KTM RC 8C Preview

Just 100 units of the track-only RC 8C will be produced.

Just 100 units of the track-only RC 8C will be produced. (KTM/)

KTM has revealed the limited-edition, track-only RC 8C, a bike that promises to be a whole lot of fun for those who enjoy turning a lap or two. There will be only 100 units produced worldwide, with each one hand-built for track duty.

The bike features all sorts of race design and tech.

The bike features all sorts of race design and tech. (KTM/)

The machine is powered by the same parallel twin found in the 890 Duke R, offering 128 hp and 74 pound-feet torque. Plenty of pull considering the bike will weigh just over 300 pounds. Most of the internals remain the same as those offered in the 890 Duke R, making it easier for owners to source replacement parts when needed, but a few items are changed. The intake, for instance, is updated with a new airbox and Twin Air filter combination to improve throttle response and airflow. The bike also features a race-spec exhaust system built by Kramer Motorcycles, which utilizes an Akrapovič titanium muffler.

The RC 8C has quick-release bodywork and plenty of crash protection.

The RC 8C has quick-release bodywork and plenty of crash protection. (KTM/)

The mill bolts into the light and stiff chromoly steel tube trellis frame, made specifically for the track. It’s suspended by a WP Apex Pro 7543 fork and WP Apex Pro 7746 shock. The fork has an internal reservoir and cartridge system developed for racing, giving riders finer ability to tune settings. The shock is similarly up-spec, also with fully adjustable settings, including high/low-speed compression and rebound adjustability. A WP Apex Pro 7117 steering damper is also included.

Complete with Kramer Motorcycles-designed exhaust system and Akrapovič exhaust.

Complete with Kramer Motorcycles-designed exhaust system and Akrapovič exhaust. (KTM/)

Braking comes by way of a top-shelf Brembo setup. There are two Stylema calipers and dual 290mm floating discs at the front and a two-piston Brembo caliper gripping a 230mm floating disc at the rear. A Brembo 19RCS Corsa Corta radial master cylinder takes design and function from the unit used in MotoGP, allowing the rider to calibrate the brake’s bite point to their personal tastes through three different settings.

Slim and lightweight, the RC 8C promises to be a ripper.

Slim and lightweight, the RC 8C promises to be a ripper. (KTM/)

The bike rolls on lightweight Dymag UP7X forged aluminum wheels and utilizes Pirelli Diablo Superbike slicks. The wheels are designed to be released quickly, without having to disassemble the brakes. The slim bodywork is also on a quick-release system and includes RC16-inspired winglets for enhanced stability. Since this bike is likely to inspire riders to push the limits, KTM also includes a number of crash-protection upgrades as well. These include crash pads on the frame, fork, and swingarm.

Built for speed.

Built for speed. (KTM/)

The fuel tank is integrated into the seat unit, aiding in mass centralization. It also features a click-on fuel line connector to make draining the tank faster and easier.

The RC 8C is powered by the same parallel twin found in the 890 Super Duke R.

The RC 8C is powered by the same parallel twin found in the 890 Super Duke R. (KTM/)

It’s also kitted out with plenty of race tech, including the full-factory AiM MXS 1.2 Race dashboard with datalogger and GPS functionality. All the info is presented on a 5-inch TFT display. The data can be analyzed using the AiM Race Studio at no extra cost, so riders can look at everything from track speed, lap times, throttle position, rpm and gear, engine stats, track position, ECU model, oil pressure, and more.

Top-shelf WP suspension components smooth the bumps.

Top-shelf WP suspension components smooth the bumps. (KTM/)

The ergonomics are also easily adjusted to suit a variety of riders. The CNC-machined footrest holders offer more than 2.5 inches of height adjustment across three steps. The CNC-machined handlebar clamps have interchangeable tubes and laser-engraved markings to ensure settings can easily be replicated. The headstock, fork offset, ride height, and seat height are all adjustable as well.

The bike rolls on Pirelli Diablo Superbike slicks.

The bike rolls on Pirelli Diablo Superbike slicks. (KTM/)

Head to KTM’s RC 8C site to get on the waiting list for the bike.

In the meanwhile, check out more views of KTM’s RC 8C below.

Winglets included.

Winglets included. (KTM/)

A view from the cockpit.

A view from the cockpit. (KTM/)

The AiM MXS 1.2 Race dashboard logs all pertinent ride data.

The AiM MXS 1.2 Race dashboard logs all pertinent ride data. (KTM/)

Get the perfect fit with a bevy of adjustable ergo options.

Get the perfect fit with a bevy of adjustable ergo options. (KTM/)

Source: MotorCyclistOnline.com

An informed discussion on electric motorcycles and the end of the ICE

Electric Motorcycles and the future of motorcycling
An informed discussion with three view-points

With the EU moving towards a mandate for the cessation on sales of petrol powered cars and motorcycles by 2035 there is little doubt that Australia will follow a similar course of action.  Thus we thought it a good time for Trev to air his views on the current state of play and then invite two smart guys that are both heavily invested in, and very knowledgeable of the challenges and advantages that electric motorcycles have the potential to bring. Both have built and designed their own electric motorcycles and are Australian EV pioneers and can add much to the discussion. 


Trev

“There is no doubt that unless truly monumental steps forward are made in relation to battery technology, touring Australia by motorcycle will become virtually impossible when legislation eventually ends the days of the internal combustion engine. 

“Australia is the sixth largest country in the world and the world’s largest island with a land mass of 7.7 million square kilometres which equates to five per cent of the global land mass, yet has a population that is less than cities such as Tokyo, Delhi or Shanghai. Once away from the major cities, where 67 per cent of the Australian population live, the interior is one of the most sparsely populated areas on the globe. We are a long way from where these new emissions legislation rules are being made and with our wide open spaces these restrictions will affect us more greatly than most places on the planet.

“Currently you can cross Australia on the southern routes without having to go more than 200 km between fuel stops. You can ride most of the way up the eastern and western seaboards on even shorter ranges until you get north of the Tropic of Capricorn, and even then there are only a couple of stretches where ranges in excess of 250 kilometres are required. And of course with fuel it is a simple case of splash and dash and you are generally back up and running in under ten minutes. No planning required. I could set off tomorrow on virtually any conventional motorcycle and repeat my 16,000 kilometre in 15 day lap of Australia without a worry in the world and nothing but a credit card in my pocket. Notwithstanding the individual fiefdoms that Australia has now become with closed state borders of course, don’t get me started on that score!

Riding Around Australia - Argyle
Touring the remote parts of Australia is not going to be viable on an electric motorcycle any time soon

“On current technology and infrastructure if you can find a power-point in the bush, you might be twiddling your thumbs for ten hours or more in order to obtain a full charge from empty. Even a Perth to Melbourne run, a relatively short 3500 kilometre distance that is easily ridden in three days if not meticulously planned while riding something akin to a $50,000 Harley-Davidson LiveWire or similar EV motorcycle, would likely take longer than my 16,000 kilometre lap of the country. And that journey would be the antithesis to what my type of motorcycle touring is. Touring on two wheels for me is best enjoyed with the minimum planning possible and no real schedule to stick to. Otherwise it just feels like work and tedium. Motorcycles are about freedom and fun, not schedules. And motorcycle touring is not about waiting around for half your trip waiting for your motorcycle to charge. On current EV technology you would spend more of the trip waiting for your motorcycle to charge than you would spend riding… 

The LiveWire has its drawbacks as Wayne recently found in his review.
That said, I applaud H-D for investing in to this future and I think the first generation LiveWire might eventually become a sought after collectible.

