Tag Archives: road safety

Narrow lanes would promote riding

Rather than making roads wider, new research shows that adding more narrower lanes to existing roads would not only aid traffic flow but also promote more motorcycles and scooters.

University of Melbourne professor Chair of Statistics and motorbike rider Prof Richard Huggins says the plan has some merit.

The Grattan Institute suggests narrow lanes would reward motorists in smaller cars and on powered two wheelers and encourage people to ditch big SUVs in the city.

Melbourne City Council’s future transport strategy has picked up on the idea which has been welcomed by the Victorian Motorcycle Council.

VMC media spokesman John Eacott says altering road design to include narrow lanes dedicated to small traffic such as micro and light cars and motorbikes would have a beneficial effect on congestion.

Prof Huggins says it would be a good idea “at least in Melbourne”.

Melbourne roads lane filtering more often congestion promote
Melbourne traffic

“It would make the last bit of people’s commute much easier and safer,” he says.

“We had a very informal chat with City of Melbourne a few years ago about something similar (back then a narrow lane for single track vehicles) but as there were no regulations to cover such a lane it didn’t get to square one.”

Promote small cars and bikes

The Grattan Institute report says Australian cars are getting wider.

In the early 2000s, Aussie motorists started ditching their large sedans for hatchbacks.

However, in the past decade or more, they have swung over to SUVs and pick-ups which are much wider.

The report claims these wide vehicles are causing congestion because they limit visibility and intimidate other drivers.

They say adding a narrow lane would encourage motorists to switch to smaller cars and motorcycles and increase the capacity of roads to carry traffic.

Of course, a simple solution would be to allow motorcycles to use bus lanes and bike lanes. (Motorcycles are allowed to use bus lanes only in NSW, ACT and some Melbourne streets on a trial basis.)

But there is another result which the safety Nazis will just love.

Narrow lanes would force drivers to be more cautious and slow down.Commute traffic lane filtering speed wet NSW sydney police commuting slow speeding speed limit

The Grattan Institute also suggested in 2017 that a congestion tax should be introduced in Sydney and Melbourne during peak hours within five years.

That is another suggestion that Melbourne City Council has embraced. Click here to read more.

Source: MotorbikeWriter.com

Gloves and jeans fail safety tests

Motorcycle gloves and jeans have once again scored a big fail in the independent Australian MotoCAP safety ratings while the jeans scored well for thermal comfort.

The latest round of testing includes five pair of jeans and four gloves.

Only one set of gloves scored two safety stars, while the rest scored just one.

It follows August results for seven pairs of leather and textile motorcycles gloves which also recorded a fail in the MotoCAP safety ratings.

The MotoCAP website now lists 47 pairs of gloves in its list of 144 products tested and rated.

So far, not one pair of gloves has rated a full five stars.

Click here for the full results.

Comfy jeans

All five pairs of jeans tested have scored either three or four stars out of five for thermal comfort, which is an improvement in this category compared with previous releases.

The highest overall performing pair of jeans is the Draggin Jeans Twista jeans, which scored four out five stars for thermal comfort.

kevlar jeans
Draggin Twista jeans

While thermal comfort was good, safety was another fail.

Twista scored two out of five stars for protection, while of the other jeans tested, three scored one star for safety and one scored only half a star.

MotoCAP has now tested 41 pairs of jeans.

Click here for the full jeans results.

No comfort ratings

The world’s first safety and comfort ratings system for motorcycle clothing provides comfort ratings for thermal comfort and waterproofing on jackets and pants, but not gloves.

That is despite some of the gloves tested having perforations for airflow.

It also comes as the latest Canstar Blue customer satisfaction research found Baby Boomers are more likely to choose comfortable motorcycle gloves while Millennial riders buy for style.

Transport for NSW says that to measure for comfort a large square of fabric must be obtained.

“There is not enough material in a glove to obtain a sample for the thermal comfort measure,” they say.

However, they do test for waterproofing and three pairs of gloves were tested because they were advertised as having this feature.

The highest performing pair are the DriRider Apex 2 unisex gloves, which received a score of eight out of ten for water resistance.

Transport for NSW says there has been “interest from some manufacturers to have their items rated”.

However, all gear rated so far has been obtained through a secretive buying system to guarantee integrity.

Click here to find out how products are selected for rating in secret.

