Tag Archives: Yamaha

2019 Yamaha Tracer 900 GT Review | Motorcycle Tests

Tracer 900 GT Test By Wayne Vickers


What is a ‘sports tourer’ these days anyway? Is it still something that bridges the gap between full-on sports-bikes and long haul pillion-friendly tourers? At a time when said full on race-replica sports bikes are becoming a bit less relevant to a lot of road riders, you’d be forgiven for thinking that this category could be where a lot of the attention and demand is diverted towards.

Yamaha MT Tracer GT Review
Yamaha’s sports-touring Tracer 900 GT

I mean they make more sense right? Something that can commute comfortably, handle real world roads and potholes without breaking a sweat, take a weekend trip with the missus on the back and still hold its own against the average scratcher up your favourite set of twistys. So if that’s the brief, how does the Tracer 900 GT deliver?

First impressions when you sit on board are that it’s really quite an upright seating position, nice and slim between your knees too. The seat is firm, but not too hard, and it feels angled slightly forward, positioning the rider close to the tank.

Yamaha Tracer 900 GT
Yamaha Tracer 900 GT controls

Steering and controls are impressively light (especially the superb action of the slipper clutch), and when on the move you are first struck by how nimble it feels. It’s almost dirt-bike like in its agility and feel. Plenty of steering lock too.

This is a bike that revels amongst traffic. Sure the bars are fairly wide, but not overly, so it’s a breeze to filter between lines of traffic on. And when you take the admittedly quite nice panniers off its an even slimmer profile..

There’s ample weather protection without it being over the top. Plenty to tuck in behind if you’re really getting belted down upon (which I did more than once this Melbourne Winter), but more often than not you’re comfortable sitting up – its almost an adventure bike riding position – fairly well protected from the wind and any light rain by the nice high screen.

Yamaha MT Tracer GT Review
A generous front screen and fairing setup offers good wind protection on the Tracer 900 GT

The front cowl does a nice job of keeping the weather off your legs and the heated grips (my single favourite discovery in the past five years), work a treat. I’m not a massive fan of the scroll wheel controller on the right cluster that you need to use to turn them on, and then cycle through the three settings, but it works.

I’m just philosophically against having those type of controls, the ones that you do use when on the move, on your throttle hand side. Just for further clarity, the scroll wheel also cycles through your displays on the dash, changing from trip meter to temp etc, so to adjust the heated grip settings if you have it showing trip meter (which I assume most riders would), you need to do the following:

  1. Scroll twice to get it to heated grip selection,
  2. Push the scroll wheel in to select it,
  3. Scroll through the settings to find the one you want,
  4. Push again to lock it in,
  5. Scroll back the other way twice to get the trip meter back on the display…
Yamaha MT Tracer GT Review
Right switchblock controls on the Tracer 900 GT with scroll wheel controller and colour TFT display

All with your right thumb, slightly further than you can comfortably reach without shifting your throttle hand. It’s not ideal. Given that you can’t change ride modes or Traction Control (TC) settings on the move (those controls are on the left cluster), I don’t see why those sets of controls aren’t just swapped so the ones you can change on the move are on the left cluster.

Other electronics work fine (including the cruise control), I reckon most riders will stick with the ‘STD’ map and traction control set to 1, they’re fine – the others are the buzzkill modes. My only other niggle here is that I reckon the TFT screen is a bit on the small side.

Maybe my eyes aren’t what they used to be (I mean I’m not that old..), but my instant reaction when I first turned it on was to squint. Those minor niggles aside – it’s comfy, nimble and offers good weather protection. That’s a tick from an all year commuter point of view.

Yamaha MT Tracer GT Review
Fully adjustable forks in gold are part of the 900 GT package

Suspension wise its ever so slightly on the firm side without being harsh. I reckon it’s on point. Along with the colour coded side panniers mentioned earlier, the GT also gets fully-adjustable upside-down KYB forks. The rear shock is adjustable for rebound damping and the preload is remotely adjustable. Both ends work a treat with good feedback, while being more than capable of soaking up the everyday ordinariness that we’re served up as roads. Surface changes? Patches? Potholes? No drama. I reckon it would be more than up to remaining enjoyable even with a pillion and luggage.

The pillion is well catered for with sturdy grab rails and a seat that’s not towering above the rider – and those panniers are easy to get on and off from their mounts and offer a generous amount of space inside (22 litres each apparently). Plenty of space for an overnight trip for instance. I was getting 300km from a tank in cruise mode, a bit less when getting up it. It would be a very easy thing to clock up a couple of tanks on in a day.

Yamaha MT Tracer GT Review
A generous rider and pillion seat ensure comfort on the Tracer 900 GT with grab rails and panniers

And there’s plenty of power to handle two-up, fully-loaded pannier duties. I’m a big fan of the MT-09 triple and gearbox. The same drive-line that provided the shove for the somewhat unusual Niken I tested earlier this year, shines even moreso in the Tracer (where its pushing along a lot less bulk). It’s a gem.

Apparently its slightly more civilised than the original incarnation, but still offers plenty of character and ample grunt. It’s smooth from the bottom and just builds into a nice growl on the way through to its 11,500 redline. The bike punts out about 115 ponies at 10 grand, but peak torque arrives at just after 8.

I didn’t find myself often past peak torque to be honest as the mid-range is where it’s at with this one. The six-speed box’s quickshifter is basically flawless too. I found myself clutching past neutral and when changing at low revs just to smooth things out – probably more from habit than necessity – but once past a few thousand revs I didn’t bother with the clutch as its smoother than a smooth thing.

Yamaha MT Tracer GT Review
A quickshifter is standard fitment on the Tracer 900 GT with the triple-cylinder engine and six-speed gearbox worthy of note

Doesn’t matter if you’re shifting at full or part throttle it just does its business. Brilliant. Still pretty happy to lift the front for some hijinx too… Love it. Could do with a bit more bark from the snug exhaust to my ears, but I like ‘em a bit loud.

The ABS stoppers work just fine and feel about the right spec for the overall package, they have a solid initial bite and more than enough power, while the lever offers plenty of feel and feedback. No problems there at all.

So all in all the ‘real world roads’ and ‘pillion duties’ boxes get ticks as well.

So what’s it like to punt along at pace? It’s a surprisingly good thing actually. Initially the seat felt a bit unusual with its forward slant – but it only took half-a-dozen corners on the Deans Marsh – Lorne run, I was starting to get along with it pretty well.

Yamaha MT Tracer GT Review
Performance is admirable with scratching potential in the right conditions

Even though the roads were still a little damp and there was quite a bit of bark around, I was punting along at a reasonable pace in no time. Certainly not limited by the bike. I did find that when I put the balls of my feet up onto the pegs then the heels of my boots would hit the pillion peg mounts. That was a bit off-putting, but it didn’t actually really get in the way. I wear a size 9 A-Stars Toucan for what it’s worth (great boots btw).

The suspension gave me enough confidence to explore the limits to what I dared on the not so grippy surface. We didn’t get to peg down territory in the damp but probably wouldn’t have been far from it in the sections that were fully dry.

With even better rubber and a warm grippy road I reckon you could frighten a few sports bike riders. The suspension is up to it, without being proper top shelf stuff. I’d say all in all it strikes a pretty good balance between a surprisingly comfortable tourer and a decent scratching proposition. So the ‘sports’ part of the equation also gets a tick.

Yamaha MT Tracer GT Review
The Tracer 900 GT delivers as an ideal blend of sports and touring performance for an all-rounder

I really do like the Tracer GT as an all-rounder. It’s quite a capable thing. It looks pretty decent to my eye too. I had plenty of positive comments from Joe public and riders alike when taking the pics. Great engine, great chassis and decent suspension. It is reasonably priced at just over 20k ride away, no more to pay, complete with panniers and the improved suspension over the base Tracer. It’s certainly a worthy option. A louder can and sportier rubber would liven it up even further.

Last thought is that I also can’t help but imagine what this bike might be like with another inch or more of travel, spoked rims with a full size front, and a redesigned exhaust for some more ground clearance. It feels quite like an F 850 GS at times with an even better engine, so much so that it couldn’t be that hard to turn it into a ripping mid-size adventure bike.. And that’s high praise as I rate the GS highly.