“Modern combustion engined motorcycles achieve their best economy on the open highway, these days generally sipping around five-litres of juice per 100 kilometres. Conversely, open road touring is actually the worst case scenario in regards to range for battery powered motorcycles as there are no braking cycles to help recharge the batteries and the bikes are under a constant throttle load. Thus at the moment, and for the foreseeable future, battery powered vehicles are by far more practical in the urban environment than they are in rural or even outer urban areas. The current options when it comes to EV motorcycles rarely achieve ranges exceeding 120 kilometres during highway running at the national speed limit.

“Does this mean that for the foreseeable future the only real practical battery powered motorcycles will be scooters used in the city?

“Right now, to my mind, this is where the battery tech is getting good enough to be a truly viable practical alternative to a petrol powered two-wheeler.  But there is also a significant price penalty to pay to go EV.

Suzuki’s Address 110 sells for $3790 Ride Away, nudges 100 km/h and sips only two-litres per 100 kilometres. Thus it has a range approaching 250 kilometres from its 5.2-lite fuel tank, but let’s go worst case scenario and say the range is 200 kilometres. 

Super Soco CPx

“One of the newest EV scooters on the market that is just about to launch in Australia is the Super Soco CPx.  It has a range of up to 75 kilometres when a 75 kg rider averages 45 km/h, but in reality its true range is more like 60 kilometres. The price tag is more than twice that of the Suzuki but it’s fair to assume that the EV perhaps accelerates quicker, however its 90 km/h top speed is actually slower than the little Suzuki.  Charge time is about 3.5 hours and while an extra battery can be added to the PCx for $2300 that doubles the range to over 120 kilometres, it also adds a couple of hours to that charge time.  For less than the price of Super Soco PCx you could have a wonderful XMAX 300 Yamaha. A much larger, roomier and more comfortable scooter that will cruise comfortably at 110 km/h and also offer overtaking power good enough to crack 150 km/h while sipping a few litres per 100 kilometres. 

“So essentially you currently pay double for the EV option if comparing models of similar performance.  That also rings true in the world of full-size motorcycles with Harley’s new V-Twin Sportster 1250 S to retail for just over 25k, half the price of the EV LiveWire.

“There is no doubt that EV is coming but early adopters certainly pay a hefty price premium for the benefits, perceived or otherwise, of going without petrol.   

“I would love to get my hands on BMW’s coming electric CE 04 scooter with its impressive power (42 hp) and torque (62 Nm), creature comforts and avant-garde looks but when it arrives early next year it will wear a price tag over 20k.  Even this top of the range EV still only promises a range of 130 kilometres. Its top speed will be limited to 120 km/h but BMW are claiming an impressive 2.6-seconds for the 0-50 km/h traffic light dash which should make it a convenient weapon around town. Charging time from empty is over four hours but an optional, and no doubt expensive, quick-charging set-up can be purchased that reduces charge time significantly, taking the CE 04 from flat to full in well under two hours, and facilitating charge from 20 to 80 per cent full in only 45 minutes. That’s getting a lot more practical, and the fact that city dwellers will also be able to use the same existing EV charge points as the BMW electric cars will add further amenity. But, it’s still over 20-grand for a scooter. You can grab a GS for not much more, or an Africa Twin for even less…

I love the promise that the BMW CE 04 offers but for 20k you are getting into GS or Africa Twin money…

“Time will change this cost-benefit analysis as technology improves, or petrol starts multiplying in price, but right now EV motorcycles and scooters just don’t add up when it comes to cost, convenience or performance. They are a very niche product within an already niche market that is motorcycling in this country.

Honda Mobile Power Pack
Honda Mobile Power Packs can be simply removed and replaced with already charged units

Hot swappable battery technology, the likes of which some brands are already working together on, would be a real breakthrough in regards to the viability of electric motorcycles becoming truly practical in the short term. Being able to drop into a charge point and simply pull a battery out and replace with one already fully charged to get back on your way. This would enable refuel times comparable to petrol powered motorcycles.

“Essentially this could also help reduce the cost of entry as manufacturers could sell their electric scooters or motorcycles, then the buyer simply take up a battery lease program where they have constant access to batteries but without the up-front capital cost of purchasing their own battery. This option is starting to build steam and is referred to as ‘Battery as a Service’. Kymco have already rolled this out in Taiwan where they already have over 2000 swap stations with their system called ‘Ionex’.

Removeable battery packs will add great versatility to both personal consumers and fleet buyers
Removeable battery packs will add great versatility to both personal consumers and fleet buyers

“From my scribblings here you would think I am against change, I am not. I look forward to something like the CE 04 becoming as affordable as an XMAX 300.  I look forward to the improvements in battery technology that are coming which will really shake things up. I look forward to agile light-weight enduro, motocross and trials bikes that are whisper-quiet and offer comparable performance to that available from the current petrol powered options. 

“That said, I think the chances of being able to tour Australia on an EV motorcycle without meticulous planning and constant range anxiety might not even happen within my life-time. But who knows, I have been running MCNews.com.au now for over 20 years, and may revisit this piece in a Throwback Thursday come 2040, or even earlier, and announce that I was wrong…

“I do take significant umbrage though at authorities and agencies enforcing this change and shoving it down my throat before it becomes truly affordable and viable in the real world. But this is where we will be as manufacturers respond to government pressures and stop making new internal combustion engine powered vehicles. Euro6 will essentially kill new petrol powered vehicles of all types stone dead. 

The PCX Electric or the battery packs will be easily chargeable, ideal for a commuter machine
Replaceable hot, swap and go battery packs that are able to be used across many brands are likely to prove the way forward when it comes to EV powered urban mobility solutions

“We also have groups lobbying government to not only waive stamp duty, import duties and luxury car taxes for electric vehicles, but also force property developers to install EV charging points in their parking bays and have taxpayers stump the bill to install charging points in public car parks. Thus EV early adopters effectively are seeking everyone to underwrite their eco warrior sanctimonious self gratification exercise, then they want the power for free too! Power that was probably made by burning coal in the first place anyway!

“As we approach the year 2030 the shift away from internal combustion engines will increasingly gather steam (did you tell how much I love steam power LOL) as we approach that real tipping point for the transition away from fossil fuel powered transportation. This month UK authorities announced a ban on the sale of new petrol powered motorcycles from 2035 and various other announcements have been, and will be made around the world that will sign the death warrant on motorcycling as we know it. But then we do have a new era of motorcycling to look forward to and I do that with an open, but realistic mind. 

“Racing authorities are also heavily invested in preparing for change. We of course have MotoE already acting as a support class at selected rounds of the MotoGP World Championship and the FIM recently announced the creation of a new all-electric off-road championship. People are already joking that it will make for some good 15 minute races as even in racing EV ranges forces organisers to race distances that are a fraction of what petrol powered motorcycles race.

“Under changes that are actually coming into play now you will no longer have the ability to clear fault codes from your motorcycle, only an official dealer will have the power to clear fault codes. Want to dyno or tune your machine outside stock parameters? They are putting a stop to that now also.  I understand that things are going to change, but we do need our own politicians to not blindly follow rules enforced by geographically small countries in their quest to be woke.

Trev’s 2017 Husqvarna TE250 – Pretty much two-stroke perfection right there

“I live on 100 acres and will do everything within my power to still be enjoying the visceral and emotional connection to motorcycle history that my 250 two-stroke Husky punches into my aural and olfactory senses even after the government tells me not to.  I also have a supercharged V8 Ford that I might need to stockpile juice for in preparation for the days when the scenes presented in the first Mad Max movie become reality. 

“Or if that ends up being too difficult, maybe I will have to settle for an old-school blown or quad-Weber fed push-rod V8 on an engine stand to start up and pay homage to as an object of worship over beers from time to time up the shed. Actually why wait, that sounds an awesome plan to put into action right now! Hold my beer!