Source: MotorbikeWriter.com

Why Motorcycle Visibility Should Be Among Your Safety Priorities

(Sponsored post on safety priorities for our North American readers – Image: Pexels)

No motorist wants to cause harm to other people because of their driving. But, despite the best intentions and the best efforts at avoiding accidents, they still happen. Barring the factor of negligence, this could already be the makings of an awful accident

While the inherent danger applies to all motorists on the road, the dangers are much more amplified in the case of motorcyclists. Whether it’s due to motorcycles having lighter frames, less protection compared to cars, or being smaller and more difficult to see, the dangers that motorcycle riders face are much more significant.

While motorcycle manufacturers do their best to create motorcycles that are as safe as possible, the numbers speak to the uphill battle they face. There is still a significant number of motorcycle rider deaths and, as of now, the only true guarantee of a safe journey is the total avoidance of an accident. A lot of accidents can be averted by remaining extremely aware of all other cars and people around you so you can react to avoid an accident before it happens. And even when you have professionals like the lawyers at Tario & Associates who specialize in handling cases involving vehicular accidents, accidents are events that you’re best avoiding.

As a motorcycle rider, it’s important to be seen by other motorists on the road as it allows them to make the correct driving decisions that would prevent untoward accidents. So, what are some measures that we can take in order to make our presence of the road known to other motorists?

Daytime Running Lights

While a lot of sources will suggest using a high beam during the day time, this is counterintuitive as instead of making your presence felt to other motorists, you could end up blinding them. Daylight running lights are designed specifically for the purpose of making sure that your vehicle is visible without being too bright for other drivers.

Use Reflective Tape

You can also opt to use reflective tape on various parts of your motorcycle so that you motorcycle is more easily seen at night when drivers rely heavily on the illumination provided by the headlights of their car. This is even more important because vision at night is limited.

Wear Brightly Colored Gear

Sometimes reflective tape may not be enough to catch the attention of other motorists especially when reflective tape will almost always come in a single color. Resolve this issue by wearing brightly colored gear in order to make yourself visible. 

Use Your Turn Signals

Finally, being visible isn’t going to mean much if the other motorists are unable to predict your movements. While the use of turn signals is a basic habit that all riders should have, it is one that is so easily overlooked. Many accidents can be so easily avoided just by indicating your intentions while on the road. This allows other motorists to make adjustments to their path if necessary.

The issue of safety should always be among your priorities. Vehicular accidents should never be taken lightly and as motorcycle riders, it’s important to minimize the risks involved. 

Source: MotorbikeWriter.com

Komine mesh vest for long hot summer

This Komine JK-084 3D mesh inner vest will take the heat out of your riding this long, hot summer.

We’ve already had a few days riding in almost 40C heat, so we’ve been able to give this vest a good test under both a leather jacket and a flow-through mesh summer jacket.

While it may seem strange that adding more clothing will make you cooler, this vest actually works.

At least, it does with the leather jacket. It actually makes the mesh jacket feel a little warmer, but does stop your back from sweating and sticking to the back protector.

Komine vestKomine JK-084 3D mesh inner vest

The Japanese-made Komine vest is available for $55 through Melbourne-based zarkie.com.au.

It is made of polyester in a wide, three-dimensional honeycomb pattern and is worn under your jacket.

The idea is that it creates a mesh cavity around your torso to allow cooling air to pass around your body.Komine JK-084 3D mesh inner vest

Most ventilated summer jackets fit snug against your body in various places, especially where there is armour. This prevents the airflow from cooling you down.

However, the mesh cavity created by this vest makes sure the air has somewhere to flow.

It’s great when worn under jackets that only have a few vents.

However, it is kind of superfluous with mesh jackets, although it does provide an air passage between your skin and the back protector so your back doesn’t sweat.

It’s not all that soft to the touch, yet it is flexible and feels quite comfortable when worn under a jacket and over a t-shirt.

FittingKomine JK-084 3D mesh inner vest

It is fairly thick, so it could make your jacket quite tight.

I wore it under a leather Merlin Chase leather jacket which has only a couple of vents.

It improved the airflow and since I had removed the thermal liner, it wasn’t a snug fit.

They also say it adds some impact absorption but we think that would be fairly minimal.

While we reckon it’s useful with certain jackets, we would like to see a full jacket version with sleeves.

Because you often bend your arms when riding, air can’t effectively flow up your sleeves. A jacket version of this mesh vest might solve that problem.

It comes in sizes SX to 5XL in black only.Komine JK-084 3D mesh inner vest

I normally take large size, but I got the European XL (Japanese 2XL) and it fit me quite well.