Yamaha MT Tracer GT Review
I do wonder how the Tracer 900 would convert into an adventure machine…

I’d wager the triple could have even more character than the soon to be released little Tenere, but I’ll have to wait to see if I get to throw a leg over one to know for sure. Is there room in their lin-eup for two adventure platforms? Probably not. Pity. Wonder if someone with some time on their hands might do a custom using Tenere bits.. If you do, let me know – I’d like to check it out 🙂


Why I like it:

  • Sports-tourer with an almost adventure bike upright riding position
  • That MT-09 triple donk and box remains a ripper
  • Super nimble steering amongst traffic
  • Strikes a good mix between scratcher and mile eater

I’d like it more if:

  • The scroll wheel controller is a bit awkward and the TFT dash could be bigger
  • A little more footroom from the pillion peg mounts would be nice
  • Another 50-kays range wouldn’t hurt
  • More growls from the exhaust please Yamaha-san

Yamaha Tracer GT
Yamaha Tracer 900 GT
YAMAHA TRACER 900GT (MT-09TRGT)

YAMAHA TRACER 900 GT

Specifications
Engine Type L-cooled, 4-stroke, DOHC, 4-valve, 3-cylinder
Displacement 847 cc
Bore x Stroke  78 x 59.1 mm
Compression Ratio 11.5 : 1
Lubrication System  Wet Sump
Fuel Management Fuel Injection
Ignition TCI
Starter System  Electric
Fuel Tank Capacity 18 L
Final Transmission Chain
Transmission Constant mesh 6-speed
Frame Type Diamond
Suspension F  Telescopic forks, 137mm travel
Suspension R Swingarm (link suspension), 142 mm travel
Brakes Front Hydraulic dual discs, 298 mm
Brakes Rear Hydraulic single disc, 245 mm
Tyres Front 120/70ZR17 M/C (58W) Tubeless
Tyres Rear 180/55ZR17 M/C (73W) Tubeless
Length 2160 mm
Width 850 mm
Height 1375 / 1430
Seat Height 850 mm / 865 mm
Wheelbase 1500 mm
Ground Clearance 135 mm
Wet Weight 227 Kg
Price $20,349 Ride Away no more to pay

Source: MCNews.com.au

Yamaha WR250F all new for 2020

WRF Yamaha Action
2020 Yamaha WR250F

In the late 90s Yamaha Australia staff built the enduro bike before taking that TT-R based machine to Japan where they then pleaded with Yamaha HQ to build them a new type of truly high-performance four-stroke enduro bikes. 

Originally launched as a 2001 model, the high performance quarter litre enduro racer was developed for Australian conditions by legendary ISDE competitor Geoff Ballard alongside YMA enduro riders Steven Cotterell and Peter Payne. The current model retains its antipodean connection by continuing development under Peter Payne with assistance from former world MX rider Josh Coppins.

WRF Yamaha Action
2020 Yamaha WR250F

And now for 2020, WR250F is closer than ever to the industry leading YZ250F and the cross-country racing YZ250FX. All three models are based on the same platform but with significant differences that suit the type of riding for which they have been designed.

WRF Yamaha Action
2020 Yamaha WR250F

The goal for the new WR250F was to provide superior handling and increased steering precision while retaining high speed stability. And to create a slimmer and lower machine that inspires more confidence with a lighter feeling.

WRF Yamaha Action
2020 Yamaha WR250F

Thorough testing has revealed that the new machine has surpassed this goal by allowing super easy direction changes with high levels of manoeuvrability. Power is stronger at all levels and delivered in a linear fashion with excellent traction characteristics.

WRF Yamaha Action
2020 Yamaha WR250F

2020 Yamaha WR250F at a glance

  • New engine based on current YZ250F motocrosser but with specific enduro settings
WRF Yamaha Detail
2020 Yamaha WR250F
  • New free flow air filter, reduced resistance with increased reliability
WRF Yamaha Detail
2020 Yamaha WR250F
  • New smartphone tuning – On board WiFi allows engine to be tuned to different track conditions
WRF Yamaha Detail
2020 Yamaha WR250F
  • New engine map switch – Map button allows mid-ride changes to power delivery
WRF Yamaha Detail
2020 Yamaha WR250F
  • New lighter, tougher clutch – Easier lever pull with greater longevity
WRF Yamaha Detail
2020 Yamaha WR250F
  • Wide‐ratio 6‐speed transmission
WRF Yamaha Detail
2020 Yamaha WR250F
  • Mass centralised starter system – Lightweight starter motor
WRF Yamaha Detail
2020 Yamaha WR250F
  • Frame is based on all conquering 2019 YZ250F but flex-tuned for enduro riding
WRF Yamaha Detail
2020 Yamaha WR250F
  • Lower, flatter seat and slimmer ergos
WRF Yamaha
2020 Yamaha WR250F
  • YZ250F spec KYB air-oil-separate upside-down front fork and rear shock sport model-specific enduro settings
WRF Yamaha Detail
2020 Yamaha WR250F
  • Bigger bashplate – Increased protection for water pump and hoses
WRF Yamaha Detail
2020 Yamaha WR250F
  • Larger fuel tank – 7.9-litre plastic resin fuel tank (up by 400 ml)
WRF Yamaha Detail
2020 Yamaha WR250F
  • 115kg wet weight including full fuel tank (down 3 kg)
WRF Yamaha Studio
2020 Yamaha WR250F
  • New forged aluminium sidestand
WRF Yamaha Detail
2020 Yamaha WR250F
  • Sleek new headlight cowl
WRF Yamaha Detail
2020 Yamaha WR250F
  • New stronger front axle brackets
WRF Yamaha Detail
2020 Yamaha WR250F
  • Lightweight speed sensor with high-precision display inlcuding fuel level
WRF Yamaha Detail
2020 Yamaha WR250F

High performance YZ250F-based engine

The YZ250F has proved to be one of the most competitive motocross bikes at every level. US rider Aaron Plessinger won the 2018 AMA Pro National 250MX series and the model once again dominated in AUS by scooping both the 2018 MX2 Nationals with Wilson Todd and the MXD class with Bailey Malkiewicz. This success is reflected in the off-road racing world with Luke Styke the reigning 250cc class Australian Off Road Champion.

WRF Yamaha Detail
2020 Yamaha WR250F

The new WR250F engine is based closely on the winning fuel-injected YZ250F design, and features a rearward-inclined cylinder and reverse cylinder head. Its airbox is situated in front of the rider and the fuel tank located at the centre of the bike – a unique configuration that contributes to the bike’s mass centralisation, which plays a pivotal role in achieving light and agile handling.

WRF Yamaha Detail
2020 Yamaha WR250F

In addition, the WR250F’s reverse cylinder head allows the use of a straight air inlet for higher levels of intake efficiency, and by locating the fuel tank centrally, this innovative design permits the use of a long and flat seat that allows the rider to shift their body weight quickly and easily.

WRF Yamaha Studio
2020 Yamaha WR250F

The 2020 WR250F features a new high compression forged aluminium piston, revised valve angle and exhaust cam timing with revised balance factor – all based on the current YZ250F, but with enduro specific settings to provide a high level of winning performance. That performance is further boosted by the fitment of a dual electrode spark plug and revised exhaust muffler for 2020.

WRF Yamaha Detail
2020 Yamaha WR250F

Compared to the former WR250F engine, the 2020 design is more powerful at higher rpm, and also delivers stronger power right through the rev range.

The filter element features reduced airflow resistance and intake noise combined with increased reliability. The new filter and the length of the intake funnel contribute to an excellent feeling of traction and linear characteristics during acceleration and deceleration. Plus, dust filtering capability is increased by adding rubber seals to the centre positioning pin.

WRF Yamaha Detail
2020 Yamaha WR250F
Lighter, tougher clutch

The 2020 WR250F is equipped with a 6-speed transmission that is designed to handle a wide variety of terrain, from technical rock climbs to full throttle blasting along forest tracks. A new lighter and tougher clutch is now mated to the box to match the extreme demands of enduro riding. Featuring new heat resistant friction plates, this durable clutch has a super light lever pull and is built to perform consistently and effectively for long periods in the toughest terrain.

WRF Yamaha Detail
2020 Yamaha WR250F
Mass centralised starter system

A lightweight starter motor contributes to mass centralisation. Also, a garter spring is adopted for the spring of the one-way starter clutch in order to reduce horsepower loss – a 60% reduction in load compared to the outgoing model.

WRF Yamaha Action
2020 Yamaha WR250F
New smartphone tuning

On board WiFi means that you can tune the new WR250F to different track conditions using your smartphone. A downloadable Power Tuner app allows you to make fuelling and ignition timing changes instantly and upload/share them for the ultimate in track-side tuning. The free Yamaha Power Tuner app also allows owners to record ride/race log information and monitor a range of data such as maintenance and system diagnosis, engine run time and more.

The on board WiFi is available thanks to a Command Control Unit (CCU) that contacts the ECU and forms part of the free competition kit offered to Australian customers.