Excuse me, I am having a moment…

“Of course we could have a huge breakthrough in biofuel or synthetic fuel technology that extends the life of internal combustion engines.  As for the ecological argument I don’t think motorcycles burning fuel make much impact in the grand scheme of things. Of course making the power to charge EV vehicles largely comes from coal fired power stations anyway..  Speaking of which, China is still building those coal fired power stations at an ever increasing rate and are responsible for almost 30 per cent of global emissions.  Preventing people breeding and polluting the planet with more humans is probably the biggest positive impact we can have in regards to the health of the planet but the self-righteous moralising greenies don’t talk too much about that…”

Right of reply

Now as Trev is obviously not all Greta Thunberg enlightened and stuff, we thought we might seek some opinions from a couple of people in the know, a couple of fellas that have their fingers in the currents of this EV stuff. And first cab off that electrified rank is Dennis Savic.


Dennis Savic

Dennis Savic is a homegrown visionary that has had the balls to design, manufacture and now market his own brand of electric motorcycles.   

Like me, Dennis hails from Perth, but where I first headed east to join the Defence Force at the young age of 16 as that was the only way to earn an adult wage at such a young age that would enable me to spend all of said wage on fast motorcycles and cars.  Dennis instead studied mechanical engineering and then gained an M.B.A. before assembling a team of young engineers to bring to reality his dream of producing his own motorcycles.

Dennis with an early prototype

Obviously we both share a passion for motorcycles but come from very different backgrounds and lived experiences. At 29, Dennis is also 20 years younger than me but funnily enough, despite his life being invested in the production of EV motorcycles, he also has some reservations as to their real-world capabilities and current limitations. God I love using the word ‘current’ as much as possible when talking EV motorcycles…

Over to you, Dennis

“Trevor, thank you for including us in the conversation. Despite the two wheeled EV industry and this business consuming 90 per cent of my waking life, I should probably preface my comments by admitting I’m also a petrol head. My favourite cars include the ’69 Mustang Fastback, and my dream car is the Mercedes 300SL. My favourite bikes include the Triumph Bonneville Bobber and the Indian FTR, and a tonne of custom builds. I still love working on petrol vehicles for fun, so I guess I’m sharing that I empathise with common EV challenges and understand range anxiety well. Now, there are two primary issues that I believe we’re talking about: the first is range capabilities, and the second is pricing. While they are related, they can – and should – be considered separately.

Range Capabilities

“I agree with you that touring isn’t for electric motorcycles, and won’t be for a long time. Unfortunately, it all comes down to dollars and cents. And this is as true for the majority of customers as it is for any business. I’ll talk about EV pricing in a moment, but before I do I think it’s important for riders to actually take inventory of how often they go for cross-country rides and how often they go for long rides with their mates on weekends.

“The answer to the latter is probably far more often than touring the country. So what’s the average range of a weekend ride – 400km? 200km? Whatever the case, if someone does this kind of ride more than once or twice a year, they would need to consider having a second petrol bike to go and do hill runs. This could be rented or owned, but either way, it makes the rare weekend ride a very expensive hobby.

“I don’t know what proportion of the riding population never rides more than 200 km on a single ride, but I would argue that it is large enough for us to have enough of a business case to supply the Australian market. Business cases are assessed with rudimentary maths. How many can one sell, at what price, and what is the cost to make, distribute, and operate the business? Which brings me to the pricing challenges EVs face.

Savic Motorcycles
Pricing

“Most EVs are highly priced. Governments can ban petrol vehicles to try and force the shift, but this doesn’t flick a switch and make the supply chain cheaper. What makes the supply chain cheaper is volume manufacturing, and that’s going to take time. It’s a chicken and egg scenario. We need volume to decrease costs, but we also need sales to increase volume, and people aren’t buying because, like you say, EVs are expensive, which comes back to the supply chain. Government bans in Europe will help increase the volume/demand part of the equation, which is great – a fun problem to solve.

“With respect to Savic Motorcycles’ advertised prices, time and again, investors and potential investors have been telling me that our $23,900 price point for the Savic Alpha is too low. I argue that it isn’t. Our first bike, the C-Series Alpha, sits in the same price bracket as other new premium ICE motorcycles. My mission was always to set the price point to be competitive with existing ICE motorcycles, and then work our asses off to develop and implement our business case. When we figured we could, we got started and we haven’t slowed down since. With the cost of battery cells continuously dropping, our margin targets have slowly grown and simultaneously enabled us to offer our customers more capacity.

Today’s EV Motorcycle Customers

“I cannot speak for the LiveWire riders in Australia, but I think most people will agree the $50k price tag is pretty hefty. What I can say is that we at Savic Motorcycle have sold out our first production run without a single test ride. Whether that’s due to our design, price, or our being Australian is hard to say – to be fair, it’s probably a mix of all three.

“I have personally spoken to most of our first customers because we’re an early-stage business. All of them understand the charging limitations, and almost all put their orders in with the intent of charging at home overnight. This indicates that they either have a second bike, or don’t do hill rides. But they want a sexy bike (if I say so myself) to get around town on – and to do the occasional longer ride.

“A couple of our customers are lifelong Harley riders. This absolutely shocked me. Why did they place an order for one of our bikes? The truth is, they loved the design above all else. The fact that it was electric and reasonably priced was just a bonus.

Savic Alpha

“Everything is in flux at the moment. Market segments, customer profiles, products. No one knows what is going to happen in 20 years. People can just speculate. A company like ours has an advantage because we’re small and nimble, and can pivot our product strategy at the drop of a hat without huge negative repercussions with excess inventory, or thousands of engineering hours spent in product development.

Savic Motorcycles

“So will eMotorcycle ranges change much in the next five years? Unlikely if you still want to have a bike that retails at some astronomical price. Will the price come down dramatically over the next five years? I don’t think the price will come down too much, but you will see many more entrants in the market due to the cost of manufacturing dropping. Will the big OEMs come to play soon? Maybe – but they’ll have to massively up their game if they want to produce a decent bike!

“I also know Chris Jones well and it’s been a long time since we’ve spoken. “Hi Chris!!”


Chris Jones

The next fella I thought of charging with a reply was my old mate Chris Jones. Another Western Australian!  

Chris is a mad scientist that first specialised in plant biochemistry but then diversified into working with battery technology and electric motorcycles. 

In fact, Chris, with the help of a couple of friends made his own electric motorcycle that his team raced in the eFXC Championship that first ran as a support class alongside Terry O’Neill’s Formula Xtreme Road Racing Championships in 2014.

Chris with Voltron at Queensland Raceway iin 2016

The next year Chris formed a company with Mike O’Hanlon called ‘Voltron Motorcycles Pty Ltd’ with the aim of developing a motorcycle and battery system that will eventually enable them to manufacture electric superbikes.  The small matter of having to earn a living and pay bills has slowed their progress but the dream remains alive. 

Chris has also been the National Secretary of the Australian Electric Vehicle Association for the past five years and was instrumental in the design, build and installation of The RAC Electric Highway that links Perth to the south-west coastal town of Augusta via a network of publicly available charging stations. 

Chris (third from left) was a driving force behind the EV fast charging stations now installed in the south-west of the country in partnership with the RAC

Chris is also currently working with the WA Government with the aim of having DC fast-charging stations installed around the state.  Knowing their Premier maybe he will also get Chris to put an electric fence around Western Australia to keep the plague-ridden eastern stater types out! 

Clearly Chris is heavily invested in EV technology and is well and truly plugged into the scene and thus I thought his views on the subject might be interesting to hear. 

Take it away Doctor Jones!

“Not long after man walked out of the jungle, he developed an unhealthy obsession with burning stuff. Unsatisfied with burning half the vegetation on planet Earth, he discovered an even more energy dense fuel beneath his feet. Coal and oil allowed him to burn stuff with so much heat, for so long, he could literally throw 80 per cent of the energy away and still push a machine down the road. Mankind has since built almost 4 billion such machines, and 1.4 billion are in active service today. Roughly 400 million of these are motorcycles. Evolution baby!