A larger colleague was also able to zip up the stretchy jacket, but then the zip burst! We were able to get the zip working again.

Zarkie

Scott from Zarkie says they launched the Japanese Komine brand in Australia in May.

“We are still in the processes of determining the best lines to commit to the market so we can bring them in larger volumes and set up partners in all the major cities,” he says.

“We hope to have this done by the end of the year, so for now Komine can only be purchased from us.”

Source: MotorbikeWriter.com

Does Lane Splitting Make Motorcyclists Safer?

(Sponsored post on lane splitting for our North American readers)

Lane-splitting is the act of riding a motorcycle between the lanes of traffic on a freeway or city road. It’s a controversial topic in motorcycle safety, with a variety of opinions and different laws on whether it benefits motorcyclists or puts them in more danger. Many riders advocate for lane-splitting, out of fear that they’ll be sandwiched between two vehicles in a rear-end accident in stop-and-go traffic. They claim it’s safer to travel between lanes, and eases traffic during a busy commute. Those against it argue lane-splitting increases the likelihood of a crash if a driver isn’t paying attention, and doesn’t notice the rider along his or her side.

Motorcycle injury attorneys at Cannon & Dunphy, S.C. claim motorcyclists face a greater risk than any other vehicle on the road. If involved in an accident, riders are are also more likely to suffer serious or catastrophic injuries. Lane-splitting has come up a lot in legislation about motorcycle safety, with a lot of gray area in different parts of the nation. So what is safer, splitting lanes or staying within the lines? A study at UC Berkeley suggests splitting reduces the likelihood a motorcyclist will be hurt in a crash, and the findings could change motorcycle laws across the country.

Lane-Splitting Increases Safety

The study, shared by the American Motorcycle Association, showed that riders who split lanes were significantly less likely to be struck from behind in a crash. Researchers reviewed nearly 6,000 motorcycle-involved collisions between 2012 and 2013. In 997 of those cases, the motorcyclist was splitting lanes at the time of the crash. Overall they found riders who split lanes were 6% less likely to suffer a head injury, 10% less likely to suffer an injury to the torso, and 1.8% less likely to die in a crash.

A few significant findings include:

  • Lane-splitting motorcyclists are less likely to be rear ended than those that don’t lane split, from 2.6% to 4.6%
  • Riders who lane split are 14% more likely to wear a full-face helmet and proper protective gear
  • Lane-splitting is safe if the rider travels at 50 miles per hour or less, and no more than 15 miles per hour above the flow of traffic

Authors of the study cite stop-and-go traffic as the main reason motorcyclists are in danger on the road. The American Motorcycle Association agrees, stating,”reducing a motorcyclist’s exposure to vehicles that are frequently accelerating and decelerating on congested roadways can be one way to reduce rear-end collisions for those most vulnerable in traffic.”Lane filtering lane splitting

Which States Allow Lane-Splitting?

Despite being a common practice on other continents like Australia, Europe and Asia, only California has legalized splitting for motorcyclists. California passed a bill known as AB-51 in 2017, ensuring that the practice is legal across the state.

After the bill was passed, the Governor’s Highway Safety Association released data showing an almost 30% decline in fatal motorcycle accidents since lane-splitting was legalized. The data failed to highlight a specific trend across the United States, with numbers ranging from a 66.7% decrease in Washington D.C. to a 175% increase in fatal accidents in Rhode Island. However, the national average dropped by 8.6%, 30 states saw a general decline in fatal motorcycle accidents, and there were decreases of more than 20% in 14 states.

Other states are working on their own legislation, but no other states have fully legalized lane-splitting like California. Utah has passed some legislation in May 2019, legalizing lane splitting with specific modifications for lane-filtering”. Oregon, Washington, Connecticut, DC, and Maryland are currently considering new lane-splitting legislation as of October 2019. Many states don’t have any specific mention of lane-splitting within their legislation, meaning it’s not necessarily prohibited by law. This list includes Montana, New Mexico, Texas, Oklahoma, Arkansas, Mississippi, Missouri, Kentucky, Ohio, West Virginia, and North Carolina. All other states have laws in place to specifically prohibit lane-splitting for motorcycle riders.

As more information begins to come out about lane splitting safety, it will be interesting to see if more states choose to legalize the practice in hopes of keeping motorcyclists safer.

