The 2020 KTM 890 Duke R will be available in dealerships this spring.
We needed some good news, and KTM North America has delivered, announcing the early availability of the brand new 890 Duke R, unveiled in Milan last November and originally intended to launch in late 2020 as a MY2021 machine. Instead, KTM will be bringing in a “very limited number” of 890 Duke R models this spring as 2020 models.
Basically a more powerful and aggressive version of the impressive-in-its-own-right 790 Duke, the 2020 890 Duke R features a new 890cc parallel twin with an increased bore and stroke, higher compression ratio and redline, larger valves, a new piston design with new connecting rods and a new crankshaft, new individual mapping adjustment on each cylinder, a knock sensor and new engine cases. The new mill churns out more horsepower and torque, and KTM also says it provides better rideability due to increased rotating mass.
Brakes are by Brembo, with larger discs and Bosch ABS that includes a Supermoto setting, suspension is fully-adjustable WP Apex front and rear, and electronic rider aids include new-generation traction control and ride modes with optional Track mode and Quickshifter+, all aided by a new 6D lean angle sensor.
Befitting its “super scalpel” mission, the 890 Duke R has a lower, flatter handlebar and footpegs that are higher and more rear-set for a sportier riding position and greater lean angle. It makes no pretensions at being anything other than a twisty-munching or track-attacking machine, with a solo seat and no pillion footpegs. It’s you and Mr. Duke, that’s it.
Pricing has yet to be announced, but barring any supply chain disruptions we should see the bike in dealerships sometime this spring.
BMW has upgraded its middleweight parallel twin-cylinder line with a larger version of the engine from the F 850 GS, which brings more character and smoothness to the new F 900 R (shown) and F 900 XR.
Since the launch of the BMW F 800 model family with the F 800 S and F 800 ST in 2006, these middleweight, parallel twin-powered motorcycles have been offered in a wide variety of models as lower-priced alternatives to BMW’s larger bikes. As with the R 1200 boxer twins, the most popular parallel twins have been the F 800 GS and GSA adventure bikes, with the more street-oriented F 650 GS/F 700 GS close behind. No surprise, really, since adventure and ADV-styled bikes have done well for some time now.
Conversely the F 800 ST and later GT sport-touring versions were short-lived, leaving the F 800 R streetfighter introduced in 2009 as the sole non-GS model in the lineup as of 2019. No doubt the bike’s entry-level price and the showmanship of four-time world-champion freestyle rider Christian Pfeiffer — who helped develop the naked bike he spun, slid and nose wheelied to victory — extended the F 800 R’s longevity.
The BMW-designed, DOHC, 4-valve-per-cylinder twin is made by Loncin in China, and bikes are assembled in Berlin, Germany. In addition to an unbalanced 270/450-degree firing order for a better sound and feel, it has new dual counterbalancers ffor smoothness.
We applauded BMW’s move toward a simpler, less expensive entry-level twin with the F 800s, which had telescopic forks in place of pricier Telelever or Duolever front ends and belt or chain final drive versus a shaft. But their BMW-designed, Austrian Rotax-built engine, even with its innovative counterbalancer, never really earned our admiration. It was buzzy and raspy sounding and just didn’t deliver the satisfying, torquey throb we expect from a twin.
The F 800s performed well, but it wasn’t until BMW redesigned the engine for the 2019 F 850 GS and F 750 GS (and engine production moved to Loncin in China) that the 853cc engine they share finally came to life. The larger displacement helped, but it was mostly the switch from a balanced 360-degree firing interval with 0-degree crankpin offset to an imbalanced 270/450-degree interval and 90-degree offset that woke the powerplant up, giving it an almost boxer-like twin-cylinder growl and feel. Swapping the central connecting rod-style balancer for dual balancer shafts also tamed the vibes.
Fast-forward one year and the new parallel twin has been enlarged once again and slapped into a pair of dynamic new middleweights, the F 900 R and F 900 XR, roadster and sport-adventure bikes again priced as alternatives to BMW’s larger machines. Updates to the shared DOHC, 4-valve per cylinder engine for more performance and torque from F 850 status include a bump to 895cc, a new cylinder head, forged pistons instead of cast and a higher 13.1:1 compression ratio.
On the Jett Tuning dyno our F 900 R test bike churned out 88.2 horsepower at 8,400 rpm and 58.1 lb-ft of torque at 6,400 rpm, an improvement of about 3 horsepower and 3 lb-ft of torque over our 2019 F 850 GS test bike. Compared curve to curve, more torque is available across more of the F 900’s powerband, too, especially between 4,000-7,000 rpm (redline is at 9,300). All of this grunt reaches the rear wheel via chain final drive through a slick-shifting 6-speed gearbox with a cable-actuated slipper clutch that has a light pull and broad engagement band (an up/down quickshifter is available as an option).
Our F 900 test bike made about 3 more horsepower and 3 more lb-ft of torque at the rear wheel than the F 850 GS.
In addition to their engines, both bikes share an aluminum bridge-type frame, aluminum double-sided cast swingarm and bolt-on steel subframe (presumably to provide enough strength for the optional soft side cases and a luggage rack/top trunk). There’s a 43mm USD fork with no adjustments up front, and a single shock with rebound damping and spring preload adjustment in back — I do wish the remote knob for the latter was easier to access.
Single rear shock on both bikes has adjustable rebound damping and spring preload, the latter with a remote knob that is hard to use.
Cast wheels are shod with high-performance sport- or sport-touring tires in the same sizes, and both shed velocity with triple disc brakes that include radial-mount opposed 4-piston calipers up front and ABS. LED headlights and taillights are standard, and front and center is a large, bright 6.5-inch TFT display with a wealth of ride and vehicle information accessible via the Multi-Controller wheel and menu button on the left bar.
Bright 6.5-inch TFT display offers a ton of vehicle and ride info, all controlled with the Multi-Wheel Controller and a menu button the left bar.
In typical BMW fashion, though the whole idea of the F 900s is a ton of fun at a lower cost, you can boost their prices considerably with a slew of nifty accessories like multiple seat options, Keyless Ride, heated grips, cruise control, a centerstand and more, as well as advanced optional electronic enhancements. These include Dynamic Electronic Suspension Adjustment (D-ESA) with Dynamic and softer Road modes and electronic preload; Ride Modes Pro, which adds Dynamic and Dynamic Pro modes to the standard Rain and Road engine modes, and enables cornering ABS, MSR and Dynamic Brake Control (DBC), which detects emergency braking and reduces torque output to counter unintentional opening of the throttle. The Ride Modes Pro plug-in dongle also upgrades the standard traction control to Dynamic, and of course all of this stuff is infinitely adjustable six ways from Sunday.
Decent wind protection (especially with the larger accessory windscreen we tried later) contributes to the XR’s sport-touring competence.
Fortunately both bikes work just fine without spending a moment playing with settings or one might never leave the garage. The F 900 R is the sportier of the two, with a light wet weight of 471 pounds, shorter suspension travel and steering geometry that make it quite a ripper in the corners. It also has a lower seat, higher footpegs and flatter bar for sport riding and to help it accommodate shorter riders, yet the seating position is still quite comfortable, and while the suspension is set firm for sport riding it still soaks up the bumps quite well. Overall it should appeal to a broad range of riders looking for great handling and some techy stuff at a lower price.
