Tag Archives: Bike accessories

Alarmbox may negate need for lock

The Alarmbox aftermarket motion sensor alarm could negate your need to physically lock your motorcycle with a chain or disc lock.

Many aftermarket disc locks now have similar sensors.

However, the Alarmbox is convenient as you may not need to use a physical locking system.

It is similar to the motion sensors built into the security systems on some expensive motorcycles such as Harley-Davidson models.

AlarmboxAlarmbox motorcycle motion sensor alarm

Alarmbox is made by German lock manufacturer Abus.

The rectangular unit has a three-dimensional motion sensor and can be fitted permanently to your motorcycle, or any other valuable item.

It should be positioned under the seat or somewhere out of sight, but still accessible as it is armed and disarmed by inserting a key.

If a thief moves your bike, the alarm starts quietly and builds within 15 seconds to very loud (100dB) unless the thief stops moving the bike.

This guards against disturbing the neighbourhood with a loud alarm if the bike is accidentally bumped such as when someone is parking next to you.

It is powered by a replaceable CR2 lithium battery.

The device comes in black or blue, weighs 370g and its dimensions are 18x56x84mm, so it’s about the same weight and size as a small container of butter.

The Abus Alarmbox is not yet available, but when it is, it will be priced at about $A90.

Theft warningPolice survey on motorcycle thefts

We would advise riders not rely solely on a loud alarm to save their bike as we have heard car alarms before that everybody just ignores!

Queensland Police Service statistics show that more than 95% of bikes stolen from the Brisbane area did not have any form of additional security and just under half had some type of cover over them.

We also recommend using as much security as you can, such as physical locks and chains, to avoid the rampant rise of motorcycle theft.

Click here for more tips on securing your motorcycle.

Source: MotorbikeWriter.com

Never lose your motorcycle keys

If you’ve ever lost your motorcycle key and don’t have a back-up, you’ll know how expensive modern keys can be to replace.

Many modern motorcycle keys now have a security code for the ignition immobiliser. It can be etched on the key itself, written down on purchase documentation or owner’s manual, stamped on a card or engraved on a metal tab attached to the key.

Security code

If you lose your keys and have the security code, some bikes have an emergency contingency for starting your bike, usually using a series of controls on the indicators or other controls.

A new key could only cost about $50. However, the security fob can cost several hundred dollars.

Harley-Davidson CVO Pro Street Breakout please reduceHarley remote key fob

But if you lose the keys and your security code, you could face thousands of dollars to get a new ignition security system and sometimes the ECU as well!

If you are buying brand new, you will get two sets of keys and/or fobs plus a pin code.

Immediately put your pin code in your phone along with your VIN (vehicle identification number) and keep a copy with your spare key at home in a safe place.

Be aware that thieves have been known to break into houses just to steal vehicle keys.

If you buy a bike second-hand, always ensure you get the back-up set of keys. If they say they lost them, be suspicious as they could be planning to visit your place and reclaim their bike in the middle of the night!

Motorcycle theft hot spots keyring thieves miserly CCTV black friday thefts stolen boomBuy your “warning” keyring now at the Motorbike Writer online shop for just $6.

No immobiliser

Older bikes without immobilisers will have a key code on the ignition cylinder which you will have to pry out. If you can’t remove the ignition cylinder, try the seat lock, fuel tank or steering lock as they should be the same.

A locksmith should be able to replicate a key based on that code for a reasonably small fee.

If you can’t find the code or it’s rusted off, call an automotive locksmith.

They may still be able to help you based on the model details, so long as you have proof of ownership.

If you have a pre-immobiliser bike and only one key, it’s a good idea to get a spare cut from that key. Again, it’s cheap insurance.

Keep it in a safe place at home and maybe get a third key that you keep in your wallet or jacket.

Lost keys

Insert Before Flight keyring photosBuy your “warning” keyring now at the Motorbike Writer online shop for just $6

The best way to avoid any of the above costly problems is to never lose your keys.

Many riders, including myself, forget to take their keys out of the bike when they park.

That’s because there is so much to do when you stop: Kill switch, side stand, glasses, helmet, gloves, etc. It’s easy to forget to take out your key.

