world’s most challenging race anytime soon. However, there are still numerous other competitors that the Yamaha Ténéré 700 Raid can join in, and it looks like an excellent motorcycle for us common folk as well.
There’s no word on when the Ténéré 700 Raid will go into production or if the GYTR catalog will be available to existing owners of the standard bike. We’ll post an update when Yamaha releases more information.
Bringing you the Best Motorcycle News from Around the Web!
We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.Ok