To justify its higher cost, the F 900 XR adds a substantial fairing and small adjustable windscreen that together provides a fair amount of wind protection (I do recommend the optional taller windscreen) and contributes to its higher wet weight of 486 pounds. It also has a taller handlebar, significantly more suspension travel, lower pegs and slightly higher seat in keeping with its adventure-influenced design, yet I could still support it adequately at stops with my 29-inch inseam. Add a pair of side cases and it would make a very nice light tourer with a good balance of handling and power.
The F 900 R has shorter suspension travel, a lower seat, flatter bar and higher pegs to give it a sportier feel and stance.
Although the light, plastic-welded fuel tanks on the R and XR have capacities of just 3.4 and 4.1 gallons respectively, I never saw fuel economy below 37 mpg from the required 91 octane, and that was after nearly 250 miles with a heavy throttle hand — they are capable of much better. Although the BMW R 1200 boxer engine makes more power and torque, in many ways the F 900 parallel twin’s character is equally satisfying, especially its growl and ripping-velvet feel that comes with a smooth rushing surge of torque in the midrange. Paired with either the R roadster or XR sport-adventure platforms, the combination creates a very fun and functional middleweight for whatever sort of ride you care to enjoy.
A nicely styled fairing and small adjustable windscreen, more suspension travel and upright seating are hallmarks of the F 900 XR.
2020 BMW F 800 R/XR Specs
Base Price: $8,995/$11,695 Warranty: 3 yrs., 36,000 miles Website:bmwmotorcycles.com
Engine
Type: Liquid-cooled, transverse parallel twin Displacement: 895cc Bore x Stroke: 86.0 x 77.0mm Compression Ratio: 13.1:1 Valve Train: DOHC, 4 valves per cyl. Valve Adj. Interval: 12,000 miles Fuel Delivery: BMS-M EFI Lubrication System: Dry sump, 3.2-qt. cap. Transmission: 6-spd, cable-actuated wet slipper clutch Final Drive: O-ring chain
Accessible, inexpensive, cool looking and, of course, fun, the littlest member of Yamaha’s MT lineup of “hyper naked” sport bikes has a lot going for it. Photos by Joseph Agustin.
“Though she be but little, she be fierce!” — William Shakespeare
Consider for a moment that the best-selling Yamaha motorcycles for the past several years — across all categories — are the 321cc YZF-R3 sport bike and the 689cc MT-07 “hyper naked” sport standard, and you can understand why Yamaha is launching the newest (and smallest) member of the MT family with hopes for an army of future Yama-loyalists pinned to the MT-03’s pointy nose. The 2020 MT-03, essentially a YZF-R3 given the streetfighter treatment — no fairings, a flat handlebar and slightly revised front suspension — is an unapologetic gateway drug to the larger MT-07, MT-09 and beyond, a bike that will draw young, female and/or first-time buyers into dealerships, attracted to its aggressive styling, accessible size and $4,599 price tag.
At night, the MT-03’s LED turn signal/marker lights, headlight and position markers look like nothing else on the road.
Unlike some other naked sport bikes, there’s nothing dumbed-down about the MT-03. Its 321cc offset parallel-twin, DOHC engine with 180-degree crank and single counterbalance shaft, 6-speed gearbox, steel frame and swingarm, cast aluminum wheels, LCD display and single-disc front and rear brakes are all identical to the R3 (read the review here). Even its throttle mapping and gear ratios, with 5th and 6th both functioning as overdrives for comfortable freeway cruising, are unchanged. Apart from the flatter handlebar vs. the R3’s clip-ons and the lack of fairings, the biggest change to the MT-03 is its revised front suspension. Inside the 37mm inverted KYB fork is a slightly longer, softer spring with 6mm more preload and reduced compression damping (rebound is unchanged) that better suits the MT’s more upright riding position. The rear KYB shock is identical to the R3’s, with 7-step preload adjustment. Seat height remains a low 30.7 inches and wet weight is a claimed 373 pounds (our R3 tester weighed in at 379 pounds). Unlike the R3, all 2020 MT-03s have ABS as standard, making it $700 less expensive than the ABS-equipped YZF-R3.
Many MT-03s will see urban action, where their upright riding position and light weight make them easy to handle, maneuver and park.
Our first ride on the littlest MT took place at the press launch in Austin, Texas, which — despite the cancellation of the SXSW tech conference scheduled to take place concurrent to our event — was still choked with local commuter traffic as we made our way out of the city in search of curvy delights in the nearby Hill Country. The MT-03 lacks a slip and/or assist clutch, but lever pull is still fairly easy (though neither the clutch nor brake levers are adjustable) and the low first gear makes starting out a cinch. Around town the parallel twin, which generated 35 peak horsepower at 10,600 rpm and 19 lb-ft of torque at 9,200 when we last tested it in 2017, is pretty tame and drama-free, but those Jett Tuning dyno figures hint at the rest of the story: when the roads open up, spinning the little MT’s mill past 6,000 rpm rewards the rider with a noticeable boost. This equates to a need to maintain higher rpm through twisty, technical terrain, otherwise even a generous handful of throttle is only just enough to pull you out of the corner.
A compact wheelbase, low 30.7-inch seat and narrow waist make the MT-03 feel nimble and confidence inspiring.
The upshot of course is that the MT-03 is extremely forgiving, ideal for first-time riders. It also reduces the risk of overcooking it into a turn, where I found the 289mm/2-piston front disc and 220mm/1-piston rear disc brakes to be a bit on the vague side, requiring a solid pull on the lever and offering little feedback. This may have been by design, again aimed at a newer rider’s potential tendency to panic and squeeze/stomp a bit too hard; Yamaha says the MT-03’s brakes were tuned to feel “controllable,” but as an experienced rider I wished for a more aggressive bite. A pair of aftermarket sintered pads would likely solve the problem.
ABS comes standard on all 2020 MT-03 models. Two-piston front brake requires a solid pull on the lever, with little feedback; upgrading to sintered pads might
be recommended as riders gain experience and confidence.
Other than the brakes, I found little else to complain about as we transitioned from city to twisties and back to the city, now in the throes of the evening rush hour. Despite a low seat that folded my 34-inch-inseam legs into a sporty bend, I never felt cramped, although there were some grumbles from other, taller testers (I am 5 feet, 9 inches). The flat handlebar, which is some 1 ½ inches higher and ¾-inch farther back than the R3’s clip-ons, created a comfortable riding position, though the deeply-dished seat kept me feeling somewhat locked in place. And the slightly softer fork suited my size and riding style quite well, compliant enough to not jar my fillings loose over bumps but stiff enough to hold up to aggressive cornering.
Of course, for an entry-price-point machine like the MT-03, specs and performance are often not the primary focus for potential buyers — it’s important the bike looks the part, and the MT-03 delivers. Unlike its R3 cousin, the MT gets full LED lighting, including newly sleek turn signals and a futuristic-looking headlight with slanted position markers. When lit, the effect is something like an angry robotic Cyclops. Perhaps not everyone’s cup of tea, but I actually think it’s pretty cool. Whether in sinister Midnight Black or eye-catching Ice Fluo, the 2020 MT-03 is a shining example of how far today’s “entry level” bikes have come, proving once again that even little bikes can be big fun.