Thieves have been known to steal motorcycles with the keys still in them.

It’s not only dumb to leave your keys in your bike, but also illegal in some states with fines up to more than $100. I’ve seen cops fining riders who are more than 3m from their bike with the key still in it!

So get into a routine when you get off your bike: take out the key first.

Also, put your key in exactly the same pocket of your jacket or pants every time you get off the bike. Make sure it’s a secure pocket with a zip.

Keep a spare key with your vehicle ownership records at home in a safe place. Maybe keep a third set in another place or in your wallet or jacket. Never “hide” a spare key on your bike.

Thieves are not that stupid. They will look under the seat and fenders, etc for zip-tied spare keys.

You can also buy a “tile” which goes on your keyring and pairs via Bluetooth to your phone to show you where your keys are.

They cost from about $20 to about $100. Obviously, the more you pay, the more reliable they are.

Most are made of plastic so they won’t scratch your bike. However, you can get keyrings with covers to protect your bike.KodaKey keyring

There are now more hi-tech options that will even track your bike on an app so you know where you parked it in case you forgot or it’s stolen!

But make sure it’s waterproof like the BlaqWold key tracker which costs $24.99. You can use it for a lot of other uses, as well.

As we said, thieves usually aren’t stupid and will identify these trackers and remove them, but at least you will be notified if your bike has been stolen.

Damaged keys

Sometimes keys can get bent or damaged and won’t turn in the ignition.

A locksmith may be able to fix that or replicate the key.

But first try white graphite powder in the ignition barrel. 

Source: MotorbikeWriter.com

Harley unleashes 131 Screamin’ cubes

Harley-Davidson’s Screamin’ Eagles factory customs department has unleashed its biggest engine yet, the 131-cube (2147cc) crate motor.

The Screamin’ Eagle Milwaukee Eight 131 Crate Engine features the same 114mm (4.5”) stroke as the 114 Milwaukee Eight, but has been bored out from 101mm (4”) to 109mm (4.31”).

Harley claims it makes 90kW (121hp) of power and 177Nm (131ft-lb) of torque when matched to the Screamin’ Eagle Street Cannon mufflers. It also requires an ECM calibration and Screamin’ Eagle Pro Street Tuner.

That’s a lot of grunt, but still not comparable to the Triumph Rocket 3 which last year went from 2.3 litres to 2.5 litres with 123kW (165hp) at 6000rpm, up 11% over the previous model, and 220Nm (163ft/lb) of peak torque at 4000rpm.

That makes the Trumpy the biggest torque monster of any production bike in the world.

2019 Triumph Rocket 3 TFC torque monster2019 Triumph Rocket 3 TFC

Price and availability

The 131-cube monster, as well as the recently introduced Screamin’ Eagle Milwaukee-Eight 107″/ 114″ and 128″/131” Stage IV Kits, are not in the Aussie 2020 HD catalogue.

However, Harley-Davidson Australia spokesman Keith Waddell says they are “very excited to have these performance parts in ANZ and will provide an update when these parts are available for sale”.

We believe the parts are being homologated.

In the US, the price is $US6195 ($A9000) for the 131 oil-cooled version and $US6395 ($A9360) for the twin-cooled motor.

You could expect to pay around $A10,000 for the Screamin’ Eagle 131 crate motor, given a CVO 117 motor costs about $A7400.

Harley-Davidson CVO Street Glide Limited Road Glide Boom Box rain wet infotainment audio technoCVO Street Glide Limited wth 117 plant

Screamin’ Eagle 131

Harley’s Screamin’ Eagle Milwaukee Eight 131 Crate Engine bolts straight into 2017 and later Touring models running an oil-cooled or twin-cooled Milwaukee Eight engine.

With a compression ratio of 10:7:1, you will have to be careful on downshifts not to lock the rear wheel.

You will also be paying more to fuel up with high-flow fuel injectors that guzzle fuel at a rate of 5.5-grams a second.

There are bigger accessory motors available for Harley’s and other big twins, but Harley-Davidson Product Manager James Crean says their engine’s raw grunt is matched by factory-made reliability and a 12-month or 24-month factory limited warranty.