Source: MotorbikeWriter.com

Rider safety to count in ANCAP ratings

Rider safety will become an important ingredient in cars obtaining star ratings from 2022 under the ANCAP (Australasian New Car Assessment Program) ratings.

That means it will be tougher for cars to obtain a full five stars unless they have active mechanisms to detect and avoid crashes with motorcycles.

They include blind spot alerts, autonomous emergency braking (AEB) and other automated technologies that steer cars away from crashing with riders.

ANCAP chief technical officer Mark Terrell says the 2022 introduction of the “Powered Two Wheeler – PTW” test target will be based on the “MUSE” project (Motorcycle Users Safety Enhancement), undertaken by Euro NCAP. 

The testing used a special motorcycle dummy to simulate various common motorcycle scenarios.

Tougher ANCAP tests

Mark says a similar series of tougher tests for the detection of pedestrians and bicycles has already been incorporated in ANCAP.

“From the start of 2020, the proportion of points for pedestrian and cyclist AEB does increase – making it more likely that manufacturers will need to fit advanced systems to achieve a good star rating,” he says.

“In reality most five-star cars in 2018/19 do have AEB with pedestrian and cyclist detection.
“The actual test scenarios and scoring for 2022 (for motorcycles and scooters) are still under consideration, so I don’t have further detail on these that I can provide at the moment.”

However, we expect they will be similarly tougher.

Hopefully this leads to safer cars on the road and will avoid the SMIDSY (Sorry Mate I Didn’t See You) syndrome.

Source: MotorbikeWriter.com

Joe Rider vests make drivers aware of riders

Riders will be wearing Joe Rider vests during Motorcycle Awareness Month in October to make Sydney drivers aware of how many riders are on the road.

Motorcycle Council of NSW chairman Kevin “Trip” Henry says their road safety campaign will encourage drivers to look out for ‘Joe’ on their way to work.

There will be daily $50 fuel vouchers offered as incentive prize for those who identify the correct location of a Joe Rider through the MCC NSW Facebook page.

Joe Rider competition

The competition will run from 1-4 October 2019 and be backed by a radio advertising campaign on KIIS FM and Edge FM.

All entrants will also go in the draw to win a $500 Red Balloon Getaway voucher sponsored by Shannons Insurance. 

“This competition is a great way to remind drivers to look out for motorcyclists,” Kevin says.

MCC nSW Joe Rider Kevin Trip Henry
Kevin “models” the vest in his driveway

“By being diligent drivers on our roads, lives will be saved.

“Sixty-one percent of multi-vehicle crashes involving a motorcycle are caused by the other driver failing to see or give way to the rider.”

“In motorcycle crashes where the other vehicle was at fault, it was found that 81% were private cars and 9% were a light truck, so if we can get this safety message to car drivers, we can hopefully prevent many accidents.

“Between 2008 and 2016 motorcycle registrations increased by 54%, and car registrations up 21%. There are significantly more motorcycles for drivers to look out for.”Commute traffic lane filtering speed wet NSW sydney police commuting

Regional message

Kevin says they are also targeting the Central West region of NSW this year with a radio campaign leading up to the Two Wheels to Wellington motorcycle ride.

“Regional NSW is prone to motorcycle accidents and fatalities – with 27.5% of all motorcycle fatalities occurring in regional NSW up to August 2019,” he says.

To keep the momentum going throughout the month, MCC of NSW are also sponsoring several motorcycle events. 

They include the Pink Ribbon Ride on 20 October in Western Sydney to raises funds for breast cancer and Breakfast Torque on 27 October at Heathcote.

“Events are a great way for motorcyclists to show their love of riding with friends and family, increases the road users’ awareness of motorcyclists and raise money for worthy causes,” Kevin says.

The event also corresponds with the third annual Ride Your Motorcycle to Work Week from 7-11 October.

Source: MotorbikeWriter.com

Electric cop bike monitors bad drivers

An unmarked electric cop motorcycle is being used as a quiet stealth tool to monitor drivers who fail to see riders on the road in a motorcycle safety program.

In just two weeks, the motorcycle safety project by West Midlands Police, UK, has led to 84 drivers being stopped for endangering riders.

Some are being prosecuted for offences such as dangerous driving and driving without due care and attention.

Others were “warned and educated about their potentially fatal actions behind the wheel”, West Midlands Police tell us.

While riders were also monitored for road offences, only one was charged for dangerous riding.