2020 Yamaha MT-03 in Midnight Black and Ice Fluo.
2020 Yamaha MT-03
Base Price: $4,599 Website:yamahamotorsports.com Engine Type: Liquid-cooled, transverse parallel twin, DOHC, 4 valves per cyl. Displacement: 321cc Bore x Stroke: 68.0mm x 44.1mm Transmission: 6-speed, cable-actuated wet clutch Final Drive: O-ring chain Wheelbase: 54.3 in. Rake/Trail: 25 degrees/3.74 in. Seat Height: 30.7 in. Claimed Wet Weight: 373 lbs. Fuel Capacity: 3.7 gals., last 0.8 gal. warning light on MPG: 86 AKI min, NA
Ultra powerful, ultra light and ultra exclusive. Say hello to the 2020 Ducati Superleggera V4.
Last fall Ducati announced updates to its Panigale V4 and Panigale V4 S superbikes, including a new aerodynamics package and revised electronics, suspension and throttle-by-wire mapping. The 214-horsepower Panigale V4 weighs 436 pounds and the V4 S weighs 430 pounds (claimed figures)—that’s roughly 0.5 horsepower per pound for both models.
Ducati has now unveiled the Superleggera V4, which is Italian for “super light.” With a full racing kit and exhaust, it makes 234 horsepower and weighs a feathery 335.5 pounds, which is 0.7 horsepower per pound—a 40% higher power-to-weight ratio.
The frame, subframe, swingarm and wheels on the 2020 Ducati Superleggera V4 are made of light, strong carbon fiber. Bodywork is carbon fiber too.
How did Ducati shave 100 pounds off the already-svelte Panigale V4? The Bologna-based company says the “Superleggera V4 is the world’s only street-legal motorcycle with the entire load-bearing structure of the chassis (frame, subframe, swingarm and wheels) made from composite material [carbon fiber], achieving a 6.7 kg [14.8 lb] reduction in weight.” Many other components, such as the bodywork and aerodynamic wings (which produce 110 pounds of downforce at 168 mph), are also made of carbon fiber, while others are made of titanium, magnesium or aluminum.
The Superleggera’s “biplane” winglets produce produce 110 pounds of downforce at 168 mph.
The Superleggera is powered by a 998cc V4 – the Desmosedici Stradale R also found in the Panigale V4 R – rather than the 1,103cc V4 in the Panigale V4 and V4 S, saving another 6.2 pounds. The smaller, lighter engine makes more power – 224 horsepower vs 214 in the standard configuration. The race kit and exhaust further reduce weight while boosting claimed horsepower to 234.
Of course, the Superleggera V4 is equipped with the very
best in electronics and components, including Öhlins suspension (with a
titanium shock spring) and Brembo Stylema R front calipers.
Exotic materials, top-shelf components and the highest power-to-weight ratio of any street-legal motorcycle to roll out of a major manufacturer’s factory.
Only 500 Superleggera V4s will be produced, each
individually numbered and including a certificate of authenticity. The bike ID number
(XXX/500), which matches the VIN, is displayed on the frame, fork yoke and
ignition key.
The start of deliveries is planned for June 2020, and five bikes
will be produced per day. Superleggera buyers will also have a chance to
purchase an exclusive Superleggera V4 premium Dainese leather suit with
integrated airbag and an Arai carbon fiber helmet, both emblazoned with the
bike’s colors and graphics.
Such a premium motorcycle will include a premium “SBK Experience,” allowing owners to ride the Panigale V4 R, which competes in the SBK World Championship, on a test track at Mugello. Thirty lucky Superleggera V4 owners will have an exclusive opportunity to enjoy the “MotoGP Experience,” where they will be able to ride a Desmosedici GP20 on a race track.
Ducati has not released pricing, but the 2017 Ducati 1299
Superleggera went for a cool $80,000 and was also limited to 500 units—every
one of which was sold in short order. If you have the interest and the means,
make haste to your nearest Ducati dealer.
The 2020 Kawasaki Ninja 650 has finally come into its own, with a light restyle and TFT display capping off needed improvements introduced back in 2017. Photos by Kevin Wing.
What a difference a few years make. When we pitted the Ninja 650 against two rivals back in November 2016, we came away unimpressed — Kawasaki’s street-oriented sportbike felt overweight and uninspiring compared to its lithe sparring partners. But then Team Green put the Ninja on a diet and training regimen for 2017, shedding 43 pounds thanks to a new steel trellis frame, hollow-press aluminum swingarm, wheel assemblies and engine changes. The offset lay-down shock was replaced with a Ninja ZX-10R-derived horizontal back-link shock, and the new package was wrapped in sharper, sportier bodywork.
In addition to the significant weight loss, the Ninja’s 2017 training regimen included improvements to its engine, brakes and ergonomics. The liquid-cooled, DOHC, 4-valve-per-cylinder, 649cc parallel twin was retuned for better performance in the low- to midrange, where most street riders spend the majority of their time, and it got new injectors for more precise fueling, a mechanical gear position indicator, a revised airbox, a redesigned exhaust and smaller throttle bodies. A new 2-piston Nissin front brake caliper provided noticeably better performance and feel, and optional Bosch 9.1M ABS was said to be lighter and more responsive. (Read the complete details in our First Ride Review of the 2017 Ninja 650 here.) Suddenly this was a fighter to be reckoned with.
Included in the restyle are twin LED headlights that proved to be extremely bright for both daytime visibility and nighttime usefulness. Wide mirrors offer a good view of more than just the rider’s elbows. Photo by Kevin Wing.
For 2020, the Ninja 650 seems to have reached a milestone in its development, with refined styling that brings it inline with its ZX-6R and ZX-10R siblings, a new 4.3-inch full-color TFT display with switchable background color and ambient light sensor, connectivity to Kawasaki’s Rideology app and the latest Dunlop Sportmax Roadsport 2 tires. Specs and features only tell half the story of course; like a martial artist, mastering the movements is one thing — putting them to use is another. Since it was Senior Editor Drevenstedt who rode the revamped 2017 model, I haven’t been on a Ninja 650 since the 2016 comparo, and after spending five hundred or so miles on this newest version it’s clear this is a much improved motorcycle.
New for 2020 is a 4.3-inch TFT display, with an easy-to-read design and ambient light sensor that automatically adjusts brightness. It also allows the rider to connect the Ninja to their smartphone via Bluetooth and Kawasaki’s Rideology app. Photo by Kevin Wing.The display has two different background color options; I found the black background to be the easiest to read, even in direct sunlight. Photo by Kevin Wing.
Overall performance figures haven’t changed that much — peak horsepower is slightly down, mid-range power and torque are slightly up and peak torque is about the same — but with 43 fewer pounds to lug around, the 2020 Ninja 650 is now responsive, quick on its feet and quite fun to ride, emitting a rewarding intake howl as the rpms spin past 5,500. Its steering geometry has been sharpened, with the rake tightened up by a degree and the trail reduced by 0.4 inch, and ergonomics are small-frame-friendly — seat height is down more than half an inch to 31.1 inches, clip-ons are perched well above the triple clamp and the 4.0-gallon gas tank is narrow between the knees. So while my 34-inch-inseam legs got a bit cramped on longer rides and I found myself wishing for thicker seat padding (Kawasaki’s one-inch taller “extended reach” seat might solve both issues), I found the Ninja 650 to be comfortable enough for a 2½-hour-long freeway slog to Palm Springs or an afternoon ride on some favorite canyon roads.