It comes in black/chrome or black/gloss black with 131 Stage IV badging on the cylinder heads and timer cover.

Source: MotorbikeWriter.com

Ducati racing memorabilia now on sale

For the Ducatisti tragic who has everything, how about this collection of Ducati racing memorabilia from MotoGP and World Superbikes that is now on sale.

The first load of limited-edition gear includes crankshafts, camshafts, pistons and con-rods with more being added over time.

Each item of memorabilia comes in a smartly styled plexiglass display case together with a certificate of authenticity, a technical description and info on the relative rider and world championship season.

All are personally certified by Ducati Corse boss Gigi Dall’Igna and Ducati CEO Claudio Domenicali who was recently announced as the as the new President of the Italian Motor Valley Association. Motor Valley is the area of Italy that includes most of the auto makers, 15 auto museums and several race and testing tracks.

memorabilia
Claudio with a Panigale V4 R

Unfortunately, Ducati memorabilia items can only be purchased at the Ducati Store in Borgo Panigale, Bologna, and at selected Ducati dealerships.

However, from next year you can order online at www.ducati.com.

Source: MotorbikeWriter.com

BrakebuTT links front and back brakes

If you are a convert to linked brakes or hand-operated rear brakes, the Aussie-designed BrakeBuTT invention could be what you are looking for.

Inventor Jay Thompson, 54, of Perth, says he came up with the idea of an affordable retrofit linked-brake system after an embarrassing crash.

“Showing off while riding with the young boys about 4-5 years ago, wheel standing of course in Lancelin my KTM 530EXC bit in and not covering the rear foot brake I embarrassingly flipped it, dislocating my shoulder and then spent three months off the bike,” he says.

BrakeBuTT
Jay explains BrakeBuTT

More than a quarter of a century ago, five-time GP champ Mick Doohan used a thumb-operated rear brake after shattering his right leg in a crash.

Today many racers use the device so they can dangle their right leg coming into corners.

BrakeBuTT links brakesBrakeBuTT

However, Jay’s invention isn’t an extra hand-operated rear brake, but a linked system that works off the existing front brake lever.

Jay says it is the world’s first dual brake assist accessory for motorcycles and costs less than $A600.

His Electronic Braking Intelligence software applies the rear brake bias at a rate controlled by a dial on the unit on the handlebar.

BrakeBuTT
Dial ion bias

He says the brake is progressive and proportionate to the pressure applied to the front brake lever.

The pad on the lever is a force sensitive resistor and can be in varying sizes depending on whether you use one, two or all four fingers for braking. You can also choose to avoid the pad and brake with only the front.

Jay says it suits all road, off-road and track riding conditions.

“This System is cutting-edge new tech innovation,” he says.

“Zero to full rear brake in less than half a second — faster than the average foot response time, even without muddy wet soggy boots.

“Without this system is probably why most riders fall off.

“Coordinating both front and rear automatically prevents rider error and miscalculation.”BrakeBuTT

Testing

Jay’s BrakeBuTT is being tested on 10 different bikes including four-time Australian champions in three different disciplines.

BrakeBuTT will be available to the public in February/March 2020.

Jay provided a home video for our viewing only and not for the public.

BrakeBuTT
No dive under heavy braking (still from video)

It shows a sport bike stopping using the BrakeBuTT only in just 10m from 64km/h with the bike level and not diving in the front.

Brake pressure is controlled by a unit smaller than a cigarette packet and weighing less than 150g.

It provides more than 1000psi of hydraulic pressure and can be mounted anywhere on the bike.BrakeBuTT

Source: MotorbikeWriter.com

SP Connect challenges Quad Lock phone mount

Austrian SP Connect is taking on Australian-designed Quad Lock in the race for your handlebar phone mount.

Handlebar phone mounts have grown in popularity as more riders use their phones for GPS, music and communication.

Some motorcycle instruments also now connect directly with your phone and, in future, they may be replaced by your phone.

Mount up

X2 phone mount
X2 phone mount charges your phone while riding

There is now a wide variety of mounts on offer. Some are not very secure while some others, such as the RAM mounts, may be secure, but they are expensive and large, clunky, ugly units.