“But this 250-year bonfire has resulted in two very serious problems. One, the poisonous smoke from these internal combustion machines is literally killing us. Acute respiratory disease caused by automobile pollution kills at least 8.7 million people every year worldwide. Air quality is so poor in many Asian cities the recommendation is to stay indoors and wear a mask. The other problem – arguably the more chronic one – is that the trillions of tons of carbon dioxide released after burning all these fossil fuels has been trapping heat in our atmosphere; raising the temperature by about 1.2°C already. If nothing changes, we’re set to pass 5°C by 2050. We are already bearing witness to the impacts – floods, heatwaves, sea level rise, devastating bushfires and of course, the inevitable extermination of large swaths of living beings.

“So if you’re wondering why administrations around the world are keen to halt the production of internal combustion engines, by force if they must, it might be because they have a duty of care to prevent pain and suffering of their citizens. People rightly expect their leaders to respond to such global existential challenges, even if they are of our own stupid doing. But these same administrations are also acutely aware of how hopelessly dependent we are on the automobile. Food, medicines, building materials, textiles and telecommunications; you name it – motorized and wheeled transport makes it happen. Fortunately, we have an alternative technology to the internal combustion engine, and given our collective reluctance to assume responsibility for our profligate ways, the electric vehicle is arguably the least-worst option to replace it.

“In looking at the two most pressing problems – air pollution and global warming, electric vehicles are an obvious solution to the former, and as the electricity grid continues to get cleaner, also a useful tool in addressing the latter. So which vehicle is most commonly seen battling the streets of our most congested cities? The humble motorcycle. If ever there was a prime candidate for electrification, this is it.

“The 2035 phase-out is actually quite conservative – we’ll hit that target well beforehand. 2035 is a long way off, given the huge advanced we’ve already seen in EVs in the last decade. The vehicles will both get better and cheaper, and motorcycles will be in that graduating class. The ultimate commuter would be an electric motorcycle with about 40 kW of peak power and about 15 kWh worth of battery. This would give it over 150 km of quiet, emission-free city range. Longer rides will necessitate a bigger battery, and more regular DC fast chargers for rapid refills along the way.

“So when can we expect to see an electric motorcycle capable of steering me from Perth to Phillip Island in under 4 days? Well, probably when two things happen: Firstly, when DC fast chargers can be found at every roadhouse across the Nullarbor, and secondly, when batteries allow over 20 kWh to be conveniently stored on the bike. On the first point, DC chargers are being rolled out around the country, and the east-west route will certainly be completed well before 2024 if I have any say in it. The second point is actually a matter of budget more than technology – sufficiently energy dense batteries already permit a 230 kg bike to house a 100 kg battery, capable of 200 km at highway speeds. The issue is mostly cost and right now, a $50,000 bike capable of the same metrics as a $12,000 ICE bike is a hard sell.

Thyron Van Vuuren did get down to some good times on the Voltron bike made by Chris, but in regards to EV motorcycles even the races have to be short due to range issues – Image Tony Castley

“Cost is a funny thing when discussing motorcycles, as we’ve all spent way more than we ought to on bikes that deliver immense joy. Still, we harbor no regrets. Take Honda’s 2021 CBR1000RR-R SP machine; it’s the ultimate track weapon with 214 hp and checking in at 201 kg. At a mere $50,000, it’s not exactly cheap. But other than 70 years of Honda engineering prowess, our home-built electric race bike, Voltron Evo stacks up surprisingly well. 214 kg, 230 hp and a similar build budget, a competitive lap time wasn’t that far off. It was worth every cent in that regard…

“However right now, our collective desire to own machines capable of roadtrips our grandparents could never dream of is taking its toll on the planet we call home. We owe it to the next generation to stop burning coal and oil. It’s that simple. Extinguishing the epic, self-inflicted house fire we started 200 years ago really ought to take precedence over our desire to circumnavigate the country in under a fortnight. We need fewer vehicles, and all of them should be electric. Electric motorcycles and scooters are the perfect solution for urban travel, while longer range machines are on their way.”


Well there you have it, three opinions with three different viewpoints.  Feel free to add your considered opinion using the comments section below. Or if you have a well detailed piece that will further enlighten our readers feel free to get in touch with us with a view to consideration for publication.

Source: MCNews.com.au

Bayliss family interview | A nod to the past and a look to the future

Troy, Oli and Kim Bayliss family interview

Trev: So what year are you in at school now Oli and do you like school or are you counting the days until you leave”

Oli Bayliss: “I’m in year 12, but I’ve got about 19 days left. So I’m pretty keen to get out of there, but the school that I’m going to now I’m a lot happier in than the one I was in before.

Oli much prefers this type of study – Image RbMotoLens

Trev: And after your breakthrough Superbike win in Darwin you said you were looking towards mum cooking you a nice celebratory dinner, what did you have?

Oli: “Good ole BBQ, just a nice BBQ at the house we had at Darwin, with the whole team.”

Oli in the DesmoSport Ducati put in Darwin – Image RbMotoLens

Trev: Kim, it must be like feeding an army when both Oli and Troy are training hard?

Kim: “Yeah, pretty much. Oli is not too bad now, but there has been times when it’s been like that. Troy tends to have about five breakfasts before we’ve even started our day.”

Kim and Oli in Darwin – Image RbMotoLens

Trev: I believe Abbey recently finished her studies and Mitch is going great guns with his fitness centre. Of course I should note that it was Mitch we would often see on the podium with you Troy back in those earlier days of World Superbike as Oli was still yet to be born.

Kim: “Mitch is doing good in the gym, Abbey has one month to go for Uni, so she’ll be finished around the end of August, and she’s gone really good. But they’ve been in lockdown for quite some time now. Her Uni has been online more than it’s been offline, in the last 18 months. She’s studying maths/statistics.”

Trev: She’ll be good to go into programming ECUs for Oli later on!

Kim: “She might be too, but I think she’d run in the opposite direction.”

Trev: It was Mitch we’d often see on the podium with you in those early days Troy, before Oli came along. When was the first time Oli went up there with you, can you remember?

Gregorio Lavilla WSBK Misano R Podium
Mitch Bayliss on the podium with Troy at Misano in 2001 – Ben Bostrom P2 and Gregorio Lavilla P3

Troy: “I am not sure, but I definitely remember the last time, it was the last race at Portimao in 2008, we had the whole crew up there. So that would be the one I remember the best.”

The whole Bayliss clan on the podium at Portimao in 2008, Troy, Kim, Mitch, Abbey and Oli – Image 2snap

Kim: “I don’t really remember Oli being up on the podium.”

Oli Bayliss on the podium with Kim and Troy at Portimao in 2008 – Image 2snap

Troy: “I’d see Abbey down the bottom, I’d always throw her the flowers, which she used to love, when she was little.”

The whole Bayliss clan on the podium at Portimao in 2008 – Image 2snap

Trev: How is the recovery from the bicycle accident going Troy? I believe at one point you struggled to regain full feeling and control of your hands due to damage pressing on the nerves in your neck, that’s a bit scary.

Troy: “It’s definitely getting better, I said to Kim today at the park with the dogs, I’m the best on my feet that I’ve felt. I’ve been really unco, it’s been a weird thing, my whole body has pins and needles all over, not terrible, and when I put my head down, it was much worse in the shoulders and arms. So still trying to work out what’s going on there. I think it’s just – I’ve got to get some more MRIs – with my head in some weird positions to work out what’s going on. It could just be a long ongoing recovery, that’s just going to take a bit longer.

Oli Bayliss with his dad, three-time World Superbike Champion Troy Bayliss – Image RbMotoLens

Trev: It could just be a matter of time for things to settle down.

Troy: “Yeah, now I look at… I was really angry and just hating life… but now I think about it, I’m in no hurry and I’ll possibly be fine, so I’m pretty lucky.”