The Ninja 650’s riding position is comfortably sporty, with tall, wide clip-ons, a low seat and reasonably placed footpegs. Photo by Kevin Wing.
Kawasaki says that about 60% of Ninja 650 owners primarily use it to commute and ride recreationally, but it’s on those sporty canyon roads that the Ninja’s newfound fighting spirit truly shines. It’s quick and flickable, with enough power to remain entertaining without demanding too much of its rider, nor requiring license-risking levels of speed. As is common in this category and price range, suspension is still rather basic, a bit underdamped and non-adjustable except for spring preload on the rear shock — the 41mm KYB fork has 4.9 inches of travel and the KYB shock 5.1 inches. Subsequently the bike can get pretty nervous when riding aggressively in rough corners, but on smoother roads the Ninja tracks through corners with confident stability, and the new Dunlop rubber offers predictable grip and feedback. An assist-and-slipper clutch mated to the six-speed gearbox also makes easy work of quick downshifts and commuter traffic alike.
Assist-and-slipper clutch makes easy work of stop-and-go traffic and quick downshifts. Both the brake and clutch levers are adjustable. Photo by Kevin Wing.
The 2020 updates are admittedly mostly cosmetic, but they’re like an outward representation of the Ninja 650’s forward progress — a black belt, to continue our martial arts analogy. The TFT display includes a slew of useful information, all easy to read even in direct sunlight, and new twin LED headlights not only look the business but also function extremely well, throwing bright white light far down the road as well as to each side. Overall this new Ninja 650 is at peak form, representing the new heights of performance and style we can now expect from today’s middleweight motorcycles.
Performance Fuel Capacity: 4.0 gals., last 1.0 gal. warning light on MPG: 87 AKI min. (low/avg/high) 59.9/60.9/62.0 Estimated Range: 244 miles Indicated RPM at 60 MPH: 4,400
Three brands, three middleweights, three engine configurations, three very distinct personalities. Which one are you? Photos by Kevin Wing.
Three riders walk into a dealership…. (I know it sounds like the start of a bad joke but bear with me.) All three are in the market for a new middleweight motorcycle, and each has a unique style and riding experience in mind. They’re in luck — thanks to a challenging economy, increasing growth in female ridership and a need to attract younger riders, manufacturers are doubling down on the small- and midsize-displacement market, meaning there’s a middleweight machine out there for just about anyone. We gathered three of the newest for an unorthodox Comparo Review; rather than pitting them against each other in a head-to-head battle, we thought instead we’d focus on each one’s unique personality. So here we are, the door just swung closed behind us, and our first rider already seems to know exactly what he wants.
We find him standing next to the Honda CB650R, where he’s admiring the waterfall of header pipes cascading from its 649cc, liquid-cooled, DOHC in-line four. The replacement for the stale CB650F, this fresh CB650R rounds out Honda’s Neo-Sports Café lineup, slotting in between the CB300R and CB1000R released for the 2018 model year.
Honda gave the middleweight CB more than just a facelift, with new wheels, an updated steel frame and a new, smaller fuel tank that combine to drop a claimed 9.2 pounds (11.6 pounds on the ABS version), a new inverted 41mm Showa fork with adjustable preload, a slightly more aggressive riding position and a redesigned airbox. The engine got a few tweaks as well, with new pistons and valve timing and a redline that’s been bumped up 1,000 rpm to 13,000. Also new this year is optional HSTC (traction control), which is only available on the ABS-equipped model and can be switched on and off on the fly.
Liquid-cooled, DOHC in-line four is the most potent of the trio, with 83 peak horsepower on tap.Switchable HSTC (traction control) is only available on the ABS model (which our test bike was not). LCD gauge includes range to empty, fuel gauge, gear indicator and a clock.
The result is a seriously sporty machine that will pluck at the heartstrings of any rider yearning for the howl of a rev-happy in-line four in an affordable, fun-to-go-fast package. This is a bike that’s happiest when wound up, with the real action not kicking in until about 6,000 rpm. Per the Jett Tuning dyno, the CB650R spins out a respectable 83 horsepower at 11,000 rpm, with torque topping out at 43 lb-ft at 8,200. “Go fast or go home,” says our rider as he swings a leg over the nearly 32-inch seat.
Footpegs are just a tad higher and farther back than before and the wide, flat handlebar is lower and more forward, but the riding position is still relatively comfortable, especially when compared to the drop-down sport position of our other two comparo bikes. With suspension front and rear being preload-adjustable, it’s easier to find a happy medium for sporting canyon runs and bombing around town, and powerful radial-mount, 4-piston front brakes pinching big 320mm discs provide more than enough stopping power. As someone unaccustomed to an in-line four with less engine braking than a twin, I was happy for the peace of mind those brakes offered when winding things up on a twisty road. While the CB could be a good first bike (Honda says 25% of its 650cc bikes are bought by first-timers), it’s got enough juice to keep an experienced rider happily entertained.
“And,” smiles our first rider as we wander away, “it’s the right color: red.”
It might be fair to say that rider number two is the polar opposite; he’s drawn to the Kawasaki W800 Cafe, a new model (in the U.S. and Canada) for 2019 that evokes the look and spirit of the original 1966 W1. For him, sheer performance numbers aren’t a priority, but rather classic good looks and a timeless sense of style — although a few modern conveniences like a bright LED headlight, ABS and fuel injection don’t hurt.
With the possible exception of the paint, which is a polarizing metal-flake-brown and silver combo (I happen to like it), the W800 checks all the retro-loving riders’ boxes in the appearance department. Central to that is the 773cc air-cooled, SOHC vertical twin, with its distinctive bevel gear shaft-driven cam and 360-degree firing interval. Despite its balance shaft the engine vibrates significantly at idle and throughout most of the powerband, but the wide-ratio 5-speed gearbox shifts smoothly (thanks in part to the assist-and-slipper clutch) and the chrome peashooter mufflers burble modestly. “It’s got character,” shrugs our rider.
Air-cooled parallel twin looks the part, but vibrates excessively at lower rpm and idle. ABS is standard on the single front and rear discs.Classic round gauges include analog speedometer and tachometer and LCD trip info; there is no gear indicator, fuel gauge or consumption data.
That character extends outward from the engine, with the old school double-cradle frame that was designed using Kawasaki’s advanced dynamic analysis software for new school handling, 18-inch spoked wheels rolling on tube-type Dunlop K300 GP rubber, dual rear preload-adjustable shocks, a 41mm gaitered fork and a classic clubman drop-down handlebar. The 31-inch two-tone seat is comfortable enough for about an hour at a time, and the riding position is sporty yet civilized.
Mid-mount footpegs will drag early, the vertical twin generates a middling 46.7 horsepower at 6,400 rpm and 44 lb-ft torque at 4,600, and the two brake discs, one front and one rear, both with 2-piston calipers and standard ABS, aren’t up to true sport riding levels, but that’s not what the W800 is all about. Cruising city streets and weekend jaunts into the countryside are what it was made to do, and you’re almost guaranteed to draw some admiring eyeballs when you get to your destination.
