Category Archives: News

News Articles

BMW Motorrad serious about hybrid drive

BMW Motorrad seems pretty serious about building a two-wheeled version of the hybrid Toyota Prius with yet another patent filing for hybrid drive.

Their latest patent filing shows the hybrid-drive battery for the electric motor located in the fuel tank.two=whee-drive patent serious

While that would sacrifice fuel range, the hybrid drive system would make up for some of the range.

It also appears the battery may be removable so you can make full use of the tank’s full capacity.

In 2017, BMW filed these simplistic hybrid patent drawings with the German patent office, although they were not released until February this year.Hybrid drive serious

These two patent filings would make the motorcycle a two-wheeled version of the hybrid Toyota Prius which is powered by both an electric motor and a conventional fuel-powered engine.

The first filing was for an electric motor and boxer engine both delivering power to the rear wheel.

Hybrid drive serious
Hybrid drive patent drawing

They would be connected by a planetary gear system with a torque-limiting slip clutch on the electric motor driving the crank.

The electric motor would also function as a starter motor and generator, converting mechanical power from the boxer engine into electricity.

Being a hybrid-drive system, BMW could reduce the size of the boxer engine and appease stringent Euro 5 emissions targets due in 2020.

Serious pranksters

On April Fool’s Day, 2017, BMW announced a two-wheel-drive version of its R 1200 GS Adventure.

They called it xDrive Hybrid, but it was for a two-wheel-drive motorcycle, not a hybrid-powered bike.

At the time, BMW Motorrad Australia GM Andreas Lundgren said there was a “very thin border between fact and fiction in their pranks … the concept is plausible”.

The Bavarian jokesters are famous for their April Fool’s Day jokes, having begun running spoof advertisements on April 1 in the early 1980s.

BMW’s marketing department says April Fool jokes are “designed to teeter on the verge of credibility” and often focus on a new and revolutionary piece of technology, but “push the idea just beyond the plausible.”

Some of their other April 1 pranks were a self-cleaning car, remote-inflatable tyres, dog-repellent bumpers, tyres that melted snow and a self-driving car that follows you when you go for a jog.

However, BMW may still be serious about a two-wheel-drive adventure motorcycle in the future.

There have been several other two-wheel-drive motorcycles before, most notably Yamaha’s 2WD system called 2-TRAC. They used it to tackle the Dakar Rally but it never made it into mass production.

The idea is not dead yet with Yamaha, either. Their PES2 electric bike is 2WD and the Japanese company has filed a patent for a new 2WD system with an electric motor driving the front wheel.

Other 2WD products and concepts include the Christini dirt bikes, Suzuki Nuda concept, Rokon, Ural 2WD outfits and Australia’s own Drysdale stroker which was intended for the Australian Army.

But the biggest hint that BMW may actually be considering a 2WD bike comes from BMW accessories company Wunderlich

In 2016, they developed an electronic two-wheel-drive system for the R 1200 GS that also gives it a reverse gear.

The Wunderlich invention is basically a 7.6kW electric hub motor in the front wheel that neatly fits inside the ABS ring.

It sounds very similar to what BMW proposed in their 2017 April 1 press release and their patent filings.

Source: MotorbikeWriter.com

Conor Cummins on his Senior TT podium placing

Conor Cummins Interview

Conor Cummins edged out Michael Dunlop for the final position on the podium of the 2019 Senior TT at the Isle of Man, while still working towards that illusive sub-17min lap time over the famous mountain course. Here’s what he had to say following the Senior TT.

IOMTT Qualifying Sunday Conor Cummins
Conor Cummins

Conor, another big bike podium, a double big bike podium in 2018, and again in 2019.

Conor Cummins: “Yea I’m really happy with it, I just want to say a big thanks to Padgetts Racing team, they put great bikes underneath me. I got off to a steady start and just found a decent rhythm and Dean came past me at Sulby or somewhere, and I tagged onto the back of him and found a bit of a rhythm there.