The Darwin ASBK round in mid June was the first time Troy had really spent a lot of time out and about on his feet since the bicycle accident a month earlier – Image RbMotoLens

Trev: I’m sure that makes it easier for Kim and Oli to live with you.

Troy: “The first six weeks were absolutely horrible, but it certainly adds a different perspective, when something like that happens to you. I’ve never had anything like that before. I wouldn’t have wanted to be racing and have had this injury. It would have been a changing moment in my life I reckon, but it doesn’t really matter so much now. But you don’t want that early on.”

Ducati Panigale V2 Troy Bayliss 20th Anniversary Edition

Trev: The recent honour with Ducati revealing a special-edition Panigale V2 commemorating the first of your three Superbike World Championships two decades ago must have been really something to make you all feel proud.

Troy: “Definitely Trev, you sort of take it for granted a lot, especially back in the day when you’re riding. But now you appreciate it more and you look back and go, ‘Damn, that was really good for me,’ and the whole thing, it was a great job. And then when they come out and do the bike like that 20 years later, it means they are still thinking about you. That’s pretty good.”

Troy was on the European telecasts from the Assen WorldSBK round where the V2 Panigale Bayliss 20th Anniversary was on display

Trev:  I think I can speak for most Aussie road racing enthusiasts, most of us that watched that presentation for the bike reveal with Claudio (Domenicali) and Davide (Tardozzi), many of us got a bit of a lump in our throats as well, there was some great memories to relive. It truly is great to see them commemorate those again, it’s awesome to be remember that time which really was perhaps the zenith of World Superbike competition.

Michael Ruben Rinaldi did some promotional demo laps at Assen on the weekend aboard the new Ducati Panigale V2 Bayliss 1st Championship Anniversary Edition – If not for the combination of COVID and Troy’s recent bicycle accident it would have been Troy there on track at Assen last weekend

Troy: “It is really so good, I’ve got so many good memories of it all.

Kim: “It’s surprising to think it was 20 years ago Trev.

Bayliss and the team at Portimao in 2008 – Image 2snap

Trev: So guys, the house going up for sale, does this mean you are preparing to head to Europe next year with Oli?

Troy: “No, we’re going camping *laughs*. Well, we sort of put an offer in on a farm just over the border in NSW, but we’ve missed out on it. Now our house is going to auction on the fifth of August, so we’re sitting back and waiting to see what happens. Worst case scenario we’ll stay where we are, and if the place sells we’ll go find somewhere.”

Trev: You haven’t put an offer in on Mick’s palace have you, on the canals up there?

Kim: “We’re trying to go smaller in the house size.”

Troy: “Everyone has left and there’s only Oli left, and quite often it’s Kim and I by ourselves, and we don’t need this much space. But then of course, there’s designs for Oli next year. So there’s heaps of stuff going on, and putting it all in the right place and right direction.”

Oli and Troy at Hidden Valley – Image RbMotoLens

Trev: With regards to Oli, it’s been quite unusual for an Aussie youngster to stay on our shores for so long, and race superbikes here, it’s been fantastic. All our other young guys that have gone on the world stage, left before they had even reached senior road racing here, most never even raced a 600 in Australia, let alone a superbike before they headed to Europe.

Troy: “Some of the guys are going good too, but there’s all different ways you can go about it. I was hesitant there for a little while, because Davide (Tardozzi) was pushing a couple of years ago, saying if you’re serious you should be coming over now, but I wasn’t sure and was kinda going long with that. But now I’m 100 per cent behind what Kim’s idea was – he had to finish school, with plenty of other things going on here. If anything it has worked out better here, he’s only 17-years-old and he’s gone through school. He’ll be able to count the laps now.

A lot of people have Oli’s back – Image RbMotoLens

Trev: What do you think would be the next logical step if he does head to Europe, or England, or whatever? Do you take a step back from a superbike, maybe this new fledgling supersport class, where they are talking about racing the Panigale V2, and triple-cylinder 765 cc Triumph. With a view to a new look 2022 FIM Supersport World Championship organised by DWO, would this likely be the next stepping stone for Oli in his career?

Troy: “I was wondering, I didn’t know that people were talking about getting that in. I know from other ways that the bike was looking at being put in there, so we’re looking down that road, we’re looking at World Superbikes, looking at BSB, and looking at Moto2.

Kim: “Basically we’re very confused.”

Troy: “It’s hard times at the moment, thinking about the right steps to take, but we’ve got a bit of an idea.”

Supersport rules are changing and being opened up for bikes such as the Ducati Panigale V2 to compete as the world shifts away from 600 cc four-cylinder machines

Trev: I guess just seeing which is the right opportunity that presents themselves, because as you well know, how your big break came, you need that little bit of luck at the right time, right place, right time…

Troy: “it’s interesting times, you know, it’s exciting times too. But stressful as well.”

Trev: Good luck getting another farm, or that one you’re looking at.

Kim: “Who knows where we will end up.

Trev: I’m on 100 acres up here in the mountains and largely ignore the universe, and find that a pretty good way.

Troy: “Lucky you, we want to do that sometimes!”

Trev: Have a great week and thanks for your time.

Troy congratulates Oli on his win in Darwin – Image RbMotoLens
Troy Bayliss Ducati WSBK 2001
Troy Bayliss Ducati WSBK 2001
Troy Bayliss Ducati MotoGP 2004
Troy Bayliss Ducati MotoGP 2004
Troy Bayliss in his last race as a full-time official racer – Portimao 2008 – Image 2snap
Oli Bayliss recently broke through for his first Australian Superbike race and round win in Darwin – Image Rb MotoLens

Source: MCNews.com.au

Long Way to Wauchope | Part 5 | DMK Designs & Wauchope

The Long Way to Wauchope

With Mark Battersby

View All Parts


Day 5

After a long night with little sleep it was time to load the bike up and head to a pressure washer to clean the bike and be at DMK by 7:30 am. I feel like a kid on Christmas morning and can’t wait for my new graphics to be fitted.

I’m ahead of schedule, the Tenere is kind of clean, so time for a quick McBreakfast before heading over the DMK. I meet Jeff’s right hand man Wayne and no doubt bore him with my excitement of having the graphics fitted. He shows me the graphics laid out on the cutting table and I ‘Ooooh’ and ‘Ahhhhh’ over the design.

Posing with my transformed Tenere 700 at DMK Designs

I position the bike for the obligatory before photo and let Wayne go to work preparing the bike for her new clothes. After thirty minutes or so, it dawns on me that he probably isn’t enjoying me watching every move and suggest I head over to McDonalds for a coffee. Very politely Wayne replies that’s a good idea and to come back in an hour or so.

Back to McDonalds and time to reply to some of my Facebook comments and questions which motivates me to improve the documenting of my trip, especially the GoPro component which has been inconsistent at best.

Two hours pass quickly and I head over to see Wayne and my ‘Dakar’ themed Tenere. ‘Wow’ is my initial response and I immediately start taking photos of the finished product. Great job guys, the attention to detail and installation was awesome.

Where has the day gone? Wauchope is calling and I want to be there before dark if possible. Jeff had suggested I take the Bylong Road, and after a few stubborn conversations with my ZUMO XT GPS off we head. Leaving town I keep looking down at the tank like a kid admiring his new toy. I’m sure you could see my grin through my helmet.

Speaking of grins, the road through the Bylong Valley towards Jerrys Plains is an absolute ripper. The perfect combination of bitumen twisties lowering you into the valley floor, then climbing out of the valley through curves that bring a wide smile to any rider. I saw several road bikes in this section and if I had more time I’d have turned around and ridden this section again.

The Bylong Highway offered some great photo opportunities

It was a quick fuel up and bite to eat at Jerrys Plains and then onwards to Wauchope with still over 300 kilometres to go. I wasn’t ready for the grind of city traffic yet, but as I approached the Pacific Highway just west of Newcastle the queues begin.