Now where did our third rider go? Ah, she discovered the Suzuki SV650X, which mixes the best of both worlds — sporty and retro — and also happens to be a time-tested, proven platform that’s been pasting smiles on faces since 1999, the year the original SV650 launched. In the intervening 20 years there have been S models with clip-ons and half fairings, but in my opinion this new-for-2019 café-racer X variation is the most true to the SV650’s spirit.
The bones haven’t changed: it’s still powered by the same 645cc liquid-cooled, DOHC, 90-degree V-twin that pulls strongly from idle to its peak of 69.3 horsepower at 8,700 rpm and 43.3 lb-ft of torque at 8,100, wrapped in a familiar steel trellis frame. Dual 290mm discs with 2-piston calipers up front and a single 240mm/1-piston combo at the rear work well, and ABS is standard. It’s shod with the best tires of the trio, grippy Dunlop Roadsmart IIIs.
If it ain’t broke…. Liquid-cooled 645cc 90-degree V-twin is still tractable and fun.The SV gets standard ABS and solid if not great braking performance.LCD gauge is simple and easy to read, with range to empty, a fuel gauge, a gear indicator and a clock.
The SV650X also continues to be one of the most user-friendly middleweights out there; nearly everything about it is approachable, from its one-touch Easy Start feature and Low RPM Assist that automatically raises engine speed when releasing the clutch, to its 31-inch seat, narrow waist, predictable powerband and no-frills, easy to read, comprehensive LCD gauge.
It’s responsive and stable, cool as a cucumber, never demanding too much of its rider even when the road gets twisty, and with some suspension work it could be a great track day warrior. Best of all, it doesn’t need to be wrung out in order to have fun, and is equally happy munching through traffic or carving up canyons — though not for hours on end. The fairly long reach to the clip-ons requires a strong core, lest too much weight is placed on the hands, and the low seat and tallish footpegs create an aching need to stretch out cramped-up knees. That said, if you’re young enough, fit enough and/or willing to rest often enough, the SV650X is a cool ride that looks, feels and sounds great.
The Choice
So which one am I? The Kawasaki looks the part, but its annoying vibration, squishy suspension, uninspiring power and high price tag are turnoffs. The quick, flickable Honda is a hoot to ride, but my personal preference is for low-end grunt over a high-strung in-line four. I don’t have a long commute and we have plenty of more appropriate touring bikes in the Rider garage, so for cruising around town and half-day blasts up the local canyons, the cool-as-a-cucumber Suzuki best matched my personality. Wait…does that make me the “cool kid”?
Jett Tuning Dyno results for the 2019 Honda CB650R, Kawasaki W800 Cafe and Suzuki SV650X.Jett Tuning Dyno results for the 2019 Honda CB650R, Kawasaki W800 Cafe and Suzuki SV650X.The Suzuki’s low and forward clip-ons demand youth or stamina, or both. The Kawi’s clubman requires a less dramatic lean, while the Honda is upright and all-day comfy.
Frame: Twin-spar steel w/ aluminum swingarm Wheelbase: 57 in. Rake/Trail: 32 degrees/4.0 in. Seat Height: 31.9 in. Suspension, Front: 41mm USD fork, adj. for preload, 4.25-in. travel Rear: Single link-type shock, adj. for preload, 5.04-in. travel Brakes, Front: Dual 320mm discs w/ opposed 4-piston radial calipers Rear: Single 240mm disc w/ 1-piston pin-slide caliper Wheels, Front: Cast, 3.50 x 17 in. Rear: Cast, 5.50 x 17 in. Tires, Front: 120/70-ZR17 Rear: 180/55-ZR17 Wet Weight: 441 lbs. Load Capacity: 342 lbs. GVWR: 783 lbs.
Performance
Fuel Capacity: 4.1 gals., last 0.8 gal. fuel light on MPG: 86 AKI min. (low/avg/high) 43.0/45.3/48.2 Estimated Range: 186 miles Indicated RPM at 60 MPH: 4,250
Photo by Kevin Wing.
2019 Kawasaki W800 Cafe Specs
Base Price: $9,799 Warranty: 1yr., unltd. miles Website: kawasaki.com
Engine
Type: Air-cooled parallel twin Displacement: 773cc Bore x Stroke: 77.0 x 83.0mm Compression Ratio: 8.4:1 Valve Train: SOHC, 4 valves per cyl. Valve Insp. Interval: 7,600 miles Fuel Delivery: DFI w/34mm throttle bodies x 2 Lubrication System: Wet sump, 3.4-qt. cap. Transmission: 5-speed, cable-actuated assist-and-slipper wet clutch Final Drive: O-ring chain
Electrical
Ignition: Digital Charging Output: 154 watts max. Battery: 12V 10AH
Chassis
Frame: Double-cradle steel w/ steel swingarm Wheelbase: 57.7 in. Rake/Trail: 26 degrees/3.7 in. Seat Height: 31.1 in. Suspension, Front: 41mm fork, non-adj., 5.1-in. travel Rear: Twin shocks, adj. for preload, 4.2-in. travel Brakes, Front: Single 320mm disc w/ 2-piston caliper & ABS Rear: Single 270mm disc w/ 2-piston caliper & ABS Wheels, Front: Spoked tube-type, 2.50 x 18 in. Rear: Spoked tube-type, 3.00 x 18 in. Tires, Front: 100/90-H18 Rear: 130/80-H18 Wet Weight: 488 lbs. Load Capacity: 407 lbs. GVWR: 895 lbs.
Performance
Fuel Capacity: 4.0 gals., last 1.1 gal. fuel light on MPG: 87 AKI min. (low/avg/high) 34.1/40.3/52.9 Estimated Range: 161 miles Indicated RPM at 60 MPH: 3,500
Photo by Kevin Wing.
2019 Suzuki SV650X Specs
Base Price: $8,399 Warranty: 1yr., unltd. miles Website: suzukicycles.com
Engine
Type: Liquid-cooled 90-degree V-twin Displacement: 645cc Bore x Stroke: 81.0 x 62.6mm Compression Ratio: 11.2:1 Valve Train: DOHC, 4 valves per cyl. Valve Insp. Interval: 14,500 miles Fuel Delivery: DFI w/ SDTV & 39mm throttle bodies x 2 Lubrication System: Wet sump, 2.9-qt. cap. Transmission: 6-speed, cable-actuated wet clutch Final Drive: O-ring chain
Frame: Steel trellis w/ steel beam-type swingarm Wheelbase: 56.9 in. Rake/Trail: 25 degrees/4.2 in. Seat Height: 31.1 in. Suspension, Front: 41mm fork, non-adj., 4.9-in. travel Rear: Single link-type shock, adj. for preload, 5.1-in. travel Brakes, Front: Dual 290mm discs w/ 2-piston floating calipers & ABS Rear: Single 240mm disc w/ 1-piston caliper & ABS Wheels, Front: Cast, 3.50 x 17 in. Rear: Cast, 5.00 x 17 in. Tires, Front: 120/70-ZR17 Rear: 160/60-ZR17 Wet Weight: 437 lbs. Load Capacity: 488 lbs. GVWR: 925 lbs.
