Tag Archives: Motorbike advice

Motorcycle mods don’t have to be illegal

A new motorcycle is a blank canvas that you can personalise and modify without making it illegal to ride, says RACQ technical and safety officer Steve Spalding.

He recently bought a 2010 Triumph Bonneville SE (above) that he has been gradually “reworking” to his own tastes.

“Motorcycles aren’t a one-size-fits-all product,” he says.

“Modifications can be made for a wide range of reasons from re-padding the seat to full customisation that ends up nothing like the bike it started as.

“However, modifications need to be thought out carefully because it’s easy to spend a lot of time, and even more money, making changes that don’t deliver what the rider hoped for.

“If done well, a modification should result in a noticeable improvement without causing unintended drawbacks.

“Done badly, a modification will fail to deliver a benefit, disappoint the rider and quite likely be a detriment to some other aspect of the bike such as performance, handling, comfort or compliance.”

Avoid illegal mods

To avoid turning your bike into an illegal vehicle, click here to read about the major rules that apply to motorcycles modifications.

Rules regarding motorcycles, mopeds, scooters and trikes vary depending on the Australian Design Rule (ADR) category and the date of manufacture.

If you are unsure about the standards and ADRs applying to your bike, you should consider seeking professional help from the transport department or automobile association in your state.

“We have a couple of advisors who are particularly knowledgeable on motorcycle technical matters – plus can give useful advice about buying wisely,” Steve says.

Contact RACQ Advice on 07 3666 9748.

Best advice

Steve Spalding DIY bike maintenance Easter safety message duty easter pulp ulp premium illegal
Steve Spalding

“The key to achieving a successful modification is getting good advice from the start,” Steve says.

“More importantly, don’t act on well-meaning but often inaccurate information or opinions.

“Online forums are one such source where riders need to be careful about the accuracy of what’s being put forward as information.

“There’s no doubt that a collection of owners will build a good bank of knowledge over time about modifications and be keen to share with other owners.

“However, it’s also the case that advice offered might not be correct or relevant to what the forum visitor is trying to work out.

“The best advice is the right advice, and it requires careful judgement to separate these two out.”

Mechanical mods

Gazi motorcycle suspension illegalWhile some ownership problems are relatively generic and a common solution might work, others less so. Replacing shocks is one such example, says Steve.

“Everyone has a different idea of what is the right balance between comfort and handling and each shock on the market will meet those individual requirements differently,” he says.

“So good advice might be to scan what others are saying, but a conversation with the supplier is also invaluable.

“And, an important question is will the non-OEM shocks actually make the bike better and the rider happier? If they won’t, then it’s possibly money wasted.”

Compliance issues

Modifications affecting compliance is another problem area, Steve says.

“Compliance differs depending on the market the bike was sold in, so an online forum could be generating discussion about what’s allowed, or not allowed, in another region,” he warns.

“Again, the reader needs to probe a bit more before hitting the online ordering button or tampering with their bike.”

Exhaust modsAftermarket exhaust peeves enemy resale illegal

One of the most common modifications on a bike is the exhaust muffler.

Steve says it is rare to see a standard pipe.

“Increased noise, or claims of more power, are the usual reasons given for swapping the muffler,” he says.

“Exhaust noise is subjective; some like more noise and others don’t.

“But how does a rider know if there is actually a power increase? And even if the supplier offers power charts to show the difference, is it noticeable on the road?

“One thing that will quite likely be affected though is compliance.

“Different states and transport authorities apply different noise standards and to stay legal requires the rider to do some additional checking.

It doesn’t mean a legal pipe can’t be found; it just requires extra research.”

Modifying emission controls presents a similar issue that could make your bike illegal.

“Emissions standards are also region-specific so to stay legal be cautious of relying on online forums.

“A non-compliant bike might not bother some but it can be a pain when the owner comes to selling it or it’s due for a roadworthy check.”

Source: MotorbikeWriter.com

Exhaust pipe cleaner secret formula revealed

An American inventor who has been working on a “miracle” exhaust pipe cleaner for several years has revealed his secret formula on YouTube after it was “stolen” and marketed by a rival.

Neil Stern contacted Motorbike Writer in 2015 after we published an article in which the World Patent Marketing issued a patent for his “Rid a Blue”, a quick-cleaning product designed to take the bluing out of stainless steel or chrome exhaust pipes.

It was claimed to comprise detergent oil, white diamond Polish and an “anti-oxidiser chemical”.