The only one we know that also allows your phone to charge is the X2 (pictured above) which we sell in our online shop for $35.

However, the Quad Lock, designed by Chris Peters of Melbourne, has emerged as the leader with its small size, secure fit and ability to quickly adjust from landscape to vertical at the press of a button.

Quad Lock mobile phone mount car app
Quad Lock

Quad Lock costs about $85 for the handlebar mount and phone case, while the Austrian SP Connect Moto Mount Pro kit costs $99.95 – $129.95 for a bundle, depending on your phone.

SP Connect Moto Mount Pro kit
SP Connect Moto bundle

While the Quad Lock is largely hard plastic, the SP Gadgets mount is CNC-machined, aircraft-grade alloy. It feels a little heavier and therefore should be more secure.

However, we have never had any problems with the Quad Lock coming loose and falling off, even over off-road courses.

We have also noticed that vibration is similarly minimal on both.

Like the Quad Lock, you can get an extension arm that makes positioning your phone on your handlebars more versatile.

Easy connectSP Connect Moto Mount Pro kit

Both mounts can swivel from horizontal to vertical, but the SP Connect requires you to use a tool to turn the locking mechanism in the back of the phone case first.

That means you can’t do it on the fly. You have to remove the phone from the mount, then use the special tool to change it, then relocate the phone.

While some people are happy having the phone either landscape or portrait, I like to be able to swivel from one to the other: horizontal because it offers a nicer, lower profile on the bars and vertical when I am following a map.

The only advantage of the SP Connect is that you can also use the special tool as a table rest so you can conduct Face Time calls without having to hold the phone at an angle.

While the Quad Lock videos show people quickly fitting the phone, they can actually be quite fiddly to get on because you have to attach it at exactly a 45-degree angle.

SP Connect connects easily by placing it at a right angle and swivelling it 90 degrees into position.

Both have bundles that come with rubber mounts for all sizes of motorcycle handlebars, bolts and mirrors, as well as on bicycles.

Bundles also come with clear plastic rain covers that are touch sensitive.

SP Connect Moto Mount Pro kit
Rain cover

However, I’ve never needed to use one even in pouring rain as recent iPhones are basically rain proof. However, I have tested them both for touch sensitivity with the rain cover on and they work fine.

SP Connect wins hands down on looks and they have also just released a chrome-plated version!

It is available for most Apple, Samsung and Huawei devices, but if you have another phone or want to keep your own case, there is a universal option.SP Connect Moto Mount Pro kit

Source: MotorbikeWriter.com

Everything You Need To Ride a Sport Bike

(Sponsored post)

So, you want to ride a sport bike. Unlike cruisers, sport bikes are made for rapid acceleration. They’re fun and exciting to drive, but they can also be challenging to ride at first. To make sure you stay safe, comfortable and in control, here’s a list of everything you need to get started, from sport bike wheel accessories to protective gear.

Wheel Spacers

When it comes to sport bike accessories, wheel spacers are often overlooked. However, they can make changing your wheels a quicker and easier process. Look for push-in interlocking wheel spacers that won’t move around.

Multi Tool Kit

Hauling your entire motorcycle kit is impractical when you’re riding a sport bike. After all, you don’t have a lot of space to store things and you don’t want to add too much weight to your ride. Pocket-sized multi tool kits can help you stay prepared without bulking you up or weighing you down. Look for tool kits that include basic open-ended wrenches, socket driver, spoke wrenches and screwdrivers.

Helmet

When riding a sport bike, it’s imperative to wear a quality helmet. Choose a full-face option that offers maximum protection. You may also want to select a helmet with Bluetooth integration technology. Good sport bike helmets are designed to be aerodynamic, comfortable and secure. This is an area where splurging a little is worth it to ensure your safety and your confidence on your bike.

Leather Suit

Sport bike riders don’t wear leather suits just to look cool. When you’re traveling at high speeds, loose clothing can cause significant drag. A close-fitting suit can help you remain aerodynamic. It also blocks the wind and keeps you comfortable and dry in all types of weather. Leather suits also offer superior skid protection if you happen to lose control of your bike.

Heated Gloves

If you do any fast riding in cold weather, your hands will feel the chill first. Heated gloves can keep your hands warm and dry so you can maintain optimum control of your bike in cold weather.