WRF Yamaha Action
2020 Yamaha WR250F
Engine map switch

A bar-mounted dual engine map switch has been adopted and positioned next to the left lever to enable changes in the engine power delivery characteristics mid-race. This switch allows the rider to select one of two engine maps on the fly at the press of a button to cater for changes in the riding environment.

This means that when the going gets loose, steep or muddy – high traction can be accessed at the press of a button.

WRF Yamaha Detail
2020 Yamaha WR250F
Sharp handling YZ250F bilateral beam frame

WR250F now runs the same bilateral beam frame as the sharp handling current model YZ250F. To achieve a rigidity balance with the amount of flex needed for enduro riding, the engine mount brackets have been altered. The upper-side mounts are the same as on the YZ250F, while two-plate type mounts are used for the front-side mounts.

The result contributes to the machine’s excellent feeling of contact with the ground and offers feedback about the riding surface while providing a light feel to the handling.

WRF Yamaha Detail
2020 Yamaha WR250F
Industry leading front and rear suspension

WR250F runs the same KYB air-oil-separate closed chamber upside-down front fork as the YZ250F but with model-specific enduro settings to provide stable damping force. This suspension is acknowledged to be the best available on a production dirt bike and responds particularly well during the transition between the compression and rebound strokes. And because the suspension holds up well in the stroke, ground clearance is improved over the outgoing model.

WRF Yamaha Detail
2020 Yamaha WR250F

The outer tubes are the same as the YZ250F and contribute to a secure feeling of ground contact. The mid-speed valve (MSV) that provides damping in the mid-speed range has been changed from a coil spring type to a leaf spring type. This mechanism responds to even the slightest amounts of oil flow and so delivers excellent damping feel at low speeds.

WRF Yamaha Detail
2020 Yamaha WR250F

The rear shock absorber is also based on the YZ250F unit and features enduro model-specific settings. It features a coil with a higher fatigue strength than the current model’s and with an 11.5mm wire diameter achieves a weight reduction of approximately 350 grams. The capacity of the reservoir has been increased by 30cc to run cooler and achieve a more stable damping force.

WRF Yamaha Detail
2020 Yamaha WR250F
More protective bashplate

The new WR250F features a more protective plastic resin engine guard to help prevent damage to the frame, engine, water pump and hoses when running through ruts or from impacts by kicked up rocks. Also, reducing the size of the open space at the front limits the amount of mud and stones entering and so reduces additional running weight.

WRF Yamaha Detail
2020 Yamaha WR250F
Larger fuel tank

A newly designed 7.9-litre plastic resin fuel tank is featured that reduces the frequency of refuelling during longer distances. The current YZ250F’s tank was used as the developmental base, and the lower portion has been extended toward the centre of the bike to improve mass centralisation, and to increase the tank’s capacity.

A compact fuel pump is another new feature. These changes have made it possible to achieve a slim, compact body design comparable to the YZ250F that also results in minimum interference with the riding position.

WRF Yamaha Detail
2020 Yamaha WR250F
Flatter, lower seat

A redesigned seat with stiffer seat foam is fitted to aid rider manoeuvrability and to make getting on and off the bike easier. A slimmer design through the shroud/knee contact area helps further improves rider ergos.

WRF Yamaha Studio
2020 Yamaha WR250F
New forged aluminium sidestand

A lighter and less obtrusive forged aluminium sidestand is positioned to ensure plenty of ground clearance when riding through ruts and the like. The new stand sits higher and the amount it juts out from the chassis is reduced which helps prevent snagging. The weight of the stand has also been reduced by about 100g. This is the same as the 2019 model YZ250FX stand design.

WRF Yamaha Detail
2020 Yamaha WR250F
Sleek new headlight cowl

The WR250F’s new headlight cowl sits lower and closer to the rider. It contributes to centralisation of machine mass and helps to create a light, agile impression for the machine.

WRF Yamaha Detail
2020 Yamaha WR250F
Lightweight speed sensor with high-precision display

A new lightweight front wheel speed sensor connects to a highly precise speed display and with no more speedo drive, makes front wheel changes easier. The system features a pulse wheel and sensor system known for excellent reliability and provides the detailed speed information essential for enduro riding. Display includes low fuel warning light.

WRF Yamaha Detail
2020 Yamaha WR250F

Off road competition kit

For the Australian market, the new WR250F is supplied fully ADR compliant and in road registerable condition. A free competition kit is supplied and can be easily fitted for closed course use. The kit includes:

  • CCU for smartphone tuning capability
  • Lightweight LED tail light/ and licence plate holder
  • Competition larger diameter exhaust muffler outlet
  • Full power / full travel throttle stopper screw kit
  • YZ airfilter holder guide
  • Wiring connector for headlight
  • Brake snake kit
  • Wiring connector for rear brake light
  • WRF Barkbuster handguard set
WRF Yamaha Action
2020 Yamaha WR250F

2020 Yamaha WR250F Specifications

Engine type Liquid cooled, 4-stroke, DOHC, 4-valve
Displacement 250 cc
Bore x stroke 77.0 x 53.6 mm
Compression ratio 13.8 : 1
Fuel delivery Fuel Injection
Starter system Electric
Transmission system Constant mesh 6-speed 
Final Transmission Chain
Frame Flex tuned aluminium bilateral beam type
Front suspension 48mm twin chamber KYB, 310 mm travel 
Rear suspension Coil spring/gas hydraulic damped KYB, 317 mm travel
Front brake Hydraulic single disc,  270 mm
Rear brake Hydraulic single disc, 245 mm
Front tyre 90/90-21 54M tube type
Rear tyre 130/90-18 M/C 69M M+S tube type
Overall length 2175 mm
Overall width 825 mm
Overall height 1270 mm
Seat height 955 mm
Wheel base 1480 mm
Ground Clearance 320 mm
Wet weight (including full oil and fuel tank) 115 kg
Fuel tank capacity 7.9L
Colour Team Yamaha Blue and White
Warranty Three months, parts only
Ride away price (includes freight, pre-delivery and all on road costs) $13,999 inc GST*
Availability TBA

Source: MCNews.com.au

2019 Yamaha FJR1300 Review | Motorcycle Tests

FJR1300 Test By Wayne Vickers


The smallest things can transform a riding experience. I’d been riding the big FJR a few days with the screen at its highest setting, which is bloody tall and offers enviable protection from the cold wind of a Melbourne winter. It was a huge welcome in my long commute each day but made the bike feel a little awkward to corner at speed. I couldn’t really decide where to position my upper body, how far to lean forward. The issue was the visual distortion from the top of the screen, as you dip in and out from behind the curved ‘glass’. I couldn’t get comfortable with my vision behind the screen and sitting up to see over it felt barking mad.

Yamaha FJR
2019 Yamaha FJR1300

I’d let it go a few days before exploring the doo-dads. Then I discovered one of the aces up its sleeve is that you can adjust the height of the screen at the touch of a button. On the move. Boom. In a couple of seconds it will drop from full height to its lowest setting and then you’re free to position yourself naturally for corners – it all made sense from there. Instant perception change. Loved it.

Yamaha FJR
Yamaha FJR1300 switchgear

There’s something to be said for a ‘full bodied’ bike. I like its scale. It’s a welcome departure from tiny bikes built for little folks. I’m no giant – I’m only 6ft, but felt quite at home on the big FJR. Feels roomy without being too big. Nice to move about on. There’s no denying that its carrying a bit of weight. It’s noticeable when walking it around and shuffling out of parking spots; It scrapes in just under the 300-kilogram mark wet after all, and you probably need to pay a bit more attention to your parking spots to make sure you won’t be pulling/pushing it uphill for any serious distance. But it’s not cumbersome. And the anti-stall idle system works quite nicely when you want to let it do the work for you while walking it about in a tight parking lot.

Yamaha FJR
2019 Yamaha FJR1300

Styling wise it’s a nicely finished thing. Lots of nice details here and there, good quality materials and with the two big hard bags on the side it certainly looks every inch the part of being a rapid modern tourer.

Yamaha FJR
Yamaha FJR1300

First impressions when you sit on it are that its low, long and wide between the legs. Comfy though. The seat really is quite wide which does make you spread the legs out a bit more than you’d expect, but you get used to it after a few days. And the steering lock is great so while the wheelbase is a bit stretched-limo you don’t notice it too much. Quite good low speed maneuverability really.

Yamaha FJR
Yamaha FJR1300

Pillions are well catered for with a big comfy seat and grab rails. Riding position was a bit of a surprise – it’s even more upright than I expected. No need to put any real weight on the wrists if you don’t feel like it.