Performance
Fuel Capacity: 3.8 gals., last 1.1 gal. fuel light on MPG: 87 AKI min. (low/avg/high) 38.9/53.1/58.7 Estimated Range: 202 miles Indicated RPM at 60 MPH: 4,250
With a taller, wider handlebar than its sportier Vitpilen siblings and reasonably placed footpegs, the Svartpilen puts the rider in position to comfortably tackle both traffic and twisties alike. Photos by Kevin Wing.
Different is good. What would our world be like if the only ice cream flavors were chocolate and vanilla? A life without Denali Mint Moose Tracks or Cherry Garcia would be rather bland indeed. And that’s why bikes like Husqvarna’s Svartpilen 701 excite me: it’s a refreshing antidote to the homogeny we can often detect creeping into our lives.
Husqvarna, founded in Sweden in 1689 as a manufacturer of guns and, since 1903, motorcycles, is probably best known for its off-road models, but after its motorcycle division’s acquisition by KTM in 2013 it decided to make a return to the street bike market — with a decidedly Scandinavian flair. Its current lineup of four street models includes the café racer-styled Vitpilen 401 and 701, the Svartpilen 401 scrambler and the Svartpilen 701.
Powered by the 693cc liquid-cooled single used in KTM’s 690 Duke and 690 Enduro, the Svartpilen 701 might be best described as a Swedish street tracker, complete with vestigial number plate on the right side, and its 18-inch front, 17-inch rear cast wheels are shod with the same Pirelli MT60 RS tires as those found on other street-oriented but off-road-flavored bikes like Ducati’s Scrambler lineup.
The harder you look at it, the more oddities — or art, per the eye of the beholder — you see. The engine is clutched within a tubular steel trellis frame — nothing outlandish there, but everything from there up (and back) is rendered in a futuristic blend of straight lines and curves, a departure from the origami angles of its KTM cousins.
Love it or hate it, you’ve gotta admit the Svartpilen 701 looks like nothing else on the road. Bonus: it’s a hoot to ride too!
The hard, nearly 33-inch-high seat makes ample use of the straight lines, including on its edges: uncomfortable at stops but surprisingly livable with feet on pegs and hands on the wide, slightly swept-back handlebar, at least for an hour or so at a time. No matter, you can’t even pretend that this is a touring bike, and at its intended purpose — carving up city traffic and twisty, technical roads — it succeeds in spades.
Fully adjustable WP suspension, though it boasts 5.9 inches of travel front and rear, is stiff and sporty, even at its softest settings. The throttle-by-wire EFI, pushing high-octane fuel through one big 50mm throttle body, prefers a heavy hand and higher rpm; a couple of times I felt some herky-jerkiness rolling back on out of a corner if I let the engine speed drop too far. There’s a slipper clutch if you like to keep your left hand active, plus an up/down quickshifter if you don’t, and traction control and ABS can be disabled if you so choose, although it’s all or nothing; you can’t disable/enable them separately.
The 4-valve single spins out an entertaining 72.4 horsepower at 8,200 rpm and almost 51 lb-ft of torque at 6,800, making the lithe 368-pound Svartpilen 701 gobs of fun and very easy to toss around, even for someone my size. Speaking of which, you may be looking at these road test photos and wondering if I ate the wrong mushroom in Wonderland, gaining several inches and more than several pounds. Not to worry, that’s Senior Editor Drevenstedt riding as my body double, since I was finishing up a European tour when the photo shoot occurred.
Wrapped in a steel trellis frame, the 693cc liquid-cooled single spools up quickly and the key to the engine’s smoothness is dual counterbalancers.
The Svartpilen and I got to know each other on the twisty roads of the Santa Monica Mountains, where I became smitten with its ruthless efficiency and seemingly effortless handling — as long as we were keeping the speeds below about 75 mph. Not a touring bike.
And as its looks might suggest, the Black Arrow (in Swedish, svart = black, pilen = arrow) isn’t without its quirks. For starters, fit-and-finish is a bit hit-or-miss…for example, both the Brembo front brake lever and Magura hydraulic clutch lever are adjustable, but the neighboring switchgear feels cheap and plasticky. The LED headlight and taillight are svelte and modern, but the single round LCD instrument is poorly lit with small numbers that are hard to read at a glance, and the buttons to change/reset the display are difficult to use. I also found the fuel gauge to be a bit pessimistic, with the range to empty requiring about a mile of riding after the bike was shut off/restarted before displaying again.
LCD instrument contains plenty of useful info, but is difficult to read and sticks out like a designer’s afterthought.
As personality traits go, these are quirks, however, not fatal flaws, and they disappeared pretty quickly when I was barreling up the canyon with a grin plastered across my silly face. For something so lightweight, the Svartpilen conveys a reassuring stability even as it’s flung left-to-right-to-left, the 72-ish horses being enough to keep an experienced rider entertained without feeling shortchanged by things like speed limits. A big 320mm front brake disc with 4-piston radial Brembo caliper and 240mm rear with a single-piston Brembo are more than up to the task if you do feel things getting out of hand.
After the fun is done, parked at the beach with the sun slipping under the pier and into the Pacific, I could sit and admire its rear three-quarter profile until darkness sent me home. Yes, different is good, and in a vanilla world it’s nice to get a bowl of Sea Salt Caramel now and then.
Admiring the sunset over the Pacific after a day of canyon carving on the Svartpilen 701.
Frame: Chromium-molybdenum tubular steel, aluminum swingarm Wheelbase: 56.5 in. Rake/Trail: 25 degrees/4.7 in. Seat Height: 32.9 in. Suspension, Front: 43mm USD fork, fully adj., 5.9-in. travel Rear: Single link-type shock, fully adj., 5.9-in. travel Brakes, Front: Single 320mm floating disc w/ radial 4-piston caliper & ABS Rear: Single 240mm disc w/ 1-piston floating caliper & ABS Wheels, Front: Cast, 3.00 x 18 in. Rear: Cast, 5.00 x 17 in. Tires, Front: 100/80-R18 Rear: 160/60-R17 Wet Weight: 368 lbs. Load Capacity: 403 lbs. GVWR: 771 lbs.
Performance
Fuel Capacity: 3.2 gals., last 0.7 gal. warning light on MPG: 91 AKI min. (low/avg/high) 53.6/58.4/63.2 Estimated Range: 187 miles Indicated RPM at 60 MPH: 4,000
The author flogging a 2020 Arch KRGT-1 along the Angeles Forest Highway. Photos by Alessio Barbanti/Arnaud Puig/ARCH Motorcycle.
I’m going to be brutally honest. I showed up in Pasadena, where Rider Magazine was being given the opportunity to ride the new Arch KRGT-1, with low expectations. That’s probably not fair, but it’s the truth. I’m jaded and cynical. I’ve ridden a lot of bikes, sat through a lot of technical presentations and talked to a lot of engineers and designers. There’s so much that goes into building a motorcycle from the ground up — one that not only looks good but functions well — that frankly I didn’t expect what I saw as a movie star’s pet project would amount to much of anything. (Keanu Reeves is a co-founder of Arch Motorcycle, along with designer and builder Gard Hollinger.)
Well, I was wrong.