“The bike was faultless, bit of an issue mid-race where I tried to manage it a little bit, but it wasn’t going to effect the result at all. It was just a bit of a handling problem we had, but we’ll get it sorted for next year. Looking forward to TT 2020.”


Mid-race you got into a big battle for position with Michael Dunlop.

Conor Cummins: “I was watching my boards a lot of the time and I managed to edge three-seconds on him, and just managed to build a bit of a cushion and I think I ended up with 20 plus seconds at the end. It’s a mega competitive field at the TT this year, so strong and to get on the podium I’m really happy, and again a big thanks to the Padgetts Racing team for all their efforts.”

IOMTT Race Superbike Cummins
Conor Cummins

That sub-17 minute lap still a target for you?

Conor Cummins: “Yea, yea it is, maybe with a bit more practice I’d probably go sub 17min I think. The fact is I haven’t done it, so we’ll just work on next year and come back stronger.”

IOMTT Senior Podium Harrison Hickman Cummins
2019 Senior TT Results
Dean Harrison / Kawasaki
Peter Hickman / BMW +53.062
Conor Cummins / Honda  +58.879

2019 Senior TT Results

  1. Dean Harrison / Kawasaki
  2. Peter Hickman / BMW +53.062
  3. Conor Cummins / Honda  +58.879
  4. Michael Dunlop / BMW +1m26.709
  5. James Hillier / Kawasaki +2m30.352
  6. Davey Todd / BMW +2m32.920
  7. Michael Rutter / Honda +3m03.571
  8. Jamie Coward / Yamaha +3m13.561
  9. Brian McCormack / BMW +3m49.971
  10. Dominic Herbertson / Kawasaki +4m09.262

Source: MCNews.com.au

Oxford Continental Adventure Gear arrives in Oz

Oxford Continental Adventure Gear


If you know Oxford, then you know you’re in for a treat, especially with the release of new products into their extensive range of riderwear, accessories, luggage and security. Based in Oxfordshire, UK the purpose-built headquarters works tirelessly to provide some of the highest quality products for motorcyclists worldwide.

Oxford Continental Adventure Gear Features
Oxford Continental Adventure Range

As winter is upon us, the spotlight is drawn to the next level of Oxford advanced riderwear – the Continental. Uniquely designed to tackle the harshest weather conditions, the Continental jacket and pants are the ultimate option for riders.

With layers as thick as rhino skin and heavy duty zipped pockets, it’s easy to see why the Continental is part of the “Advanced Rider Series.” The Oxford Continental range is for serious riders; and with the UK being the epitome of predictably wet and cold weather, it’s clear to see that these poms are rather good at what they do! If you’re looking for adventure gear that will survive a tsunami, then these quintessential garments are the right buy for you.

Oxford Continental Adventure Gear features
Oxford Continental Adventure Range

Oxford Continental features

  • WarmDry Thermal Tech
  • Removable Thermal Insulation
  • Breathable Membrane
  • Zip Open Ventilation
  • Mesh Ventilation
  • Dry2Dry Waterproof Tech
  • Removable Waterproof Liner
  • CE Protectors
  • Height adjustable protector
  • Pockets (pants only)
  • Reflective printing
  • Back protector Pocket
  • Polyester outer shell
  • Nylon bonded coats thread
  • Hidden structure stitching
  • Reinforced structure
  • Bar-Tack Stitching
  • YKK Zipps
  • 360º & short connecting zips
  • Detachable braces
  • Sizing: S-5XL
  • TM181201 – Tech Grey Jacket – $479.95
  • TM181202 – Black/Fluro Jacket – $479.95
  • TM186301 – Tech Black Pants – $399.95
Oxford continental pants strap front
Oxford Continental Adventure Pant
Oxford continental black grey reverse
Oxford Continental Adventure Jacket
Oxford continental black fluro front
Oxford Continental Adventure Jacket

Source: MCNews.com.au

Lower speeds at regional intersections

A plan to temporarily lower speed limits on regional highway intersections when approaching side-road traffic is detected may not work for motorcycles.