Yamaha FJR
2019 Yamaha FJR1300

On the go the steering is nice and light and the angled bar risers not only feel comfortable but let the controls feel naturally positioned. Being a sports-tourer the brief is all about stability and comfort at speed – and it nails it. This is a jet on an airbed. A cruise missile if you will. Well tuned damping action from both ends works a treat to soak up regular road imperfections and let you just enjoy the ride. All while giving you plenty of feedback, encouraging you to twist the throttle that little bit harder… It’s mind boggling how well the big girl handles being punted along with a bit of spirit, I had to occasionally reign myself in… Its proper fast on sweepers as you might expect, but even seems to handle slower corners pretty well. All very predictable and sure footed. And when the road opens up and you allow the afterburners to kick in, you’re catapulted to big numbers.

Yamaha FJR
Yamaha FJR1300

Speaking of catapults, the engine is like opening the taps on a pressure valve. From as low as 2 grand there’s seamless shove – and it doesn’t dip or tail off it just gives more. The fuelling is excellent – No hesitation or coughs or burbles, just.. thrust. We’re talking 135 odd Nms of torque. Great gobs of it.

Sure it doesn’t have the urgency of something lighter but it sill delivers effortless, relentless poke. It’s the heart and hero of the bike for sure. It comes with two ride modes, Touring and Sport. Touring softens things up quite a bit and I did use it to start with and in the rain, but I mostly left it in Sport to enjoy the hump.

Yamaha FJR
2019 Yamaha FJR1300

There’s a plethora of suspension settings too, some adjustable on the go. Electric settings for preload to adjust for one rider, luggage, two, two and luggage as well as soft, standard and hard settings. They all made slight differences that were definitely felt. I actually enjoyed riding it with the pre-load set to two riders on the standard damping. Soft setting was quite nice on the smooth highway too…

Yamaha FJR
Yamaha FJR1300

I felt that the brakes could be a little stronger though. They didn’t catch me out anywhere, I just felt that a big heavy bike with that much poke could have some more stopping power to balance things out. Lever feel is ok, but needs a decent squeeze to really get the picks working their hardest. And yes the ABS works just fine, even on gravel.

Yamaha FJR
Yamaha FJR1300

Clutch feel is nice and light, the box shifts were all fairly solid, but it’s not the smoothest shift I’ve ever ridden. They went in. And there was never any massive clunks or false neutrals, but compared to other Yamaha gearboxes it suffers a little in refinement. Either way, I got used to it.

Yamaha FJR
Yamaha FJR1300

More on the other doo-dads: heated grips have 3 settings for toasty warm mits, cruise control is easily set on the left hand side and the mode switching for the dash to cycle through control sets is done via what used to be the ‘flash’ button on the front of the left button block. All of it is intuitive and easy to control, even at night time.

Yamaha FJR
Yamaha FJR1300

The LCD dash design itself is probably starting to look dated but is still nice and legible. And it has a distance to empty meter! (one of my pet hates is how many modern bikes don’t). I was enjoying that right up until.. it disappears with about 35ks left in the tank when you need it most and is replaced with a counter that starts counting fuel used from the start of reserve. I’ll need the decision making process behind that design explained to me I think… Just leave the distance to empty there!!

Yamaha FJR
Yamaha FJR1300

Speaking of fuel though, loved the big range. Comfortably into the mid 400’s for me on my regular route. Which just confirms it as a proper mile eater – a genuine sports tourer.

Yamaha FJR
2019 Yamaha FJR1300

2019 Yamaha FJR1300 at a glance

Why I like it:

  • All the hump. At any revs. Relentless torque.
  • Super comfy, nice and roomy
  • Superb ride, surprisingly capable at speed even on tighter stuff
  • Big Range
  • Excellent pillion accomodations

I’d like it more if:

  • I reckon it could have more powerful stoppers
  • Gearbox could be a little more refined

Yamaha FJR
2019 Yamaha FJR1300

2019 Yamaha FJR1300 Specifications

Specifications
Engine Type  Liquid-cooled, 4-stroke, DOHC, 4-valve, forward-inclined parallel 4-cylinder
Displacement 1298 cc
Bore x Stroke 79.0 x 66.2 mm
Compression Ratio 10.8 : 1
Lubrication System Wet sump
Fuel Management Fuel Injection
Ignition TCI
Starter System Electric
Fuel Tank Capacity 25 L
Final Transmission Shaft
Transmission Constant mesh 6-speed
Frame Type Aluminium Diamond
Suspension Front Telescopic forks, 135 mm travel
Suspension Rear Swingarm (link suspension), 12 5mm travel
Brakes Front Hydraulic dual discs, 320 mm – ABS
Brakes Rear Hydraulic single disc, 282 mm – ABS
Tyres Front 120/70ZR17M/C (58W) Tubeless
Tyres Rear 180/55ZR17M/C(73W) Tubeless
Length  2230 mm
Width  750 mm
Height  1325 / 1455 mm
Seat Height  805 mm / 825 mm
Wheelbase 1545 mm
Ground Clearance 125 mm
Wet Weight  292 Kg
RRP Ride Away $30,649 

Source: MCNews.com.au

2020 Yamaha YZ250X | Two-stroke enduro from Yamaha


For those riders that favour a non European option in the enduro marketplace the options are few and far between. Yamaha are giving Aussies riders a Japanese alternative for the bush with the 2020 iteration of their YZ250X arriving into the Australian market at $12,299 including GST.

Yamaha YZX
Yamaha’s two-stroke 2020 YZ250X

Offering Yamaha’s trademark reliability and durability, the 2020 YZ250X delivers classic two-stroke performance for the enduro racer, alongside a lightweight aluminium double-cradle frame and swingarm, fully-adjustable KYB closed chamber USD forks and a fully-adjustable high-performance KYB rear shock absorber.

Yamaha YZX
The YZ250X features a lightweight aluminium double-cradle frame

The 2020 YZ2250X has been specifically tuned for cross-country racing to deliver performance, alongside light, nimble and precise handling.

Yamaha YZX
KYB USD forks and shock are fully adjustable on the 2020 YZ250X

The two-stroke enduro racer is powered by the same 249cc, reed-valve inducted engine as Yamaha’s legendary YZ250X motocross machine, with a compact exhaust system for clearance on tight technical trails, and a wide-ratio five-speed transmission.

Yamaha YZX
The 249cc two-stroke reed-valve inducted powerplant

Compression ratio, exhaust port, power valve timing, and model-specific CDI unit are all designed for improved trail performance, with a focus on delivering a wider and more controllable power delivery in comparison to its more highly strung motocross cousin.

Yamaha YZX
Australian 2020 YZ250X models include an off-road kit for rec rego

Australian-delivered YZ250X models are fitted with an off-road kit that makes the bike eligible for the recreational registration scheme that is available in some states. The kit includes front and rear lights, handguards, horn, mirror, braided steel front brake line and number plate hanger.

Yamaha YZX
A 245mm rotor is found on the rear with a 270mm front, with wheels clad in Geomax AT81 tyres

Braking duties are handled by a 270mm/245mm hydraulic disc braking package in combination with high-performance pad material for exceptional stopping power and controllability in tight wooded trails.

Yamaha YZX
2020 Yamaha YZ250X

Enduro-specific Dunlop Geomax AT81 tyres are fitted, offering an 18-inch rear with a taller sidewall for improved comfort and helping reduce pinch flats. The 2020 YZ250X is available now at Yamaha dealers for $12,299 incl GST.


2020 Yamaha YZ250X Specifications
Engine type: Liquid-cooled, two-stroke, reed valve induction
Displacement: 249cc
Bore x stroke: 66.4 x 72.0
Compression ratio: 7.9 – 9.4 : 1
Fuel delivery: PWK38S Keihin
Starter system: Kick
Transmission system: Constant mesh five-speed
 Final Transmission: Chain
Frame: Aluminium control filled semi double cradle
Front suspension: Telescopic forks, 300 mm travel
Rear suspension: Swingarm (link suspension), 315mm travel
Front brake: Hydraulic single disc,
270 mm
Rear brake: Hydraulic single disc,
245 mm
Front tyre: 90/90-21 54M Tube type
Rear tyre: 110/100-18 64M Tube type
Overall length: 2180 mm
Overall width: 825 mm
Overall height: 1285 mm
Seat height: 970 mm
Wheel base: 1480 mm
Ground Clearance: 355 mm
Wet weight: 104 kg
Fuel tank capacity: 8.0L
Colour: Team Yamaha Blue and White
Price: $12,299 incl GST

Source: MCNews.com.au

Alien Yamaha Niken three-wheeler will surprise

Yamaha’s Niken GT three-wheeler looks like an alien, but it corners surprisingly well, says Motorbike Writer contributor Todd Parkes.