Arch invited us to ride its KRGT-1 for a reason: they wanted it to get the regular treatment, a complete shakedown from a respected industry magazine. Still, Arch is a small company that hand-builds each machine to order, so I’d be surprised if Gard, Keanu and the rest of the crew didn’t harbor at least a little emotional attachment to the bike and our opinion of it. After all, they’ve invested years of blood, sweat, tears and time — in Gard and Keanu’s case, more than a decade — into the KRGT-1. And a couple of skeptical moto-journalists were getting ready to thrash two of the precious machines on one of the most famous (and locally notorious) stretches of curvaceous road in the LA area: the Angeles Crest Highway.
At the Arch Motorcycle factory in Hawthorne, near Los Angeles, we got to see (and sit on) the bike that eventually became the KRGT-1: a 2005 Harley Dyna. The only remaining original part is the engine.
Before we get to that, though, a brief backstory. Arch Motorcycle was born from circumstances that most of us can totally relate to: a guy (Keanu Reeves) had a motorcycle (an ’05 Harley Dyna) whose character (pure Americana) he loved…but he wanted more from it, specifically in the handling department. So he asked respected builder and owner of LA County Choprods, Gard Hollinger, if he could help. The two started making changes and adjustments. Afterwards Keanu would go out and ride the bike in the twisting canyons of the Santa Monica Mountains, then he’d return with feedback and they’d go at it again. By 2012, the ’05 Dyna they’d started with had morphed into the genesis of what would eventually become the KRGT-1. All that remained of the original machine was the engine — everything else, including the frame and swingarm, had been created from scratch. “You know,” they said to each other, “we could make more of these.” And so Arch Motorcycle was born.
So here we are in Pasadena, it’s 7:30 a.m. and one of those Southern California November mornings that elicits a groan of anguished envy from most of the rest of the country. We’d been given no technical presentation or press kit. Instead we were ushered to a corner of the hotel where we were introduced to both Gard and Keanu, slurped a bit of coffee and shown to the bikes. There were three examples sitting outside, red, blue and silver, and we were given our choice for the ride. Each KRGT-1 is unique, curated by the Arch team with the client to create a motorcycle that is ergonomically and aesthetically bespoke. In short, the bike is built to fit your body as well as to look the way you want it. I wondered silently for whom these three had been built, then was provided the answer for one—the blue one was Keanu’s personal bike.
The KRGT-1’s machined billet aluminum gas tank is a work of art and science in itself. It’s a two-part design, with the steel frame’s backbone running down the middle. The two halves attach on either side, with hoses keeping the fuel level equal, and once bolted on the tank(s) are stiff enough to act as a stressed member of the frame. In between sits Arch’s proprietary downdraft induction system, shown here, developed in partnership with K&N. Photo by the author.
Despite a Harley-Davidson being the genesis of the KRGT-1, the production bike is powered by a massive 124ci (that’s 2,032cc for those of you keeping score at home) S&S mill that Arch modified with its own primary drive, powertrain and clever 45-degree downdraft intake system that does away with the unsightly air filter protruding from one side. The frame is a steel and aluminum hybrid — steel downtubes and backbone, with machined aluminum clutching the rear of the engine and arcing over the rear wheel.
This is actually the second iteration of the KRGT-1 and a direct result of Keanu and Gard’s relentless quest for improvement. Compared to the first version released in 2015, the 2020 KRGT-1 includes more than 20 major changes and 150 new components, including the swingarm, suspension, brakes, bodywork and controls.
The first thing one must understand when looking at a KRGT-1 is that nearly every metal piece you see apart from the engine itself is machined billet aluminum. That includes the sculpted two-piece gas tank, which itself requires more than 33 hours to complete and is ingeniously designed to operate as a stressed member of the frame, the massive but lightweight swingarm, the headlight cowl and the side plates that accommodate the new swingarm pivot, which is attached directly to the engine.
Each KRGT-1 contains around 150 pounds of machined billet aluminum. Very clean examples are used for customers who want a bare, polished look, while parts with even a hint of imperfect swirling will be anodized.
The second thing is that no expense was spared. When you’ve got the support of Keanu Reeves, a true moto-head who owns but one car and goes everywhere on a motorcycle — if not his KRGT-1 then often an old Norton Commando — and a master of metal in Gard Hollinger, sparing no expense is something you can and should do. Fully adjustable front and rear suspension is by Öhlins and was developed in partnership with Arch specifically for this model. A new larger-diameter 48mm fork has a special carrier at the bottom to accommodate 130mm mounts for the massive new six-piston ISR calipers (two-channel Bosch ABS is standard). Clutch and front brake assemblies are by Magura, five-spoke carbon fiber wheels are by South African company BST (Blackstone Tek), exhaust is by Yoshimura and tires are Michelin Commander IIs.
Arch Motorcycle R&D Manager Ryan Boyd (left) is the man responsible for taking each KRGT-1 from computer screen design to finished product.
Settled into the deeply scooped saddle, feet on the narrow forward controls, we gradually wicked up the pace as we climbed the mountain, holding the throttle open a bit more and bending a bit deeper with every corner. It might resemble just another custom chopper from a distance, but I was having one of those come-to-Jesus moments where one realizes that one’s prejudgment was quite wrong and one will have to explain this in a (hopefully) well-written review pitched at others likely to have the same prejudgmental opinions.
Now, is this a Panigale or RSV4 or ZX-10R? No, and Arch doesn’t make such ridiculous claims. What it is: an American cruiser, distilled to its essence then fortified with top-quality components and construction techniques designed to bring out the best in performance. Despite the 240-series Michelin rear tire, the KRGT-1 leans willingly and, once there, sticks stubbornly to its line. The long wheelbase helps but so does the stiff chassis and the downright amazing suspension, which was plush yet offered good feel and matched up well with some of the best front brakes of any bike I’ve yet ridden. And with a claimed 122 lb-ft of torque at the rear wheel it pulls like a freight train down low, although it runs out of juice fairly early — remember this is a power cruiser, not a superbike.
Admittedly I was riding a bit more cautiously than normal, given this bike belonged to a certain actor, but still the KRGT-1 impressed with its seriously sporty handling. With the right pilot aboard this thing might catch an unsuspecting sport rider by surprise.
By the time we stopped midway through the ride to meet up with Keanu and Gard for a quick Q&A before continuing on, it had become clear this was a machine that had been tested and developed in the canyons and on the mountain roads of the Santa Monicas, not (flat, straight, traffic-choked) Hawthorne Boulevard. “But it also has to work on Hawthorne Boulevard,” responded Keanu matter-of-factly.
And to that end, I was a bit surprised at how docile and easy to handle the fire-breathing monster could be. In hot, stop-and-go city traffic, sure the clutch pull starts to feel a bit heavy and the S&S generates considerable heat, but throttle response is smooth and linear and the low-to-mid powerband feels flat as a pancake (I’d love to get a KRGT-1 onto the Jett Tuning dyno). Vibration from the rubber-mounted engine is readily apparent at stoplights but smoothes right out once underway. It cruises the city boulevards like, well, a cruiser should. In short, Gard, Keanu and team have actually created an American bike worthy of the often over-used term “power cruiser.”