Video evidence

Plain-clothed police riding the electric motorcycle (probably a Zero SR/F) while wearing a body cam have captured some crazy driving putting them and other riders at risk.

It’s a good example for other motorcycle police around there world to follow to alert drivers of the danders they put riders in as well as making riders more aware of the dangers.

West Midlands Police officer Sergeant Jon Butler says the use of an unmarked electric motorbike allows police to “observe actions on the roads and take action where appropriate”.

“It’s not just about enforcement but educating road users about the need to be aware of who is around them and how their actions can put others at risk.”

Electric cop bikes

West Midlands Police say there are “environment benefits to the (electric) bike”.

They wouldn’t supply a photo of the electric cop bike nor confirm the brand and model, but they say the “range varies, but can get approximately 140 miles (about 250km) a day”.

We suspect it’s a new Zero SR/F based on the dashboard.

Zero SR/F
Zero SR/F dashboard

Zero Motorcycles makes specific electric cop bikes which have been used by many police and emergency services around the world.

BMW scooter for police
Electric BMW police scooter

Police departments in Europe, the United States, Hong Kong and Canada are now using electric motorcycles and scooters from other companies including BMW.

But don’t expect to be pulled up by a silent cop in Australia any time soon.

Australian police evaluated the DS Police motorcycle, but then Zero pulled the plug on our market in 2017 citing unfavourable exchange rates and taxes.

Zero electric DS police motorcycle
Zero electric DS police motorcycle

Zero DS Police Motorcycles come with pursuit emergency lighting and sirens, safety components and specially designed luggage compartments to carry gear, patrol items and emergency medical equipment.

However, the bike used by West Midlands Police was unmarked for obvious stealth reasons.

They say the operation will continue, particularly focussing on collision hotspots, usually near junctions.

“Those stopped will be reminded of the need to be aware of other road users and the risks of being distracted,” police say. 

Source: MotorbikeWriter.com

Pando Moto jeans have style and safety

(Pando Moto jeans review by contributor James Wawne)

Trying to find the right pair of jeans to ride in can be quite difficult, especially if you want to achieve decent levels of safety, comfort, and style.

Pando Moto claim to have the answer to this problem. They produce a range of men and women’s jeans (and other clothing) to meet your needs – unless your waist is above 36 inches (which is as large as their range goes).

The company was founded in Lithuania in 2011 and position themselves as a “premium motorcycle clothing brand”.

Their marketing ‘bumph’ says they “use the very latest in textile technologies with urban riding culture along with European standards EN 17092 (PROTECTION ZONING SYSTEM)”.

So we decided to put a pair of their Karl Desert EL jeans through their paces turning them inside out to look over the key features and wearing them in a number of different scenarios to see how they performed.

Pando Moto jeansPando Moto jeans

The Pando Moto jeans arrived nicely packaged along with the included SAS-TEC® knee and optional hip armour inserts.

The first thing I like to do with any jeans review once I have removed the outer packaging, is to turn the trousers inside out to have a look at what you can see.

Laying the garment on the floor I can immediately recognise the construction format as depicted on their website.Pando Moto jeans

The fabric is Cordura® stretch denim (6.6 fiber) with DuPont™ Kevlar® lining and feels good quality, the cut is sharp and finish of the seams and stitch work is excellent.

The protection pads are quickly and easily installed, secured in tailored compartments which have Velcro strips at the top to ensure that they are secured.Pando Moto jeans

With the protection panels in, these are not the lightest of single-layer jeans in market (for my size (33W34L) came in at about 1200 grams) but they were snug fitting and comfortable and didn’t feel overly heavy when on.

These jeans did not have the ‘cool’ feel of the Saint unbreakable we reviewed, but equally, I didn’t overheat on a middling UK summer’s day (25 Centigrade). Further testing in Brisbane summer temperatures will be interesting (check back for future update in November).

A minor gripe is that there are only four pockets – the small cigarette lighter/gum sub pocket is absent which is unfortunate.

The top of the waist is secured with a standard button/fly combo for quick access and even though these are slim fit the flex of the fabric means that the ankles can readily accommodate riding boots.

The turn-up has a reflective band which is a bonus though you might end up being called a hipster … or worse.Pando Moto jeans

One feature that I found particularly functional was the flexible ‘stretch-panels’ built into the knees and the lower back/waist.