The next two hours proved to be challenging in a different way. Fatigue from the last few days was creeping in, it was dark, it began raining and I felt surrounded by trucks and cars who clearly though the speed limit was an advisory sign.

About thirty minutes from Wauchope and I decide to stop to fuel up and take a quick stretch. I still have no plans for tonight, except to meet the RideADV team at the Wauchope Showgrounds. I have my camping gear with me which I haven’t used yet, or I could grab a motel room.

I gave Greg Yager a call just to check they were welcoming strangers at the Showgrounds. Abbey the Sweep Rider answers the phone on behalf of Greg, I introduce myself and Abbey encourages me to come and meet the team.

Have I mentioned I’m a bit apprehensive about my first rally? Although I’ve spoken with Greg a couple of times, I’d never met any of the team, or any of the thirty plus riders who had entered.

With names like TB, Abbey the Sweep Rider, Crash, Clay and Rooster they sound more like outlaw bikers than an adventure rider tour group.

The ride into Wauchope means exiting the Pacific Highway much to my relief and then winding my way into town. The GPS guides me to the showground but I then spend fifteen minutes trying to break into what appears to be a fortified facility. I park up on the footpath and a friendly jogger offers to guide me to the secret entrance.

He points me in the right direction and as I approach the automatic gate it opens as a car leaves. Great – this is my chance to sneak in. The car stops next to me, “G’day Batts welcome, come on in, you’ll see the tent set up. We’re off for ice cream, want one?” I assume they are part of the RideADV team.

The RideADV crew weren’t that scary, don’t let Greg Yager’s looks fool you!

Maybe they aren’t outlaw bikers after all. I still can’t believe I said no to the ice cream. I ride in and see the impressive RideADV set up, this isn’t a tent it looks more like a pop up castle, impressive. The set up is fully lit and I begin casting my eyes over the bling on the crews Tenere 700s as I pull up.

As I slide off my bike and remove my helmet Greg walks over, welcomes me, and we continue our Facebook Live chatting about the ride, accessories and the upcoming rally.

Once the camera is put away Greg introduces me to the rest of the team and makes me feel very welcome. He hands be a coldie and tells me to help myself to pizza. I may have been shy with the ice-cream, but I’m not knocking back pizza. A couple of hours pass quick as they share some of their stories and give me an insight of what is ahead over the next few days.

Its now the wrong side of 10:00 pm, and I need to start thinking about where to sleep. It’s too late and too many drinks to look for a motel so time to break out my new camping gear I purchased the day prior to departure. Setting your tent up for the first time in the dark isn’t ideal, but it’s up in a few minutes and sleeping bag and gel seat pillow ready to go. Then my heart sinks, I’ve forgotten to pack my Xped inflatable mattress.

Let’s say it was long and uncomfortable night sleeping on the ground. Tomorrow is scrutineering day and a chance to meet a few of the riders.


Day 5: 485 km total. Highlight – New Graphics for Tenere. Must do – Bylong Highway.

Stay tuned for Day 6..

Source: MCNews.com.au

Wade Young tops opening day of competition at Romaniacs

2021 Red Bull Romaniacs underway

Sherco Factory Racing’s Wade Young topped the time sheets on the opening day of racing at round four of the FIM Hard Enduro World Championship, Red Bull Romaniacs.

The 2018 Red Bull Romaniacs winner was quick to make his mark on the 18th edition of the world’s toughest Hard Enduro Rallye, setting the quickest time in Tuesday’s Time Trial Qualification. He led home a stacked field, with Jarvis Husqvarna Racing’s Teodor Kabakchiev second and Rockstar Husqvarna Factory Racing’s Alfredo Gomez third.

With anticipation high, the opening day of competition was an early one as competitors tackled an 18-kilometre-long Time Trial Qualification. With the results determining the starting order for tomorrow’s Offroad Day 1 – the first of four offroad days – a strong result would pay dividends.

Race winner in 2020, Red Bull KTM Factory Racing’s Manuel Lettenbichler led the Gold class away, but an early fall put him on the back foot as Young put the power down from the off. Fastest through the first checkpoint, he kept that momentum rolling to the finish line and claimed a healthy 19-second win after 37 minutes of racing.

Bulgaria’s Teodor Kabakchiev produced one of the day’s surprise results with the second fastest time. Kabakchiev finished eighth in 2020 but is already showing he wants more in 2021. Starting third on the road, Gomez was a little sluggish to settle in coming through checkpoint 1 in 12th, but he soon turned that around by jumping to third overall at the finish.

Taddy Blazusiak

I’m happy with my qualifying here at Romaniacs. My start position was a little late, so I had a few slower riders in front, but I was still able to get through and finish in a good time. I did have one crash that cost me a few seconds, but I was able to pick myself up and get back on it pretty fast. I’m really looking forward to the rest of the event now. I enjoyed myself today, the bike feels good and the weather here in Romania is nice and dry this year. Conditions in the forests are dry, so you can really push and make good headway, even in the more technical sections. We’ll see what the rest of the event is like though, I think it’s going to be a tough one!”

GASGAS Factory Racing’s Taddy Blazusia

Hampered by that early fall, Lettenbichler regrouped from eighth at checkpoint 1 to claim fourth, while GASGAS Factory Racing’s Taddy Blazusiak put in a consistently solid ride for fifth, edging out Graham Jarvis (Husqvarna) by one second.

Canadian Trystan Hart is making an impressive debut

Canada’s Trystan Hart was the top performing rookie of the day, with the KTM rider claiming seventh.

Mario Roman

Abestone Hard Enduro winner Billy Bolt (Husqvarna) didn’t have the best outing in 10th, with Mario Roman (Sherco) and Jonny Walker (Beta) in 11th and 12th respectively. However, with ground to make up, the trio will be ones to watch for on Offroad Day 1.

Wade Young (Sherco)

It’s been good to get Red Bull Romaniacs underway. Conditions were fast and dusty out there, but I felt happy straight away and my bike was working great. I’m looking forward to the rest of the week.”

Sherco Factory Racing’s Wade Young

2021 FIM Hard Enduro World Championship
Red Bull Romaniacs: Time Trial Qualification
Gold Class

  1. Wade Young (Sherco) 37:42
  2. Teodor Kabakchiev (Husqvarna) 38:01
  3. Alfredo Gomez (Husqvarna) 38:27
  4. Manuel Lettenbichler (KTM) 38:29
  5. Taddy Blazusiak (GASGAS) 38:41
  6. Graham Jarvis (Husqvarna) 38:42
  7. Trystan Hart (KTM) 39:13
  8. Dominik Olszowy (KTM) 39:15
  9. Michael Walkner (GASGAS) 39:39
  10. Billy Bolt (Husqvarna) 40:23

Source: MCNews.com.au

CFMOTO announce Aussie pricing for new 800MT adventure model

2022 CFMOTO 800MT Sport & 800MT Touring


CFMOTO’s new 800MT range is due to arrive in Australia late in 2021, with pricing of the two variants now released and offering a competitive entry to the brand’s new larger capacity machines, starting at $12,990 ride-away for the Sport. The Touring version will be available from $13,990 ride-away.

The Sport version will be available in a Starlight Black livery, and the Touring in Ocean Blue, and both are powered by a CFMOTO built version of KTM’s 799 cc 95 hp/88 Nm parallel-twin with a ride-by-wire throttle and multiple riding modes, as the joint venture between the Chinese and Austrian companies.

2022 CFMOTO 800MT Touring

Wheel sizes are 19-inch front and 17-inch rear – as a compromise for road and off-road riding – with the Sport tracking on cast wheels and the up-spec Touring on spoked wheels.