When I first set eyes on the Yamaha Niken, I imagined an alien would ride one of these monsters.

This bike is pretty much an MT-09 with two very skilfully engineered front wheels grafted to what would have normally been the pointy end.

Piaggio and other scooter manufacturers (Yamaha’s Tricity included) have proved this concept of ‘doubling’ the front end grip of a cycle.

How many times have we watched motorcycle racing and witnessed a front end loss? The front wheel ‘tucks’ up and chucks its hapless rider down the road.

I tested the original Piaggio MP3 when released, and it was the most sure footed thing I’d ever ridden.

Niken GT testAlien Yamaha Niken GT

So, can the three-wheeled Niken service it up to its two-wheeled counterparts?

Apparently it can top around 210km/h and was a full second quicker than its MT-09 sibling, around Yamaha’s test track.

The bike I tested was the $24,478 (+ on-road costs) Niken GT and it can certainly live up to the Grand Tourer standard. It has heated grips, cruise control, touring screen, panniers, shift indicator, selection of three sport modes, traction control, ABS, side and centre stands, comfortable seating position, and wide handle bars.

There’s a six-speed transmission, a 847cc DOHC triple developing 86kW (115HP) at 10,000rpm, kerb weight of a hefty 263kg and high 820mm seat.

The 18 litre fuel tank will give a comfortable range of 300km before the reserve counter kicks in, depending on the engine mode used and how heavily you twist the throttle.

No lessons required

Sitting behind the handle bars gives no indication of what’s in front of you. The fairing may be a bit wider but apart from that nothing seems any different from a standard motorbike.

There is no requirement for tuition on how to ride the Niken. A Can-Am Spyder, outfit or even a trike needs a skill set outside that for riding a normal motorcycle.

You ride a Niken in the exact same way you ride any other bike.

The only differences are a slight noticeable ‘drag’ at slow speed, you can brake later into corners using more front brake and right hand U-turns are a piece of cake. You can even drag the front brake without pulling yourself down.

You do need a side stand and it will fall over if you don’t hold it up.

There are no fancy hydraulics, electronics or sensors, just plain old good quality mechanical engineering.

The mirrors are well positioned and offer good rear and side views without being filled with the rider’s shoulders or arms.

They can be difficult to adjust being so far forward, however, they are positioned in such a way that there is little need to shift the eyeline from the road ahead.

The instrumentation, mirrors and view ahead are virtually all in the same line of sight.Alien Yamaha Niken GT

Stability

The one constant while riding this bike is, stability. High speed, low speed, wet grass, gravel, uneven surfaces or cornering, it’s all the same.

There is a complete feeling of confidence that the bike will stay on track and be completely controllable.

I threw it at everything I could think of and it felt like it was on rails at all times. I reckon I’d have to do something completely stupid or idiotic to throw it down the road.

Both front tyres are still planted firmly on the road by the time you are fully grinding the footpegs into the tar.

Yamaha Niken neowing
(Image: Yamaha)

Pillion test

With my treasured pillion onboard we headed off to see what she thought of passenger comfort.

Seat comfort was good, grab rails were well positioned, foot rests not too high.

There was plenty of room for her to shift about. Now, as the rider, I noticed that there was no need for me to compensate for being with a pillion, those small counterbalance shifts a rider makes to keep the bike stable two up, the Niken does it for you. Two up at 10kph….easy…..two up over soft ground and wet grass is a doddle. Amazing!

I’m 180cm tall and 90kg and the 820mm seat height suited me fine. I was able to get both feet flat on the ground and spread out for good support.

The panniers are a little unusual in that they’re a cross between a soft and hard case with zipper closure (they came with a pannier liner bag).

They appear to be a bit on the light side, but, hold about 30 litres securely and can be carried around just like any old set of luggage.

The main downside with the panniers is their exposure to being ‘booted’ when getting on or off the bike. They won’t hold a full face, but will take an open-face helmet.

Apart from the obvious expense of purchasing an extra tyre, my main concern was the “busy” left hand switch block. It takes some time to get used to.

The high beam idiot light is a bit too bright at night, as are the cruise control globes. I’d also prefer some adjustment for the windscreen.

ConclusionAlien Yamaha Niken GT

Look beyond the alien appearance and take one for a test ride. It will surprise you as it did me.

Most of my age group couldn’t get past the alien appearance, but a couple of young riders walked up and started taking photos.

Their attention was drawn by the steering mechanism under the front.  They thought the bike was pretty cool!

Thanks to Yamaha Australia and Simon from Chris Watson Cessnock for the test bike. The base model starts at $22,438 (+ORC). Options include panniers ($775), brackets ($523) and centre stand ($781).

Yamaha Niken GTAlien Yamaha Niken GT

  • Price: $24,478 (+ on-road costs)
  • Engine: Liquid-cooled, 4-stroke, DOHC, 4-valve, 847cc 3-cylinder
  • Bore x Stroke: 78 x 59.1mm
  • Compression: 11.5 : 1
  • Fuel: 18 litres
  • Transmission: Constant mesh 6-speed, chain drive
  • Length: 2150mm
  • Width: 885mm
  • Height: 1425mm
  • Seat: 820mm
  • Wheelbase: 1510mm
  • Clearance: 150mm
  • Wet weight: 267kg
  • Suspension: USD Telescopic forks, 110m travel; link rear, 125mm travel
  • Brakes: Hydraulic dual 298mm discs, 282mm rear disc
  • Tyres: 120/70-R15;  190/55-R17

Source: MotorbikeWriter.com

Yamaha Ténéré 700 showcased in Trans Tasman Ténéré Tour

2020 Yamaha Ténéré 700


Yamaha Australia recently staged a series of promotional nights around the country ahead of the pending arrival of the eagerly anticipated new Ténéré 700 adventure motorcycle this December.

Tenere PromoTour Sydney
Yamaha Ténéré 700 showcased in Sydney

Reports in from events held across the country have hailed the tour a success with up to 100 members of the public attending each event. Showcases were staged in Mackay, Brisbane, Newcastle, Sydney, Melbourne, Hobart and Adelaide. There is one event left on the tour calendar for Australia and that happens this Saturday, July 27th, at the Esplanade Hotel in Fremantle. The tour then hits New Zealand next month with visits to Auckland, Wellington and Christchurch, click here to check pending dates.

Tenere PromoTour Melbourne
Yamaha Ténéré 700 showcased in Melbourne

MCNews.com.au recently attended the Melbourne leg of the journey and witnessed the enthusiasm for the new Ténéré 700 for ourselves.  Despite being held at the Park Royal Hotel adjacent to Melbourne airport, with its parking problems and peak hour concerns, dozens of eager fans of the new bike jumped at the chance to get up close and personal with the Ténéré. I bumped in to a couple of fellas who had made the trip down from Wangaratta to attend, a return journey amounting to almost 500 kilometres, how’s that for keen!

Yamaha royalty was in attendance to entertain the eager throng ahead of the machines unveiling with four-time Mister Motocross, amongst many other titles and successes in just about every facet of motorcycling, Stephen Gall, one of the headline acts. 

Tenere PromoTour Brisbane
Stephen Gall with the Yamaha Ténéré 700 in Brisbane

Current Factory Yamaha Dakar Rally rider Rodney Faggotter was interviewed by Gally about the experience of racing Dakar, before Faggotter himself then took us through his bespoke WR450F Rally machine.

Tenere PromoTour Sydney
Andrew Clubb, Rod Faggotter and Stephen Gall with the Yamaha Ténéré 700

Dripping in carbon-fibre and unobtanium it was an object of keen interest. Looking as trick as a MotoGP bike built for the desert, it was a definite highlight for me, it just radiated ‘special’.

Tenere PromoTour Brisbane
Rodney Faggotter’s unobtanium WR450F Factory Rally machine

Some of the other inanimate stars present on the night included some beautifully restored examples of the marque from yesteryear.   

Tenere PromoTour Brisbane Retro Tenere XT
1983 Yamaha Ténéré XT600

Andrew Clubb, known as Captain Tragic for his role in organising the annual Ténéré Tragics rally events, imparted his knowledge of Ténéré history and took us around the room. First stop was a 1983 Ténéré XT600Z. The original (34L) Ténéré sported a massive 30-litre fuel tank and was powered by a kick-start only 595cc single.

Tenere PromoTour Sydney
1988 Yamaha Ténéré 600

We then moved on to a 1988 Ténéré XT600Z which had the Yamaha model designation 3AJ. A much more modern looking machine that really established the Ténéré look. For the sake of us that are not the most skilled in the dark art of kicking big singles into life, it came with electric start. A small screen offered the rider a little more protection while the way ahead was now illuminated by twin head-lights.

