Tag Archives: kickstarter

Warning over crowd funded bike products

We warned riders about supporting the crowd-funding campaign for RiderBuds earphones after customers had still not received products almost a year after the promised delivery date.

However, two customers in Holland and Canada have now contacted us to say they have finally received their RiderBuds and are happy with their performance.

We are satisfied they are legitimate customers and not linked with the RiderBuds company. 

Originally company founder Maurice Dziubinski corresponded with us and even promised a review set. However, over the past year he has stopped replying to our frequent emails requesting updates on delivery.

That, plus the many comments from disappointed customers, made us understandably wary of this product. Riderbuds earphones

Dutch customer Stephan says he ordered them on 22 February 2019 and was hoping they would be shipped during May 2019 as promised in the Indiegogo campaign launched in November 2018.

I eventually received the RiderBuds on 25 March 2020, which is 13 months after I ordered them and 10 months late on their initial planning,” he says.

“I have to say, after they failed to deliver in May and the updates we received got less frequent, I started thinking I might have contributed to another scam on Indiegogo.

When Maurice told us that 84% of top crowd funding projects are shipped late – often as much as one year late – I started to suspect things were not as they seemed. At that point I had completely given up on the product,” says Stephan who was caught by a crowd-funding product scam.

“I started to check the updates once every few months and when COVID-19 hit around the end of 2019 I thought that he had found the perfect excuse to delay delivery even further. Fortunately I was wrong and I actually received the product, which turns out to be great!”

Stephan displays his RiderBuds in front of the computer screen showing our original articleStephan displays his RiderBuds in front of the computer screen showing our original article

He says he has used in-helmet speakers prior before that were “terrible”.

“I have a full face helmet and they do not have cut-outs for in helmet speakers, so my ears got sore,” he says.

“I tried using in-ear earbuds and they were even worse; dislodging, discomfort. So when I spotted RiderBuds I was sold.”

Our original article said the earphones ($US199, $A275, €175, £150) were claimed to be the smallest, softest, toughest, quietest and most secure earphones for riders.

They claimed they can’t be dislodged when putting on a helmet or pulling it off like most other earphones.,

The cable connections are also supposed to be tougher and won’t fray or break with rough use; even if you pull them out by the cable.

Crowd funding warning

Like other previews of prospective motorcycle products, we included a warning to our readers that supporting a crowd-funding campaign for a product not yet manufactured is not without risk.

Kickstarter and Indiegogo do not offer refunds to supporters who pledge money for products that either fail to reach their goal or do reach their goal and then fail through fraud.

The latter was the case with the infamous Skully head-up display helmet where the founders blew $US2.4m in supporters’ money on fast cars and women!

Unless a crowd-funding campaign specifically mentions a refund, supporters are advised they will have to contact the campaigner to get their money back.

They are also notoriously late with delivery as has been experienced with RiderBuds.

Maurice told us on the launch of his campaign that he spent hundreds of hours testing the earphones, talked with more than 1000 riders around the world and had a few dozen Beta testers, including in Australia and New Zealand.

His crowd-funding campaign was fully subscribed in three hours, 200% in 12 hours and raised $A164,255 from 688 backers within a month.

The campaign page is still live and has now amassed more than $A220,000 from 885 backers.

We are surprised Indiegogo did not suspend the page and stop taking money after many complaints on the page from potential customers.

One comment came from a customer who suggested Maurice had moved from Hong Kong to Vietnam because of the COVID-19 outbreak and was getting the production sorted out.

The comments have now been deleted and replaced by “testimonials”.

Source: MotorbikeWriter.com

Warning on potential RiderBuds fraud

Riders are warned not to support the crowd-funding campaign for RiderBuds earphones nor to buy them because of a suspected fraud.

The campaign launched in November 2018 but the earphones have still not been delivered to many customers.

We published an article that month ($US199, $A275, €175, £150) that said they were claimed to be the smallest, softest, toughest, quietest and most secure earphones for riders.

Like other previews of prospective motorcycle products, we included a warning to our readers that supporting a crowd-funding campaign for a product not yet manufactured is not without risk.

Kickstarter and Indiegogo do not offer refunds to supporters who pledge money for products that either fail to reach their goal or do reach their goal and then fail through fraud.

The latter was the case with the infamous Skully head-up display helmet where the founders blew $US2.4m in supporters’ money on fast cars and women!

Unless a crowd-funding campaign specifically mentions a refund, supporters are advised they will have to contact the campaigner to get their money back.

RiderBuds ‘fraud’ warning

Riderbuds earphones

In the case of RiderBuds, many customers have complained on the campaign page that the product has still not delivered despite the delivery deadline of May 2019.

They also claim Indiegogo and the founder are not responding to emails.

We contacted Indiegogo and RiderBuds founder Maurice Dziubinski for comment and but have also received no reply.

Maurice told us on the launch of the campaign he spent hundreds of hours testing the earphones, talked with more than 1000 riders around the world and had a few dozen Beta testers, including in Australia and New Zealand.

His crowd-funding campaign was fully subscribed in three hours, 200% in 12 hours and raised $A164,255 from 688 backers within a month.

The campaign page is still live and has now amassed $A213,415 from 885 backers.

Indiegogo has a duty to remove or at least suspend the page and stop taking money when they have been alerted to potential fraud by several backers until it can be resolved.

The comments on the crowd-funding page seem to suggest Maurice of Poland is now living in Vietnam.

A reader who tested the prototype said it’s “a great product so I really hope they come through”.

“There have been delays for sure which has been frustrating but I don’t think he has any intention of ripping people off,” the tester said.

“He said he moved to Vietnam because of the COVID-19 outbreak; he was living in Hong Kong while he was getting the production etc sorted out.

“I’m not vouching for him in any way, just giving you some more info. I haven’t had any direct communication from months, but I didn’t expect any either. I think he underestimated the challenges of bringing a product to market!”

Source: MotorbikeWriter.com

Frog leaps to save your motorcycle helmet

If you are frustrated with finding somewhere to safely rest your helmet the “Y” shaped Spanish Frog portable helmet support could be the answer.

Inventor Luis de Arquer says the 70 x 80mm Frog comes in two models that you either carry in your pocket or stick to the top of your helmet with a 3M adhesive strip.

They come in multiple colours, some with motorcycle manufacturer logos, and cost €20 (about $A35) each or half price if you support their Kickstarter campaign.

They claim it will ship to early supporters in January and others in February.Frog helmet support

How the Frog works

The Frog supports the helmet in an upside down position without scratching the surface.

As Luis says, you can then put your gloves, phone, glasses and keys inside your helmet for handy storage.

We wonder whether the Aussie police would be upset by sticking it to your helmet as they have fined riders for sticking action cameras to their helmet before, cleaning it makes the helmet non-compliant.

If that’s a concern to you, try the portable pocket device.Frog helmet support

The miniature tripod device won a A’Design Award for its usefulness and ease of use.

It is based on the Euclid Tripod Axiom which means only three points are required to define a flat plane.

Luis says it is stable enough to secure your helmet, but we wonder whether it would withstand a rickety cafe table or someone bumping into your bike with the helmet on the seat or tank.Frog helmet support

If it does work, it would be a handy little device as it can be difficult finding somewhere safe and convenient to hang your helmet on a motorcycle.

By the way, if you are wondering why a Y-shaped item with three legs is named the Frog, it is apparently named after the Brazilan Brachycephalus tridactylus frog which is the only frog in the world with only three legs.

Source: MotorbikeWriter.com