Boots 

A good pair of durable boots is a must-have for any sport bike rider. Look for a pair with straps or buckles instead of laces. You don’t want to risk having your laces come undone and get caught on your bike during your ride. If you plan to do any cold-weather riding, you should purchase a pair of boots with insulation so your toes don’t freeze.

Rim Strips

Although they don’t do much to enhance the safety or performance of your bike, rim strips can make your bike flashier. They are sport bike wheel accessories that have a huge impact on how you look. For the most notable effect, choose rim strips that are brightly colored and complement your bike’s paint job. Rim strips are easy to install and can be removed if you grow tired of them or want to switch colors.

Nothing compares to the speed and freedom a sport bike can offer. With the proper accessories and protective gear, you’ll be ready to confidently ride your sport bike in no time.

Source: MotorbikeWriter.com

Which Motorbike Parts Need Replacing Frequently?

(Contributed post on motorbike parts)

Motorbikes usually last for approximately 12 to 15 years, provided you take care of them throughout their lifetime. It shouldn’t meet with an accident or take a nasty fall. High-end bikes can last longer if you spend enough time and money on their maintenance and upkeep. And one of the ways to keep the performance of the bike going is by replacing a few parts now and then.

Checking motorbike parts

If you want to increase the lifespan of your motorbike, you should check some of the crucial parts frequently. Some of these parts may have to be replaced. Don’t hesitate to replace them as soon as possible. This will ensure that the bike maintains its performance until it is finally time to replace it entirely. So, what are the parts that you need to replace frequently? Let’s find out.

1) Brake pads

Squeezing the brake lever triggers several events in the brake system. The brake pads pass the rotors to forcefully stop the bike. This causes the brake pad to deteriorate over time. Regular wear and tear corrode the brake pads quickly. So, you should always change the brake pads frequently.

There is another advantage of maintaining your bike. You will get a better resale value if you want to buy a new motorcycle. If your bike is in good shape with new brake pads, get a quick online quotation of its resale value. Price My Car, for one, is a reliable site that will provide instant quotes for your bike.

2) Battery

Motorbikes run on battery and gas. Most motorbikes come with maintenance-free batteries. However, they also have a lifespan. You cannot expect the battery to last for a lifetime. These batteries have a shelf life of approximately two years. You need to replace them once they cross that line. You wouldn’t want to be stranded on the highway because the battery died on you suddenly.

3) Fork oil

The fork is a crucial part of the bike connecting the axle and front wheel to the mainframe. It consists of two tubes between which the fork is sealed completely. The fork oil doesn’t allow the bike to get affected by uneven or bumpy roads. In fact, it is responsible for lubricating different parts of the bike when you are riding it. The first symptom of replacing the fork oil is when you see oil leaking from the tubes of the mainframe. Car dealers advise riders to replace the fork oil during the annual maintenance of their bike.

4) Bike chain, belts, and driveshafts

These are the most durable parts of a motorbike. They usually have a lifespan of 15,000 to 30,000 miles. But you should always check every now and then if the bike chain is slack or not. It should be well-oiled and clean. The mechanic should replace it if it becomes slack.

If you consider your bike as your baby, you shouldn’t think twice before replacing these parts. They will improve the bike’s performance significantly once you install the new items.

Source: MotorbikeWriter.com

Harley pulls out of Walcha Motorcycle Festival

Harley-Davidson has pulled out of the Walcha Motorcycle Festival due to the current bushfire threat, but the event will still go on from Friday (15-17 November 2019).

Walcha Royal Cafe owner Toni Keable says HOG members from Perth have already arrived and many more have said they are still coming.

“There’s no change at Walcha. We’re still going ahead with the festival,” she says.

The festival was put together by the town after the last-minute cancellation of the Freak Show Festival of Motorcycles and national Harley Owners Group (HOG) rally when the organisers went into liquidation.

Earlier this week Walcha Tourism said the event would go ahead despite the current bushfire situation.

Harley pulls out of festival

However, late this afternoon Harley-Davidson Australia issued this statement:

The bushfire situation across New South Wales and the progressive dangers across the state has meant that Harley-Davidson Australia has made the difficult decision not to attend the Walcha Motorcycle Weekend this coming weekend, 15-17th November.