Tenere PromoTour Brisbane Retro Tenere
Yamaha XTZ 750 Super Ténéré

Whoa nelly! Then it was on to the big girl! Rally racing speeds had been getting crazier and crazier and Yamaha came to the party with a new twin-cylinder Super Ténéré known as the XTZ 750. This generation of the machine took Yamaha riders to much Dakar success. There was an audible collective gasp around the room when it was noted that a particular XTZ 850 R factory Super Ténéré, ridden by Yamaha Dakar Rally legend Stephane Peterhansel, held an astonishing 105 litres of fuel! The men of the modern Dakar are hard enough now, but I don’t know how those boys racing in those earlier days fitted their balls on the bike!

Tenere PromoTour Sydney
Yamaha XTZ 750 Ténéré

The reminiscing at the older models also took be back to the 1994 XT600E I owned in the mid 90s. It was the twin-carb YDIS model fitted with a big aftermarket Acerbis tank on it that fuelled my explorations around the back-tracks of Western Australia back in the day. I will have to dig some old photographs out of the shed one day and reminisce a little more on some of my own early adventures. 

With the history lesson observed, and appreciated, it was time to turn our attention to the stars of the night that the public had come to see. Yamaha staff whipped the covers off three new Ténéré 700 models, all fitted with various levels of accessories and options.

Yamaha Tenere Trio Accessorised
Yamaha Ténéré 700

Attendees were invited to jump aboard and try the machines on for size themselves and they didn’t need to be asked twice.  People enjoyed the chance to try out the seating position and standing riding stance.

Tenere PromoTour Sydney
Yamaha Ténéré 700 Trans Tasman Tour in Sydney

Those concerned about the 870mm seat height were talked through the optional low seat and suspension lowering kits. After feeling how slim the machine is between the knees, some attendees had their height reservations put to rest after finding it amenable enough for their stature.

Tenere PromoTour Sydney
Yamaha Ténéré 700 Trans Tasman Tour in Sydney

With 240 mm of ground clearance, and 210mm of suspension travel, the seat height is never going to be cruiser like.

Tenere PromoTour Brisbane
Yamaha Ténéré 700 Trans Tasman Tour in Brisbane

Tipping the scales at 187 kilograms dry, or 204 kilogram with all fluids,  including a full 16-litre fuel tank, the new twin-cylinder Ténéré 700 is actually lighter than the outgoing single-cylinder Tenere 660.

Tenere PromoTour Sydney
Yamaha Ténéré 700 Trans Tasman Tour in Sydney

Of course the heart of the machine is the parallel twin engine derived from Yamaha’s very successful MT-07 street-bike. I remember back to riding the first M-07 almost five years ago, at the national launch of the model, my initial words after my first stint on the bike was ‘right, how long do we have to wait for the adventure version?’

Yamaha Tenere 700 World Raid Edition Prototype
Yamaha Tenere 700 World Raid Edition Prototype

It was clear from that first experience of this engine that it would be an absolutely fantastic power-plant for an adventure bike.  I got my answer a year later when Yamaha debuted the first T7 prototype at the EICMA show in Milan. It has been a long three years since then waiting for Yamaha to complete their development process in readying the Ténéré 700 for volume mainstream production. 

Tenere PromoTour Brisbane
Yamaha Ténéré 700 Trans Tasman Tour in Brisbane

We still have a little longer to wait as Yamaha will not officially fire their twin-piston broadside into the middleweight adventure-touring marketplace until this December. It will land priced at $15,499 +ORC.

Clearly then they have not simply shoehorned the original MT-07 engine into a chassis from another model in order to rush to market. Instead they have followed their regular thorough 4-5 year new model development cycle.

Tenere PromoTour Sydney
Yamaha Ténéré 700 Trans Tasman Tour in Sydney

The chassis is all-new and the bike has been rigorously tested across the world and put through endless hardships before Yamaha signed off on the final specification for the machine.

Yamaha also indicated that instead of giving us a powerful animal of an engine, and then having to tame it with electronics, instead they have worked hard on the power delivery of the engine to give the rider a natural feel at the throttle, and a linear enough torque curve so that no traction control system would be necessary.

Tenere PromoTour Sydney
Yamaha Ténéré 700 Trans Tasman Tour in Sydney

The 689cc parallel-twin delivers a claimed 73 horsepower at 6000 rpm and 68 Nm of torque peaks at 6500 rpm. For the rigours of off-road use the cooling system is much larger than what is fitted on the MT-07.

The high-tensile steel diamond frame is also a design specific to the Ténéré and tips the scales at 17.75 kilograms complete with a double-braced head-stock. It is also broken down into various parts so that even in a major crash only parts would need to be replaced, rather than having to write off an entire frame.

Tenere PromoTour Melbourne
Yamaha Ténéré 700 Trans Tasman Tour in Melbourne

Rod Faggotter also helped with development work on the machine and Yamaha took some of his feedback seriously enough to make some late changes to the design. Particularly on the fine settings of the adjustable KYB inverted forks and monoshock.

Australian delivered Ténéré machines will also arrive pre-fitted with an oiled foam filter ready for our adventure conditions. Overseas models will have a paper air-filter with an oiled foam filter available only as an optional extra accessory.

Tenere PromoTour Mackay
Yamaha Ténéré 700 Trans Tasman Tour in Melbourne

It is nice to see how many details have made it across from that first T7 prototype such as the stark quartet of LED lights up fron,t and the screen definitely has those rally styling cues.

Tenere PromoTour Brisbane
Yamaha Ténéré 700 Trans Tasman Tour in Brisbane

From the cockpit the vertically oriented digital dash also helps deepen the rally style experience. A  12-volt outlet is standard and a crossbar sits above the instrumentation to provide a mounting point for accessory navigation options.

Tenere PromoTour Melbourne
Yamaha Ténéré 700 Intrumentation

Yamaha also had a range of other Genuine Accessories on display that included fog light set-ups, adjustable levers, bar risers, and various extra protection items such as a headlight guard. An alloy bash-plate is standard fitment for the Australian market.

Tenere PromoTour Mackay
Yamaha Ténéré 700 Trans Tasman Tour in Mackay

The ‘Competition White’ machine on display at the show was fitted with the optional ‘Mono seat rack’ ($308), ‘Low Seat’ ($280) and ‘Lowering Kit’ ($163).

Yamaha Tenere Acessories
Yamaha Ténéré 700

The ‘Tech Black’ Ténéré 700 was in full-fruit touring guise. The alloy side cases will set you back almost $2000 when keyed alike and the mounting system is added to the bill. A more comfortable passenger seat is a $344 ask while the centre-stand commands a $455 premium. The more comprehensive engine protection bars cost $424 while the accessory fog lights and requisite bracketry will set you back around $940.

Yamaha Tenere Acessories
Yamaha Ténéré 700

By far the trickest looking machine was the ‘Ceramic Ice’ coloured variant which was set-up more akin to how I would like my Ténéré 700 fitted out if taking one home. 

Yamaha Tenere Acessories
Yamaha Ténéré 700

Aural pleasure is a big part of the overall riding experience for me and somehow I would have to find the $1149 for the optional Akrapovic muffler, which also improves the look of the machine. A rally seat ($596) also features on this machine along with a radiator guard ($197), chain guard ($130) and headlight guard ($173). The 908RR Dunlops complete the ready to rock the dirt look.

Tenere PromoTour Melbourne
Yamaha Ténéré 700 Trans Tasman Tour in Melbourne

A range of ‘Yamaha Technical Wear’ will be launched later this year which will feature gender specific adventure apparel including adventure jackets, pants and gloves.

Yamaha Technical Wear Adventure
Yamaha Technical Wear

All in all the Trans Tasman Ténéré 700 Tour seems to have been an overwhelming success for Yamaha.

Source: MCNews.com.au

JvB-moto turn their customising skills to an XSR900 CP3

German customising house JvB-moto recently turned their craft to Yamaha’s XSR 900 and came up with this special to showcase their aftermarket kit offerings that transform Yamaha’s triple-cylinder naked in to something a little more out of the ordinary.

JvB moto XSR
JvB-moto XSR900

This bike offers a tough stance and Jens vom Brauck explains his approach.

JvB moto XSR Static
JvB-moto XSR900

“The biggest retro influence is on the lines and proportions. I am a big fan of 70s and 80s concept cars and got a lot of inspiration for this build there. The bike has an understated, clean look and has more of a concept bike ‘feel’ than a typical custom bike.”

JvB moto XSR
JvB-moto XSR900

The bike was first presented at the 2019 Café Racer Festival where it received the Best of Show prize.