The rolling chassis is completed by fully adjustable KYB suspension, Spanish J.Juan radial brakes and a tubular steel frame.

2022 CFMOTO 800MT Sport

A range of impressive features are also included, such as a seven-inch TFT display with BT and navigation functions, cruise control, an adjustable screen, fog lights, crash bars, USB and 12V charging, as well as full LED lighting.

The CFMoto 800MT Touring adds a host of additional features for the $1000 premium, aiming to fill the needs of longer distance touring riders as the name suggests, with a tyre pressure monitoring system, heated seat and grips, centre-stand, up and down quickshifter, handguards, alloy bashplate, steering damper and keyless start.

CFMOTO 800MT Touring

Both models are also backed by a three-year unlimited kilometre warranty.

While the CFMOTO 800MT boasts similar performance figures to the KTM 790 Adventure the bike is a bit more road focused, with a heavier 225 kg claimed wet-weight figure, compared to the KTM’s 203 kg figure, while the Sport runs cast wheels, with spoked wheels found on the Touring version. Maxxis tubeless tyres in a 110/80 – 19in front and 150/70 – 17in rear.

2022 CFMOTO 800MT Sport

For more information check out the CFMoto Australia Motorcycles website, with exact availability dates still to be announced within Q4 of 2021.


2022 CFMoto 800MT Specifications

Engine Liquid-cooled, four-stroke DOHC parallel twin, 799 cc
Bore x stroke 88 mm x 65.7 mm
Engine Management Bosch EFI, Ride-by-Wire, Riding Modes (3)
Claimed Power 70 kW (95 hp) @ 8000 rpm
Claimed Torque 88N m @ 6600 rpm
Gearbox Six- speed
Final drive Chain
Clutch Slipper
Frame Steel tubular
Front suspension 43mm KYB upside-down fork, fully adjustable, 160mm travel
Rear suspension KYB monoshock, fully adjustable, 150mm travel
Front brakes Twin 320 mm discs with J.Juan four-piston radial calipers, ABS
Rear brake 260 mm disc with J.Juan twin-piston caliper, ABS
Wheels Sport – cast; Touring – spoked
Tyres Maxxis tubeless, 110/80-19 front, 150/70-17 rear
Wet weight 225 kg
Seat height 825 mm
Ground clearance 190 mm
Fuel capacity 19 litres
Dash 7 inch TFT
Features Cruise control, Fog lights, USB and 12-volt charging, LED lighting
Touring features Tyre pressure monitoring, Two-way quickshifter, Heated seats and heated grips, Centre-stand, Handguards, Alloy bashplate, Steering damper, Keyless start
Price Sport – $12,990 ride away; Touring – $13,990 ride away
Colours Sport – Starlight Black; Touring – Ocean Blue
Availability Late 2021
Warranty Three years, unlimited kilometres

Source: MCNews.com.au

Mandalika Circuit more than 80 per cent complete | Video Lap

Mandalika Circuit in Lombok

The Indonesian Tourism Development Corporation (ITDC), is targeting completion of the 4.3-km circuit with 17 corners to meet the specifications and pass the homologation test of the International Motorcycling Federation (FIM).

The Mandalika Grand Prix Association, the circuit’s promoter and operator, noted that as of mid-July this year, construction work on the circuit was 81.42 percent complete. Meanwhile, work on the run-off gravel, run-off grass, north tunnel and retaining wall, outer and inner service road, and concrete barrier installation was more than 95 percent complete.

Speaking on the construction progress, Kurniawan observed the circuit has not been able to meet FIM’s requirements since the paddock has not been built. “But even without the homologation qualification, Mandalika Circuit has been chosen by World Superbike (WSBK) to host the championship on November 14 this year, while the plan to host MotoGP had to be postponed until March next year.

Work on the circuit’s asphalt and track lane is expected to be finished by the end of July 2021, before FIM’s representatives inspect it for homologation, at least three months before the event, to determine the circuit’s eligibility as a venue for the world racing championship, he said.

To meet FIM’s requirements, the asphalt, run-off, pitstop, paddock building, health facility and helipad need to be completed and a hospital provided in the surrounding area. Once completed, Mandalika Circuit will be comparable to circuits such as Sepang, Malaysia and Chang, Thailand, already well-known as MotoGP venues, Kurniawan said.

Because Mandalika Circuit has a unique selling point: It is in the Special Economic Zone (KEK Mandalika), surrounded by beautiful beaches and the Indian Ocean. We will also add polish to make the circuit more accessible in the next four years,” he remarked.

Dorna Sports S.L. has designated Mandalika Circuit as one of the venues for MotoGP.

Forty garages have been made available within the circuit’s paddock area and the main tribune has been prepared to accommodate 50,000 seats, while the standing tribune will hold 138,000 people, Kurniawan informed. The circuit will also house hospitality suites for 7,700 people.

The paddock, main tribune, standing tribune and hospitality suites can be dismantled, and the circuit track can function as a normal roadway when there is no racing schedule, explained Kurniawan. Surrounded by panoramic hills and the beaches of South Lombok Island, the Mandalika Circuit would be the only street circuit made part of the MotoGP agenda.


This flyover lap of the circuit and its works was taken in early April

Source: MCNews.com.au

Alex Lowes extends WorldSBK contract with KRT

Lowes Re-Signs With Kawasaki Racing Team

Alex Lowes will remain an integral part of the Kawasaki Racing Team for the coming seasons, having agreed a new multi-year deal that will take him into his third year as an official Kawasaki WorldSBK rider.

KRT Manager – Guim Roda

Alex started with KRT during the Covid pandemic. He needed to learn quickly and concentrate on making championship points in those first three months; not easy. For 2021 he started the season strongly and we are all working to make those important steps to improve the performance of the overall package. We are so happy to have Alex and he is highly motivated to continue with the KRT project. With this two-year agreement we are convinced that we will now build on these firm foundations to create the strongest package with him, Marcel, his Crew Chief, the Ninja ZX-10RR and the entire KRT organisation.

Contract signing was witnessed by Mr Masatoshi Yoshioka, Director of Corporate Planning Division, Kawasaki Motors Europe

As well as returning as a full KRT Superbike rider next year Alex will also strengthen his bond with Kawasaki and his KRT squad as he and Jonathan Rea will be joined by 2021 Kawasaki superbike debutant, Lucas Mahias, to compete in the prestigious Suzuka 8 Hours race later this year.

With a race win and seven other podiums to his credit since he joined Kawasaki in 2019 Lowes continues to find a greater affinity with the new Ninja ZX-10RR, his team and his pit crew, led by Marcel Duinker.

Alex Lowes

I am really happy to have signed once more with the Kawasaki Racing Team, the most successful team in the current era of WorldSBK.

“After a strange first year in the team last year due to the global situation and with such a short season it has been good to start this year at some different tracks and I am understanding the bike a lot more. It has also been slightly frustrating this year because I feel like we started strongly but the results are not quite where we would want them to be right now. We have a lot of potential and I am still in the top four of the championship, close to the top three, which is the target for this year.

“I will be working hard for the next few weeks to make that next step to be regularly challenging for the podium. Honestly, I feel like it is close, so with this team and all these guys around me – with the relationships we have been building – everything is in place now to push things forward.

“I am really thankful to stay in the team next year, and proud of the faith that Kawasaki has shown in me. In our job there is a lot more that goes on behind the scenes than the results that you see on the track so I am really happy about this new deal with KRT. A massive thanks to all the guys behind the project, to Guim and Biel Roda, Steve Guttridge and all the people at KHI in Japan for believing in me again.”

Alex Lowes with Marcel Duinker

Source: MCNews.com.au

Workhorse Speed Shop to Reveal Two New Custom Indian FTR Builds

Workhorse Speed Shop to Reveal Two New Custom Indian FTR Builds
An inside look at the latest builds from Workhorse Speed Shop.