Harley-Davison Australia have been monitoring the bushfire situation and have been in ongoing contact with the Walcha Council and NSW Rural Fire Service to understand if it is safe for Harley-Davidson and our H.O.G. members to attend.  

Since Tuesday 12th November 2019, the NSW Premier has declared a State of Emergency with dangerous conditions across New South Wales, advising motorists to delay all non-essential travel with many highways and motorways closed.

All H.O.G. members planning to attend the event have been contacted.

From everyone at Harley-Davidson Australia, we ask all riders to remain safe and alert.

Toni believes the statement is a “safety precaution”.

“It is probably for insurance purposes not to leave themselves in a position of danger if something happens,” she says.

“We’ve had people arriving all week. We’ve also had people ring and say ‘we’re coming, we’ll get there, we will find a way’.

“Some of the roads are closed but some are still open. Everywhere there is a closed road, there is an alternative route.”

Riders should check www.livetraffic.com.au and www.google.com/maps for road closures before attempting to ride to Walcha.

Bushfires Harley Softail

“We met some Harley riders who said they had to ride 400km further than they expected.

“If they had rung us we could have told them about a safe shortcut.”

The Royal Cafe number is (02) 6777 1117.

Oxley closed

Just abit of the Oxley this morning, don’t see it being open this week.

Publiée par Gingers Creek sur Lundi 11 novembre 2019

Meanwhile, the main attraction in getting to Walcha is the Oxley Highway which remains closed, not by fires but the high risk from falling burnt limbs after fires earlier this week.

Official advice is that motorists should avoid unnecessary travel and be prepared for conditions to change quickly and roads to close suddenly.

Riders should make sure they have water, food, supplies and a full tank of fuel. Make sure your mobile phone is fully charged before you set out.

If you’re already travelling when a bush fire starts, follow the directions of emergency services personnel.

You can check online here for bushfires in Queensland.

In NSW, check the RFS website, SES website, Fire Update Site, or download the ‘Fires Near Me’ app.

Walcha Motorcycle Weekend highlights

Harley was planning to bring its truck of merchandise and demo bikes including a LiveWire electric motorcycle for “demo rides” on their Jumpstart Experience.

demo ride online walcha
Harley offers non-licensed people a demo ride with their JumpStart

However, there is still a host of other entertainment across the three days, including stunt shows, a rodeo, guided rides, Harley demo rides, a Steampunk motorcycle gallery, markets, music, food stalls, a billy cart derby show and shine and more.

Click here for a full schedule of events.

All accommodation in town is fully booked so Council has organised for camping at the Oxley Sportsground.

Local not-for-profit groups will provide basic catering onsite and clean-up services.

To read all about the Freak Show debacle check the articles listed below.

Source: MotorbikeWriter.com

Self-loading motorcycle ramp

Loading a motorcycle on to a trailer or vehicle can lead to disasters and can take a lot of muscle and skill to get it right.

However, Dutch company Porteos takes all the worry, muscle and skill out of the process.

They are updating their self-loading motorcycle ramp with a lighter telescopic ramp that can be easily fitted to most utilities and vans.

It features a telescopic ramp that slides out and down and will lift any size motorcycle up to 400kg using a motorised pulley system.

Easy loading

Porteos have been making the self-loading ramps in Europe out of steel but have now started an Indiegogo crowd-funding campaign to make their new lightweight ramp.

It is made of aerospace-grade aluminium which is lighter, but also more robust.

The Porteos ramp includes rollers so the 60kg device can be moved around easier and can be moved from vehicle to vehicle more easily.loading motorcycle trailer

The new Porteos motorcycle ramp has a “power tilt” feature that allows it to fit the bike quickly in tighter places.

It is not cheap starting at $2652 but crowd-funding supporters can get it for $2074. (We recommend caution on supporting any crowd-funding camapaign as prodjuct delivery and refunds are not guaranteed.)

Porteos says they will ship their new ramp worldwide and they estimate it will cost about $500 to get one to Australia.

Source: MotorbikeWriter.com