The technology has been initially installed at the intersection of Glenelg Highway and Dunkeld-Cavendish Road and Penshurst-Dunkeld Road, near Dunkeld, Victoria, and will be rolled out across the state.

Watch this video to see how it works.

The problem for riders is that it uses the same inductor loop technology deployed at traffic lights that often fails to detect small motorcycles.

Click here to read how to improve your chances of detection by these loops.

Lower regional speeds

The new technology follows a recent call to reduce speed limits on unsealed country roads.

VicRoads says this new side-road-activated speed technology will trigger an electronic speed sign to lower the speed from 100km/h to 70km/h on the Glenelg Highway.

“There are no plans to install speed cameras through the side-road-activated reduced speed zones,” VicRoads told us.

However, we expect there may be extra policing at these intersections to enforce compliance.

The electronic speed limit sign will also be activated by vehicles waiting to turn right from Glenelg Highway on to either Dunkeld-Cavendish Road or Penshurst-Dunkeld Road.

Lower speed limits on rural intersections
Glenelg Highway image shows Dunkeld-Cavendish Road on the left and Penshurst-Dunkeld Road on the right (Google Maps).

“The reduced speed limit will stay activated until there are no more vehicles on the side roads waiting to enter or cross the main road,” VicRoads says.

VicRoads is also installing short lengths of “flexible steel guard fence” in front of the new electronic signs to reduce the risk of motorists crashing into them.

Local rider Anthony Morrison says he is concerned about the new technology.

“My concern naturally as a rider coming along a 100km/h zone and suddenly presented with a 70 speed sign with a car behind me is scary just like the 40 with flashing lights,” he says.

Click here for more on the 40km/h emergency vehicle rule.

History of crashes

VicRoads says 70% of fatal intersection crashes in regional Victoria occur on high-speed roads.

“Intersections in regional areas have a greater risk due to higher travel speeds, particularly where small side roads meet main roads,” VicRoads says.

“This intersection near Dunkeld has seen two crashes in the past five years, with one resulting in serious injuries.”

VicRoads claims the benefits of side-road-activated speeds are:

  • Instructing drivers on the main road to slow down if there are other vehicles approaching from side roads;
  • giving drivers on the main road more time to react if side traffic fails to give way;
  • giving drivers on side roads more time to assess gaps in traffic and enter the main road safely;
  • letting drivers know they’re approaching an intersection, which will prepare them for any merging traffic; and 
  • significantly reducing the severity of crashes due to the reduced speed limit when traffic is merging from side roads.

“A similar program in New Zealand has reduced serious and fatal crashes at intersections by 89% since 2012,” VicRoads says.

Source: MotorbikeWriter.com

Anderson Stands struggling with demand

After reopening in 2018, famous Australian motorcycle stand business Anderson Stands has been struggling to keep up with the strong demand from customers.

New owner Michael Jeffery has replied to several of our readers who have expressed concern that they cannot contact the company and feared they had gone out of business again.

“We are still in business and the business of Anderson Stands is growing from its new start up quicker than I have been able to keep up with,” says Michael, a passionate Sydney-based motorcycle racer.

The mechanical engineer, fitter, machinist, welder and fabricator bought Anderson Stands more than a year ago after founder Chris Anderson decided to wind up the business.

Michael says he wanted to keep alive the iconic Australian brand and its quality product line.

“These are a quality made stands and a staple in the Australian marketplace,” he told us.

Anderson Stands struggling

Struggling to keep up

However, it has been hard work and the company is struggling to keep up with the flood of orders.

“The unfortunate result of this is we have not yet been able to get ahead in our manufacturing and the stands are selling quicker than we can produce them,” Michael says.