JvB moto XSR
JvB-moto XSR900

The CP3 captures perfectly the JvB-moto design philosophy of clean lines that enhance the stock bike as a base for easy customisation and breathe new life into it.

JvB moto XSR Action
JvB-moto XSR900

While the retro theme is in part an influence on the CP3, the design is inherently minimalist.

JvB moto XSR Static
JvB-moto XSR900

The dark blue Yamaha racing colour used was darkened further and made matt, highlighting the new bodywork whilst retaining the stock bike’s character.

JvB moto XSR
JvB-moto XSR900

Carbon-fibre wheel covers and Behringer front brake discs packing extra stopping power. Lightech footrests help reduce weight and give an assuring platform for the rider, with a new seat to accommodate the feel of the CP3.

JvB moto XSR
JvB-moto XSR900

Ultimately JvB-moto envisaged the CP3 as a reflection of the XSR900’s exciting 850cc 3-cyclinder engine, unchanged in the customisation, and designed the bike to look how the engine feels to ride. The Termignoni exhaust amplifies the emotive sound of the triple and provides a small boost in horsepower, completing the CP3 package that raises the very high standard of Yard Built specials even further.

Jens elaborated on this approach: “I wanted it to look fast without looking aggressive, for it to be less retro and more minimalist, with a reduced and purposeful design.”

JvB moto XSR Action
JvB-moto XSR900

Yamaha’s Sport Heritage range is made of state of the art technology machines with retro looks – the range is an easy access to real personalization and through collaborations with professionals like JvB-moto, the brand aims to bring this creativity even closer to the customer.

JvB moto XSR Static
JvB-moto XSR900

JvB-moto is now developing a kit to enable customers to either reproduce their own CP3 or just adapt parts of it, emphasizing that the bike is a perfect fit for the vision of the intrepid customiser looking to easily make their own set of customisations to the Yamaha XSR900.

JvB moto XSR Static
JvB-moto XSR900

The kit includes:

– Wheel covers
– Brakes
– Footrests
– Seat
– Exhaust
– Front fender
– Fuel tank covers
– Handmade tail section with LED taillight
– Speedometer relocation kit
– Tapered handlebar and raiser
– LED headlight and cover
– Front and back LED indicators
– Number plate carrier

JvB moto XSR Static
JvB-moto XSR900

There is also a range of parts yet to be developed. JvB-moto expect this bolt-on kit to be available to customers in early 2020, and will give them nearly unlimited options to tailor their own XSR900.

JvB moto XSR Static
JvB-moto XSR900

Source: MCNews.com.au

2020 Yamaha YZF-R1 and 2020 YZF-R1M

2020 Yamaha YZF-R1 and YZF-R1M

Yamaha have released details overnight on the 2020 evolution of their flagship R World models, the new 2020 YZF-R1M and YZF-R1.

Yamaha YZF R
2020 Yamaha YZF-R1

2020 Yamaha YZF-R1 New Features

  • Redesigned cylinder head, fuel injectors, finger-follower rocker arms, and camshaft profiles
  • APSG ride-by-wire system with YCC-T
  • Brake Control (BC) and Engine Brake Management (EBM) for a total of seven electronic control rider aids
  • Öhlins ERS NPX front fork with integrated gas cylinder and optimised rear shock settings (R1M)
  • KYB upside-down front fork with new internal shim stack design (R1)
  • Optimised settings for linked-type Monocross KYB rear shock (R1)
  • Next-generation R-Series redesigned bodywork with outstanding aerodynamic efficiency
  • Carbon fibre tail cowl (R1M)
  • Bridgestone RS11 Battlax Racing Street tyres
  • New front brake pad friction material for excellent control while braking
Yamaha YZF RM
2020 Yamaha YZF-R1

Refined CP4 Engine

The new 2020 R1M and R1 come equipped with the next generation of Yamaha’s unique 998cc inline four-cylinder crossplane crankshaft engine for refined performance. Returning features such as titanium fracture-split connecting rods and offset cylinders contribute to a responsive and potent character, while the cylinder head, fuel injectors, finger-follower rocker arms, and camshaft profiles are new for 2020.

Yamaha YZF RM
2020 Yamaha YZF-R1 and YZF-R1M

An all-new Accelerator Position Sensor with Grip (APSG) ride-by-wire system featuring Yamaha’s Chip Controlled Throttle (YCC-T) eliminates throttle cables and reduces weight while providing smoother throttle operation.

Yamaha YZF RM
2020 Yamaha YZF-R1
Augmented Electronics Package for More Rider Control

The most technologically advanced electronics package in Yamaha’s supersport line-up complements the evolutionary engine of the new 2020 R1M and R1. Yamaha’s proprietary six-axis Inertial Measurement Unit (IMU) continues to be the key feature of the package, and processes real-time vehicle attitude and wheel speed data for new Brake Control (BC) technology that gives riders the option to choose between two intervention modes for enhanced braking control. Riders can select a “BC1” setting for enhanced upright, straight-line braking, or a “BC2” setting for enhanced braking into corners, where intervention timing grows faster the deeper the lean angle becomes.

Yamaha YZF R
2020 Yamaha YZF-R1

A new Engine Brake Management (EBM) system also allows the rider to select between three levels of engine braking force to suit their individual preference or riding situation on the road or track. Both the BC and EBM settings are adjustable through onboard Yamaha Ride Control (YRC) and Yamaha’s Y-TRAC smartphone (Android only) and tablet app (Android and iOS).

Yamaha YZF RM
2020 Yamaha YZF-R1M
Enhanced Suspension Performance

Premium Öhlins Electronic Racing Suspension (ERS) has been a staple of the R1M’s chassis performance, and a new NPX pressurised front fork with a gas cylinder built into the front fork axle bracket, along with revised rear shock settings to complement the performance of the front fork, are features of the new 2020 model. With rider adjustability options through YRC settings and Y-TRAC, the new Öhlins ERS suspension package takes the R1M to the next level of performance.

Yamaha YZF RM
2020 Yamaha YZF-R1M

The 2020 YZF-R1 also receives suspension performance enhancements courtesy of a new KYB front fork with a new internal shim stack design, and a KYB rear shock with revised internal settings. Together, the changes result in smoother suspension dampening paired with an improved feeling of contact and grip with the street or track surface.

Yamaha YZF RM
2020 Yamaha YZF-R1M
Advanced Bodywork with Next Generation R-Series Design

Redesigned bodywork contributes to higher-quality performance and a more comfortable rider fit. The new design creates a 5.3% increase in aerodynamic efficiency while reducing wind noise and pressure on the rider when in a tucked position, and improved comfort comes from smoother side sections where the rider’s legs contact the bike. The 2020 R1M also receives a new carbon fibre tail cowl to accompany the existing carbon fibre passenger seat cowl.

Yamaha YZF RM
2020 Yamaha YZF-R1M

New lightweight, compact LED twin headlights optimise illumination for both the low and high beam, and combine with the redesigned body styling to create a new front face symbolising the next-generation of R-Series design.

Yamaha YZF RM
2020 Yamaha YZF-R1M

The new 2020 YZF-R1M will be available in limited quantities in a Carbon Fibre colour scheme, while the new 2020 YZF-R1 will be available in Team Yamaha Blue and Raven colour. Pricing and available is TBC.

Yamaha YZF R
2020 Yamaha YZF-R1

2020 YZF-R1/M Specifications

  • Engine type Liquid-cooled inline 4-cylinder DOHC; 16 valves
  • Displacement 998cc
  • Bore x stroke 79.0mm x 50.9mm
  • Compression ratio 13.0 : 1
  • Fuel delivery Fuel injection with YCC-T and YCC-I
  • Starter system Electric
  • Transmission system 6-speed; wet multiplate assist and slipper clutch
  • Final Transmission Chain
  • Frame Aluminium Deltabox
  • Front suspension YZF-R1 43mm KYB inverted fork, fully adjustable; 120mm travel
  • Front suspension YZF-R1M 43mm Öhlins® Electronic Racing Suspension NPX fork, fully adjustable; 120mm travel
  • Rear suspension YZF-R1 KYB single shock, fully adjustable; 120mm travel
  • Rear suspension YZF-R1M Öhlins Electronic Racing Suspension single shock, fully adjustable; 120mm travel
  • Front brake Dual 320mm hydraulic disc; Brake Control System and ABS
  • Rear brake 220mm hydraulic disc; Brake Control System and ABS
  • Front tyre 120/70-R17
  • Rear tyre R1- 190/55ZR17  R1M – 200/55ZR17
  • Overall length 2055 mm
  • Overall width 690 mm
  • Overall height 1165 mm
  • Seat height 860 mm
  • Wheel base 1405 mm
  • Wet weight (including full oil and fuel tank) R1 – 201kg / R1M – 202kg
  • Fuel tank capacity 17.0L
  • Colours R1 – Team Yamaha Blue, Raven R1M – Carbon Fibre
Yamaha YZF R
2020 Yamaha YZF-R1

Source: MCNews.com.au

Yamaha recalls learners over breaking brakes

The official recall notice, issued through the Australian Competition and Consumer Commission says that when “strong gripping force is applied to the front brake lever, it may break”.