Brice Hennebert, owner of Workhorse Speed Shop, in Belgium, has been busy during lockdown. After creating Appaloosa V1.0 in 2019 for the Sultans of Sprint then re-working the Indian Scout build into Appaloosa V2.0 for the Baikal Mile Ice Festival, Brice has focussed his attention on building two special dream bikes based on the Indian FTR 1200

Rider Magazine: Indian FTR 1200 S | First Ride Review

The first build, Black Swan, is a 90’s sports bike concept utilizing the latest parts and materials to make it extremely sporty. The build extensively uses carbon fibre to minimize weight, Ohlins suspension, Beringer brakes, and modern additions such as a quickshifter. The second build, FTR AMA, is based on the 80s era AMA SBK race bikes and Rally cars, inspiring an angular design and will be finished in the classic Martini Racing livery

Workhorse Speed Shop to Reveal Two New Custom Indian FTR Builds
Adjustable Öhlins suspension and Beringer brakes are some of the premium parts making up the builds.

Black Swan and FTR AMA Build – Q&A with Brice Hennebert 

We caught up with Brice to get an insight into his latest projects, both of which are shaping up to be remarkably interesting, but quite different builds – just as we have come to expect from Workhorse. 

It’s been a long time since you came back from Russia after taking Appaloosa V2.0 to the Baikal Mile Ice Speed Festival – that must feel like a dream now, are the memories still strong? 

Yes, the memories are really strong. With the lockdown, it was some time after coming back from Russia that I saw many of my friends. Every time I reconnect with a friend they always ask about the trip. So, I get to relive the memories regularly and so they are still strongly alive.  

And when Appaloosa finally got back to Belgium after the Russian borders reopened, unpacking the bike and reassembling it meant I got to relive the memories all over again. 

Obviously, lockdown has changed the way we all work, but you have still been busy with brand-new builds based on the FTR. What are the concepts behind each project?  

The concept for the first build, Black Swan, came a few years ago when I was racing at Wheels & Waves against the Miracle Mike Scout built by The Young Guns. During that time, I had the vision to build a sports bike for road use. But, really sporty, built like a GP bike. It’s deeply inspired by 90’s sports bikes, all made from carbon fibre. That’s what happens when I have total freedom from the commissioners of a project. And I’m even thinking about doing a small series of this bike for sale. It’s pretty unique! 

Workhorse Speed Shop to Reveal Two New Custom Indian FTR Builds
Black Swan Build: building out the clay model.

The second FTR project is based on the 80s era AMA SBK race bikes and Rally cars. Black Swan and the FTR AMA project are for two brothers. The brother that commissioned Black Swan asked me to design a second build for his brother. Something colourful but sharp like a war tank. The only restriction was that it should have a Martini Racing livery. 

After a little research and brainstorming, the main influence became the Lancia Delta HF. I’ve mixed this with a bit of the early Bol d’Or race bikes and some muscle bike flavour keeping an upright riding position, close to the original FTR which works so well.  

With the Appaloosa v1.0 and v2.0 builds, you had some great partners providing advice, components, fabrication, and tuning skills. Who has stepped up for these FTR builds? 

All of them and even more. I went to the Akrapovič factory a few days after the Baikal Mile to work on the Black Swan exhaust. I crossed the border to go home for a few hours and they decided to close the border. That was tight. 

Öhlins have shipped me a full set of custom components for Black Swan, quite impressive I have to say. Beringer Brakes is also in the game on both bikes with their new 4+ system. Super light, super nice. 

I’m also working with Vinco Racing in Holland, Tim is taking care of all the CNC parts around both bikes. And there’s many of them. 

My buddy Robert Colyns from 13.8 Composite is taking care of the carbon fibre fabrication.  

On Black Swan, we will be fitting Rotobox carbon fibre wheels, they really are pieces of art! Liteblox Germany have made a bespoke carbon fibre battery for the bike, Cerakote Nl did all the black ceramic treatment. Jeroen from Silver Machine the seat works. Christophe from Forame design did all the 3D modelling from the Clay scan. 

Workhorse Speed Shop to Reveal Two New Custom Indian FTR Builds
Black Swan Build: Clay model ready for CAD scan.

The FTR AMA wheel set is a total eye catcher. I collaborated with Fabio from JoNich Wheels in Italy. The design is based on his Rush wheels but without carbon flanges. They are machined from billet aluminium. And the design made me think about the turbo fans wheels used on the racing Lancia, so that was a perfect choice. They are completed by a Dunlop GP tyre set with this mad 200 section rear tyre. 

So, as you can see, I’m not alone on this bike.    

We can’t reveal too much at this stage, but from the pictures from the builds so far, designing the bodywork seems to be a fairly intensive process. Can you walk us through the steps, from visualisation and sketches through to a finished piece of the bodywork?  

Yes, it’s quite a long journey, here’s roughly the stages for Black Swan: 

First, preliminary sketches and a compilation of reference pictures for the details. At this stage I’m drawing the main lines of the bike, the mood. 

Then I sent everything to Benny at Axesent in Japan to make proper renders in several versions, with realistic lighting and some livery ideas.  

When I was happy at this point, I started 3D modelling. I modelled the bike at full scale in clay directly on the FTR, but only on one side of the bike. This step took about 6 weeks, between the clay structure and perfecting the final shape.   

Then I scanned the bike in 3D to start the CAD modelling stage. The scan was used as a starting point to be sure of the proportions, but there was always freedom for new ideas. In the meantime, I worked on the symmetry, details, articulated parts, and assembly systems between the different elements. All told, another 2 months of work. 

The next step went to 13.8 Composites. Firstly, they 3D printed all the bodywork from the CAD models. These prints were used as a master for moulding and creating the die that the carbon fibre was laid into. 

Once done, adjustments were made between all the parts to be sure that it all fit together and looked perfect.  

With the FTR AMA build, rather than start with the clay, here I used direct CAD design based on a 3D scan of the FTR chassis. Then all the body parts were 3D printed and reinforced with carbon fibre. 

Workhorse Speed Shop to Reveal Two New Custom Indian FTR Builds
FTR AMA Build: Modified tail to accommodate twin shocks.

Is this a process that you have used before? You seem really keen, on every project, to try something new and expand your skill set.  

This was something totally new to me, at least at this scale. I have done clay shaping before, but not on something so complex. 

Workhorse Speed Shop to Reveal Two New Custom Indian FTR Builds
FTR AMA Build: “The wheel set is a total eye catcher.”
Workhorse Speed Shop to Reveal Two New Custom Indian FTR Builds

The bodywork is bound to be the main focal point when people first see the bikes, but what else can you reveal about the builds at this stage? 

The body of Black Swan is just 1.8 kg for the entire bike. I’ve also decided to fit a few accessories such as a quick shifter and Power Commander. The idea is to initially test the bike with the standard performance in the racing configuration (position, bodywork etc.) 123 hp is enough for road use today in Europe. And if the owner of the bike needs more power then we will go into the engine. 

On the FTR AMA, there are two aluminum fuel cells to reach a total capacity of 3.7 gallons with one of the tanks under the seat. Plus, the intake has been redesigned and 3D printed to work with DNA performance air filters. On the chassis side, the tail section has been modified to fit a twin shocks system powered by Öhlins. 

Plans are progressing on when and how the bikes will be revealed, but they will certainly make an impact. 

Yes, with the events calendar being difficult to predict over the last few months, we’ve had to come up with several plans. I really can’t wait to see the response to these two bikes. 

Workhorse Speed Shop to Reveal Two New Custom Indian FTR Builds
FTR AMA Build: Custom Exhaust

The post Workhorse Speed Shop to Reveal Two New Custom Indian FTR Builds first appeared on Rider Magazine.
Source: RiderMagazine.com

Bringing you the Best Motorcycle News from Around the Web!