“The fallout from this is we have been unable to engage with every customer enquiry as we look to find the balance between the manufacturing and our customer service.

“Please let people know that we are working day and night to get ahead and re-establish Anderson Stands back into the motorcycle market place.

“I had intended to re-establish Anderson Stands initially with a low profile so that I could get some products into productions.

“The unfortunate result has been our low profile has only generated more interest towards Anderson Stands and everyone is chasing to have one.”

Anderson StandsAnderson Stands struggling

Bright red powder-coated Anderson Stands have been used by road riders, professional racers and race teams for more than 30 years.

They have an enviable reputation for quality and performance.Anderson Stands struggling

The original stands claim several firsts: adjustable width and interchangeable attachments; Big Wheel design; height adjustment; Castor stands (dubbed the Spacesavers); and a front Under Fork stand.

“They are Australian made with Australian steel and Australian quality and manufactured right here in Sydney,” Michael told us last year when the company relaunched.Anderson Stands struggling

“Chris designed, fabricated and manufactured these stands to be functional and lifelong, with no compromises and we will continue to manufacture Anderson Stands true to these values.

“We are not going to compete against the Chinese market, we do not build Flat-Pack stands.”

All their stands are fully seam-welded and powered-coated.

Click here to see their product list and prices.

And please be patient!

Source: MotorbikeWriter.com

2019 Honda CB650R MC Commute Review

The 2019 CB650R is powered by a 649cc inline-four engine that was purpose built for life on the street. Although it shares the same cylinder bore measurements as the CBR600RR engine, Honda assures us the engines are completely different. And you can tell from the moment you lift the kickstand. As opposed to a conventional middleweight 600, the CB jumps away from stoplights with added vigor. Yet it still has that same fun, rip-roaring sound and four-cylinder power rush, only more usable.

Source: MotorCyclistOnline.com

Openbank named title sponsor of Angel Nieto Team in MotoE™

The Angel Nieto Team has over 25 years of experience, 11 world titles, 130 victories and a total of 355 podiums under its belt. It is managed by Jorge Martinez ‘Aspar’, four-time World Champion and boasts two top level riders in Maria Herrera, the only woman competing in the MotoE™ World Championship, and the 2011 125cc World Champion, Nico Terol. Both riders project the same values that define Openbank: diversity, talent and a forward-looking approach.

Source: MotoGP.comRead Full Article Here

Lap records look set to tumble in Barcelona

The soft and medium fronts brought to the Catalan GP by the French factory will be symmetric, with the front hard and all of the rear tyres having an asymmetric finish, featuring a harder right-hand-side, to cope with the eight turns which go in that direction, compared to just the six that go left.

Source: MotoGP.comRead Full Article Here

New Gear: Cortech Standard and Primary Riding Jeans

Cortech Primary motorcycle riding jeans (front and rear).
Cortech Primary motorcycle riding jeans (front and rear).

Stay protected with a casual look in Cortech’s new Standard ($124.99) or Primary ($199.99) riding jeans. Both feature a relaxed fit and mid-rise waist, with pockets for optional SAS-TEC knee and hip armor. The Standard is constructed from 14-oz. denim lined with Kevlar from waist to shin, while the Primary is made from a blend of 13.5-oz denim, Cordura nylon and Kevlar for single-layer comfort. Both are available in blue in men’s waist sizes 30-42, all with a 32-inch inseam.

See your dealer or visit cortech.net.

Source: RiderMagazine.com

Time schedule: Gran Premi Monster Energy de Catalunya

The first bit of action at the Catalan GP will be the Moto3™ riders rumbling down pitlane at 09:00 local time (GMT+2) for FP1, before the fans in attendance are treated to their first taste of MotoGP™ bikes at 09:55, with the Moto2™ riders then coming out on track at 10:55. MotoGP™ FP2 kicks off at 14:10.

Source: MotoGP.comRead Full Article Here