“If the front brake lever breaks while the motorcycle is being ridden, the rider will lose all brake functionality at the front of the motorcycle, increasing the risk of an accident and serious injury to the rider and other road users,” the notice says.

Owners of affected motorcycles should contact their local Yamaha Dealer to arrange an inspection and have the brake lever replaced, where required.

The vehicle identification of all 124 affected bikes are listed at the end of this article.

Photograph of Yamaha YZF-R3A breaking
Yamaha YZF-R3A

Even though manufacturers and importers usually contact owners when a recall is issued, the bike may have been sold privately to a rider unknown to the company.

Therefore, Motorbike Writer publishes all motorcycle and scooter recalls as a service to all riders.

If you believe there is an endemic problem with your bike that should be recalled, contact the ACCC on 1300 302 502.

To check whether your motorcycle has been recalled, click on these sites:

• Australia

• USA

• New Zealand

• Canada

VINs of affected bikes

MH3RH12H5KK001081
MH3RH12H9KK001083
MH3RH12H0KK001084
MH3RH12H2KK001085
MH3RH12H4KK001086
MH3RH12H6KK001087
MH3RH12H8KK001088
MH3RH12HXKK001089
MH3RH12H6KK001090
MH3RH12H8KK001091
MH3RH12HXKK001092
MH3RH12H1KK001093
MH3RH12H3KK001094
MH3RH12H5KK001095
MH3RH12H7KK001096
MH3RH12H9KK001097
MH3RH12H0KK001098
MH3RH12H2KK001099
MH3RH12H5KK001100
MH3RH12H7KK001101
MH3RH12H9KK001102
MH3RH12H0KK001103
MH3RH12H2KK001104
MH3RH12H4KK001105
MH3RH12H6KK001106
MH3RH12H8KK001107
MH3RH12HXKK001108
MH3RH12H1KK001109
MH3RH12H8KK001110
MH3RH12H1KK001112
MH3RH12H3KK001113
MH3RH12H5KK001114
MH3RH12H7KK001115
MH3RH12H9KK001116
MH3RH12H0KK001117
MH3RH12H2KK001118
MH3RH12H4KK001119
MH3RH12H0KK001120
MH3RH12H2KK001121
MH3RH12H4KK001122
MH3RH12H8KK001124
MH3RH12HXKK001125
MH3RH12H1KK001126
MH3RH12H3KK001127
MH3RH12H5KK001128
MH3RH12H7KK001129
MH3RH12H3KK001130
MH3RH12H7KK001132
MH3RH12H9KK001133
MH3RH12H0KK001134
MH3RH12H2KK001135
MH3RH12H4KK001136
MH3RH12H6KK001137
MH3RH12H8KK001138
MH3RH12HXKK001139
MH3RH12H8KK001141
MH3RH12HXKK001142
MH3RH12H1KK001143
MH3RH12H3KK001144
MH3RH12H5KK001145
MH3RH12H2KK001149
MH3RH12H9KK001150
MH3RH12H0KK001151
MH3RH12H6KK001154
MH3RH12H8KK001155
MH3RH12H1KK001157
MH3RH12H5KK001159
MH3RH12H3KK001161
MH3RH12H2KK001166
MH3RH12H6KK001171
MH3RH12H8KK001172
MH3RH12H1KK001174
MH3RH12H5KK001176
MH3RH12H9KK001178
MH3RH12H0KK001179
MH3RH12H9KK001181
MH3RH12HXKK001187
MH3RH12HXKK001190
MH3RH12H1KK001191
MH3RH12H3KK001192
MH3RH12H7KK001194
MH3RH12H9KK001195
MH3RH12H2KK001197
MH3RH12H9KK001200
MH3RH127XKK002041
MH3RH1271KK002042
MH3RH1273KK002043
MH3RH1275KK002044
MH3RH1277KK002045
MH3RH1279KK002046
MH3RH1270KK002047
MH3RH1272KK002048
MH3RH1274KK002049
MH3RH1270KK002050
MH3RH1272KK002051
MH3RH1274KK002052
MH3RH1276KK002053
MH3RH1278KK002054
MH3RH127XKK002055
MH3RH1271KK002056
MH3RH1273KK002057
MH3RH1275KK002058
MH3RH1277KK002059
MH3RH1273KK002060
MH3RH1275KK002061
MH3RH1277KK002062
MH3RH1279KK002063
MH3RH1270KK002064
MH3RH1272KK002065
MH3RH1274KK002066
MH3RH1276KK002067
MH3RH1278KK002068
MH3RH127XKK002069
MH3RH1276KK002070
MH3RH1278KK002071
MH3RH127XKK002072
MH3RH1271KK002073
MH3RH1273KK002074
MH3RH1275KK002075
MH3RH1277KK002076
MH3RH1279KK002077
MH3RH1270KK002078
MH3RH1272KK002079
MH3RH1279KK002080

Source: MotorbikeWriter.com

All-New Yamaha Ténéré 700 Tours Australia & NZ

Yamaha’s Tenere 700 Lands in Oz

Pre-production models to do the rounds ahead of official launch


Yamaha Motor Australia have announced three of the new Tenere 700 motorcycles have arrived in Australia and will embark on a travelling roadshow in July before the model goes on sale towards the end of 2019.

The all-new twin cylinder adventure bike will appear in venues across Australia and New Zealand so that riders can get up close and personal with the new lightweight ADV model.

For the full details on this new model see:
Yamaha Ténéré 700 lands in December at $15,499 +ORC (link)

Yamaha Tenere MBL STA
Yamaha Tenere 700

The three units will be presented in three different guises – one accessorised with an Australian off-road theme, one in full touring mode with hard luggage and low seat option; while the third unit will be standard. All three colour options will be represented.

Yamaha Tenere MBL STA
Yamaha Tenere 700

The travelling road show will be headlined by Yamaha legend, keen Tenere rider and four times Mister Motocross, Stephen Gall. Special guests include Yamaha’s Australian Dakar Rally – and prototype Tenere – rider Rodney Faggotter. Tenere Tragic organiser Andrew Clubb and Ride ADV head honcho Greg Yager will also be on hand to discuss all things Tenere.

Sean Goldhawk – Yamaha Motor Australia Marketing Manager

“This will be a great opportunity for customers to get up close and personal with the new Tenere 700 and learn more about it. Each event will feature a full media type presentation with contributions and insights from our special guests. Customer will also be able to register their interest in the new model and the related accessories as well as some exciting new adventure rides that we are planning for new Ténéré 700 owners.”

Yamaha's Sean Goldhawk presented new Yamaha product at Moto Expo
Yamaha’s Sean Goldhawk

To register your interest to attend visit the YMA website and get your name down quick! See: https://yma.bike/tenere700tour. Yamaha Motor Australia will contact you to confirm your registration.

Note that due to the pre-production status of these units, they are not able to be test ridden. See below for the list of dates.


  • Queensland
    • Mackay – Monday 8th July
      • Mackay Marina, Mulherin Drive Mackay Harbour QLD 4740
    • Brisbane – Wednesday 10 July
      • Novotel Brisbane Airport, 6-8 The Circuit Brisbane Airport QLD 4008
  • NSW
    • Newcastle – Friday 12 July
      • Noahs on the Beach, 29 Zaara Street Newcastle NSW 2300
    • Sydney – Monday 15 July
      • Atura Blacktown, 32 Cricketers Arms Road Prospect NSW 2148
  • Victoria
    • Melbourne – Wednesday 17 July
      • Parkroyal Melbourne Airport, Arrival Drive Melb Airport Tullamarine VIC 3045
  • Tasmania
    • Hobart – Saturday 20 July
      • Hotel Grand Chancellor Hobart, 1 Davey Street Hobart TAS 7001
  • South Australia
    • Adelaide – Tuesday 23 July
      • Stamford Grand Adelaide, 2 Jetty Road Glenelg SA 5045
  • Western Australia
    • Perth – Saturday 27 July
      • Esplanade Hotel Perth, Corner Marine Terrace & Essex St Fremantle WA 6160
  • New Zealand
    • Auckland – Friday 16 August
    • Wellington – Sunday 18 August
    • Christchurch – Wednesday 21 August

Source: MCNews.com.au