Tag Archives: phone mount

Q-Mount Pro Charging Phone Mount | Gear Review

Q-Mount Pro wireless charging phone mount review

For riders who prefer to use their smartphones for navigation, music, and other functions, mounting and charging while on the go are primary concerns. For obvious reasons, mounts used on motorcycles must be extra secure, as dropping the phone at speed could prove catastrophic. Likewise, wireless charging is a far more convenient option than plugging in, especially in inclement weather.

The Q-Mount Pro combines solid mounting and wireless charging into one IP67-rated weatherproof package, which boasts true one-handed operation for both locking and releasing the phone. Squeezing the two “quick access switches” on the sides of the mount chassis extends four stainless-steel expansion arms outward to approximately 7.25 inches diagonally, enough to easily hold a typical smartphone with a 6.5-inch screen and then some. My test subject was an Apple iPhone 12 Pro Max inside an Otterbox Defender case, which is about the largest rig you can fit within the Q-Mount Pro.

Q-Mount Pro wireless charging phone mount review

Once the phone is placed flat on the mount’s soft silicon mats, it depresses the center button which actuates a spring mechanism, snapping the expansion arms inward to pull tight onto the four corners of the phone. The phone is now firmly locked into position until the quick access switches are pressed in again to release it. The expansion arms have oversized plastic tips that accommodate phone cases up to approximately 0.5 inch thick like the aforementioned Otterbox, so there’s no need to remove the phone from the protective case to mount it.

Check out more of Rider’s motorcycle gear reviews

The device features a waterproof rocker switch on its rear side that allows the user to toggle between off, Qi wireless charging at 15 watts max, and USB 3.0 charging via a waterproof covered port at the bottom of the Q-Mount’s chassis. USB output is 5V/3A, 9V/2A, or 12V/1.5A. A power indicator LED on its left side lets you know if there’s juice available.

Installation is very simple using the included handlebar mount, which utilizes a ball end to interface with the phone mount chassis, allowing a wide range of adjustment. Once locked in place, the setup is solid and simple to operate with one hand. A mirror mount is also included for even more placement options, though we were happy with mounting to the handlebar.

Wiring is direct to the bike’s 12-volt DC power source, using the included hardwired harness.  

Consult Q-Mount’s website for a comprehensive list of which phones are compatible with Qi wireless charging; nearly every major brand of phone is covered.

In short, the Q-Mount Pro is a functional, inexpensive device that enhances convenience for mounting and charging a smartphone on the fly. MSRP is $45, which includes free shipping.

For more information, visit q-mount.com.

Check out more product reviews and articles on Moshe K. Levy (aka Moto Mouth Moshe) on his website and YouTube channel.

The post Q-Mount Pro Charging Phone Mount | Gear Review first appeared on Rider Magazine.
Source: RiderMagazine.com

SP Connect challenges Quad Lock phone mount

Austrian SP Connect is taking on Australian-designed Quad Lock in the race for your handlebar phone mount.

Handlebar phone mounts have grown in popularity as more riders use their phones for GPS, music and communication.

Some motorcycle instruments also now connect directly with your phone and, in future, they may be replaced by your phone.

Mount up

X2 phone mount
X2 phone mount charges your phone while riding

There is now a wide variety of mounts on offer. Some are not very secure while some others, such as the RAM mounts, may be secure, but they are expensive and large, clunky, ugly units.

The only one we know that also allows your phone to charge is the X2 (pictured above) which we sell in our online shop for $35.

However, the Quad Lock, designed by Chris Peters of Melbourne, has emerged as the leader with its small size, secure fit and ability to quickly adjust from landscape to vertical at the press of a button.

Quad Lock mobile phone mount car app
Quad Lock

Quad Lock costs about $85 for the handlebar mount and phone case, while the Austrian SP Connect Moto Mount Pro kit costs $99.95 – $129.95 for a bundle, depending on your phone.

SP Connect Moto Mount Pro kit
SP Connect Moto bundle

While the Quad Lock is largely hard plastic, the SP Gadgets mount is CNC-machined, aircraft-grade alloy. It feels a little heavier and therefore should be more secure.

However, we have never had any problems with the Quad Lock coming loose and falling off, even over off-road courses.

We have also noticed that vibration is similarly minimal on both.

Like the Quad Lock, you can get an extension arm that makes positioning your phone on your handlebars more versatile.

Easy connectSP Connect Moto Mount Pro kit

Both mounts can swivel from horizontal to vertical, but the SP Connect requires you to use a tool to turn the locking mechanism in the back of the phone case first.

That means you can’t do it on the fly. You have to remove the phone from the mount, then use the special tool to change it, then relocate the phone.

While some people are happy having the phone either landscape or portrait, I like to be able to swivel from one to the other: horizontal because it offers a nicer, lower profile on the bars and vertical when I am following a map.

The only advantage of the SP Connect is that you can also use the special tool as a table rest so you can conduct Face Time calls without having to hold the phone at an angle.

While the Quad Lock videos show people quickly fitting the phone, they can actually be quite fiddly to get on because you have to attach it at exactly a 45-degree angle.

SP Connect connects easily by placing it at a right angle and swivelling it 90 degrees into position.

Both have bundles that come with rubber mounts for all sizes of motorcycle handlebars, bolts and mirrors, as well as on bicycles.

Bundles also come with clear plastic rain covers that are touch sensitive.

SP Connect Moto Mount Pro kit
Rain cover

However, I’ve never needed to use one even in pouring rain as recent iPhones are basically rain proof. However, I have tested them both for touch sensitivity with the rain cover on and they work fine.

SP Connect wins hands down on looks and they have also just released a chrome-plated version!

It is available for most Apple, Samsung and Huawei devices, but if you have another phone or want to keep your own case, there is a universal option.SP Connect Moto Mount Pro kit

Source: MotorbikeWriter.com