You can really see this contracting/expanding as I straighten and bend my like on the fitting frame (Thanks to Pete at Bike Stop for letting me pose on his rig to demonstrate the performance in various riding positions).Pando Moto jeans

This flex prevents constriction and discomfort that can occur with some jeans which lack this design when in more aggressive riding positions.Pando Moto jeans

The fabrics include 12.5oz Cordura® stretch denim and feature a thick mid-layer made of DuPont™ with Kevlar® yarns lining and reinforced Kevlar® stitches.

The jeans are CE officially approved PPE under EN 17092, level AA (speed 70 km/h) and the site includes quite an entertaining demonstration of its abrasion resistance that mirrors one originally done by Australia’s Draggin’ Jeans.

The look of these jeans, paired with a rather ‘directly captioned’ T give an undeniably cool aesthetic, though that comes at a mid(ish) range price of €249 (about $A405, £220, $US275).

And so, to the closing question then: Do these jeans provide a solution to the problem of finding a blend of safety, comfort and style?

The answer to this has to be a resounding: Yes!

They are pretty good on all dimensions of evaluation  – just so long as you are 27-36 inches around your waist! 

Pando Motor Jean Specs Quick list:Pando Moto jeans

  • Made of 12.5oz Cordura® stretch denim.
  • Lining: thick interlock-knit made of DuPont™ Kevlar®.
  • CE officially approved PPE under EN 17092, level AA (speed 70 km/h).
  • Featuring Kevlar® reinforced stitches.
  • Equipped with stretch panels on knees and back.
  • Reflective cuffs for safety ride.
  • Knee armour and inner hip armour slots.
  • SAS-TEC® CE approved (EN1621-1:2012) knee armour. (included)
  • Optional: SAS-TEC Hips – EN1621-2 approved. (not included)
  • Colour: Light blue, hand-made aged style.
  • Made in Europe.

Click here for more information on CE approved clothing.

Source: MotorbikeWriter.com

Automatic emergency call technology for bikes

Motorcycles should be fitted with automatic crash call technology to reduce emergency response times which are more lethal in Australia’s rural and remote areas, an Austroads report has found.

The Guide to Road Safety Part 5: Road Safety for Rural and Remote Areas also suggests compulsory first-aid training for learners and those renewing licences in rural and remote areas.

It points out that motorcyclist deaths have remained stable in major cities over the past decade, but increased in regional and remote Australia by up to almost 50% in recent years.

Click there for more details.

Slow response timesOutback adventure Royal Flying Doctor Service calls

Delays in reaching crash victims in rural and remote areas include difficulties in locating crash sites and a lack of mobile phone reception, according to emergency organisations and motorcycle rider groups.

The report found the average time for a first responder to arrive at a motorcycle crash in rural and remote areas was 55 minutes compared with 18 minutes in urban areas.

Remote crash victims also took an average of 11.6 hours to arrive at a hospital emergency department compared with 59 minutes in urban areas.

“Retrieval time subsequently impacts on crash outcomes with delays until discovery or delays in accessing the trauma system increasing the risk of mortality following major trauma,” the repot finds.

The probability of a rider dying increased by 2.7% for every 100km from a hospital.

It’s a worrying statistic for adventure riders heading out into the Outback.

As a more rural example, the report says more than half of all Victorian motorcycle crashes occur in the Gippsland region where ambulance response times are 29.9 minutes compared with metropolitan times of 12.7-17.2 minutes.

South Australia and NSW are the only states with post-crash emergency response in their road safety strategy and action plans.

Auto emergency call tech

Austroads claims automatic collision notification (ACN) would reduce crash fatalities by up to 3.8% and calls for the systems in all vehicles, including motorcycles.

These emergency call systems have been available in cars for some time and are now mandated throughout Europe with motorcycles expected to be included in the future.

BMW Motorrad is the first motorcycle company to offer an SOS button in Europe.

BMW SOS button motorrad win mandated calls
BMW SOS button

It is not yet available in Australia because of an eCall hardware update and the lack of a nationwide rollout.

The button alerts the emergency services and provides GPS co-ordinates of the rider’s position.

It is also connected to various sensors on the bike to detect whether the rider has crashed.

However, the report notes that problem with these systems in Australia is the lack of mobile phone coverage in rural areas.

Riders can also use an EPIRBdownload an emergency app or try this Aussie-made Sentinel device.

Austroads suggests compulsory first-aid education for all motorists, especially learner riders and those renewing licences in rural and remote areas.

However, Queensland has already rejected this proposal because of the difficulties of supplying training in regional communities.

Source: MotorbikeWriter.com