The KRGT-1 cruises like a boss. Loping along at 1,800 rpm, give the throttle a twist in any gear, however, and hold on tight.
What makes the KRGT-1 special, however — what justifies its $85,000 out-the-door price tag — is not just its performance. It’s the fact that when you buy one you’re getting a machine that is hand-built and made specifically for you. The process is a consultation rather than a “sign here” order taking, with the new owner remaining in close partnership with the Arch team throughout the 90-day build. Since there are no dealerships, any aftersale work is coordinated with local service centers vetted by the Arch team, and in many cases the owner has the direct contact info for R&D Manager Ryan Boyd, in case questions or issues arise.
So while it’s true that the KRGT-1 is a limited-production, hand-built, expensive piece of rolling art it’s also a bike that performs better than it has any right to, and that is a direct result of the vision, passion and talent of Gard Hollinger, Keanu Reeves, Ryan Boyd and the entire Arch team. And they aren’t stopping here — next up is a naked sportbike dubbed the 1S. Here’s to hoping I get invited to ride that one too.
2020 Arch Motorcycle KRGT-1.
2020 Arch KRGT-1 Specs
Base Price: $85,000 Website:archmotorcycle.com Engine Type: Air-cooled, transverse 60-degree V-twin, DOHC, 2 valves per cyl. Displacement: 124ci (2,032cc) Bore x Stroke: 104.8 x 117.5mm Transmission: Arch proprietary 6-speed w/hydraulically-actuated dry clutch Final Drive: O-ring chain Wheelbase: 68 in. Rake/Trail: 30 degrees/5.0 in. Seat Height: 27.8 in. Claimed Dry Weight: 538 lbs. Fuel Capacity: 5 gals. MPG: NA
Keep scrolling for more pictures!
The author poses with Arch Motorcycle founders Keanu Reeves and Gard Hollinger.LED headlight includes cornering lights.Massive six-piston ISR calipers squeeze two floating 320mm discs up front, while a four-piston caliper pinches a 240mm in the rear. Bosch ABS is standard.Billet aluminum abounds, including around the old-school red dot matrix display and even the key.The hybrid steel/aluminum frame includes a new swingarm pivot built into the rear of the engine.Scooped seat is customized to fit each client.More billet aluminum: the headlight cowl.Serrated pegs offer excellent grip, which is good given the narrowness of the forward controls.Inside the Arch Motorcycle factory in the Los Angeles area.The Method 143 is a radical prototype that will give birth to Arch’s next model, the 1S.
2020 BMW F 900 XR in Racing Red. Images courtesy BMW.2020 BMW F 900 R in Hockenheim Silver Metallic/Racing Red.
BMW surprised us with two new mid-range models, the 2020 F 900 R and the F 900 XR, both based around a slightly enlarged version of the parallel twin released last year that powers the F 850 GS. With an increase from 853cc to 895cc, BMW says the new engine is good for 105 horsepower and 68 lb-ft of torque, and its dual counterbalancers result in a smooth riding experience.
Apart from the engine, the 2020 F 900 R and the F 900 XR also share a steel frame and rear subframe and feature unique lightweight plastic-welded fuel tanks (3.4 gals. for the R, 4.0 gals. for the XR), a 6.5-inch TFT display, LED lighting, two ride modes (Rain and Road), ABS and ASC (Automatic Stability Control) as standard.
A 6.5-inch TFT display will come standard on both the F 900 R and F 900 XR.
Options include Riding Modes Pro, which adds Dynamic and Dynamic Pro ride modes, Dynamic Traction Control (DTC), cornering ABS (ABS Pro), Dynamic Brake Control (DBC) and engine drag torque control (MSR), which prevents rear wheel hop when decelerating. Dynamic ESA (electronic suspension, rear only) is also available as is Headlight Pro, which adds cornering lights, and Keyless Ride.
Both models feature an upside-down fork and rear monoshock, with 5.3 inches of travel at the front, 5.6 at the rear on the F 900 R, and 6.7 front, 6.8 rear on the F 900 XR.
The 2020 F 900 R will be available in Blackstorm Metallic, San Marino Blue Metallic and Hockenheim Silver Metallic/Racing Red. The 2020 F 900XR will be available in Light White, Galvanic Gold Metallic and Racing Red. U.S. pricing and availability are TBA.
Keep scrolling for more photos….
2020 BMW F 900 XR in Racing Red.2020 BMW F 900 XR in Galvanic Gold.2020 BMW F 900 XR in Light White.Plenty of touring accessories will be available for the F 900 XR, including the lights and saddlebags as seen on the bike to the left.2020 BMW F 900 R in Hockenheim Silver Metallic/Racing Red.2020 BMW F 900 R in Blackstorm Metallic.2020 BMW F 900 R.
Kawasaki is updating its Z650 and Z900 naked sport bikes for 2020, with the Z900 receiving the most significant changes that bring it up-to-date and closer to its competition technology-wise.
The Z900, which was first launched back in 2017, impressed us from the start with its smooth, tractable power and rider-friendly character, but we dinged it for its lack of electronic rider aids when compared with the competition. (Read our comparison shoot-out review of the 2017 Z900 and the Yamaha FZ-09 here.) Kawasaki has addressed that complaint for 2020, giving the Z900 updated electronics, plus some tweaks to the frame and suspension and a light facelift.
Ride and power modes are new for the 2020 Z900.
Kawasaki Traction Control (KTRC) includes three modes: Modes 1 and 2 control ignition timing to prevent wheel slippage in sport riding conditions, while Mode 3 has higher sensitivity and controls ignition timing, fuel and air for ultra-smooth operation. Two power modes operate independently, with full and low (approximately 55% of full with a milder throttle response) options.
Additionally, the Z900 also offers Integrated Riding Modes that link the KTRC and power modes for quick and easy adjustment to suit a giving riding situation. There are four modes, Sport, Road, Rain and Rider (manual).
The 2020 Z900 will be equipped with a 4.3-inch TFT display that incorporates Bluetooth smartphone connection via the Rideology app.
Other changes for 2020 include a new 4.3-inch TFT instrument that incorporates Bluetooth smartphone connection via Kawasaki’s Rideology app, a revised frame with added strength in the swingarm pivot area, updated suspension settings, slightly revised styling that includes an LED headlight and new Dunlop Sportmax Roadsport 2 tires.
The 2020 Kawasaki Z900 will be available in Metallic Spark Black/Metallic Flat Spark Black and Candy Plasma Blue/Metallic Matte Fusion Silver for $8,999 ($9,299 for ABS version).
2020 Kawasaki Z900 in Metallic Spark Black/Metallic Flat Spark Black.
Meanwhile, the 2020 Z650 gets a light style refresh that includes an LED headlight, TFT display with Rideology app connectivity and new Dunlop Sportmax Roadsport 2 tires. It will be available in Metallic Spark Black and Metallic Spark Black/Metallic Flat Spark Black starting at $7,249 ($7,649 for ABS version).
2020 Kawasaki Z650 in Metallic Spark Black.2020 Kawasaki Z650 in Metallic Spark Black/Metallic Flat Spark Black.The 2020 Z650 will be equipped with a TFT display that includes Bluetooth smartphone connectivity via the Rideology app.
Bringing you the Best Motorcycle News from Around the Web!
We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.Ok