Neil told us he was the inventor of Rid a Blue and was working on getting it to market.

He asked if we would like to try it and we accepted.

Dodgy packExhaust pipe cleaner secret formula revealed Neil Stern

When it arrived in some dodgy looking bottles with hand-written directions and an old rag, we were immediately dubious.

It didn’t work on an old bike we had and Neil said it was probably not real chrome or stainless steel.

So he sent another dodgy package and suggested we try it on the badly oxidised pipes of our Triumph Street Scrambler.

This time the results were amazing and immediate.

With only a small application of the solution and without much rubbing it immediately removed the ugly oxidation spots.

In fact, he emphasises you have to be quick and not leave it on for long as it is “strong and fast acting”.

He said it consisted of an “activator” to shift the stain and a deactivator to stop the process. You then use a normal chrome polish such as purple to finish the job.

Neil ran in to all sorts of dramas in getting his product to market, so he gave up.

However, when he found someone selling his formula this year at the Sturgis Motorcycle Rally, he decided to reveal the secret formula in this crude video on YouTube.

Secret ingredients

It turns out the secret ingredients in the formula are one-third muriatic acid to two-thirds plain old polish.

Now, muriatic acid (HCL) is a form of hydrochloric acid which is poisonous and highly corrosive. It is also known as spirits of salt.

I can imagine most riders immediately recoiling at the prospect of putting corrosive salt-based acid anywhere near their pride and joy.

In fact, I never would have agreed to use it had he revealed his secret ingredients.

However, it does work.

Warning

Exhaust pipe cleaner secret formula revealed Neil Stern
Only a small amount is needed

Neil advises “be careful, it’s strong” and to only use a small amount.

It also has a strong odour and we recommend that if you are brave enough to try it on your pipes, make sure you do it in an open space.

We would also suggest you wear gloves even though we weren’t advised to and didn’t.

Also, be very careful not to get any on any other surfaces, especially paint!

We have not seen any adverse reaction in the pipes which have not oxidised again.

Exhaust pipe cleaner secret formula revealed Neil Stern
Still non-oxidised

“Never let the activator stay on long and hit it with a polish to deactivate and polish,” he says.

“Never do it on hot pipes, always cold.”

He says it can be used to clean all oxidation on stainless steel and chrome.

Neil says some chrome pipes are “plated under solution with no oxygen which is unstable”.

“When in the air and heated up, the molecules in the chrome fall apart and allow oxidation and bluing,” he says.

“What this cleaner does is force the particles together,” he said.

Neil no longer plans to market his cleaner and has now turned his attention to health care products.

Source: MotorbikeWriter.com

5 Best Security Gadgets for Your Motorbike

(Sponsored post on bike security for our North American readers)

Motorbikes are excellent travel options for those who cherish adventurous trips on and off the road. Moreover, it is one of the most cost-effective and eco-friendly ways to beat heavy traffic in highly populated cities. Therefore, your motorbike is an investment that you need to protect against criminals who target to take this asset away from you.

In the recent past, bike theft has been on the rise with thousands of bikes stolen in the US every year. Even though there are ways to track vehicle history to prevent buyers from buying stolen motorbikes, most of the stolen bikes are never recovered. Thieves will quickly piece out the bike and sell the parts or reassemble it on a different frame. In this article, we have compiled 5 best security gadgets to help you secure your motorbike.

Aldi motorcycle cover Aldi annual sale securityMotorcycle Cover

Thieves do not steal any motorbike; they usually spy around to identify particular models to go for. Keeping a cover on your bike hides most of the important details that the criminals could be looking for, thus making it a less attractive target. Besides, there is a time-consuming hindrance for the thief. Though the cover is a basic accessory to keep your scrambler in good condition, it also provides security benefits.

Motorcycle Anti-Theft Lock and Alarm

A bike lock is one of the most effective preventive gadgets, making the job of a thief more risky and harder. However, with the right tools and techniques can break any lock or even carried in a track but using a strong lock along with other security device or mechanism is a great way to secure your bike. Some of the recommended anti-theft lock devices include:

Fork (Steering) Lock – This makes it impossible to steer the motorbike, so the thief cannot wheel it away.

Disc Lock – A small type of motorcycle lock fitted on the brake rotor to prevent the wheel from turning.

Digital Smart Locks – It can either be the steering or the disc lock that integrates it with the alarm system. Whenever a thief tries to break the lock, it activates the alarm scaring away the thief. Some smart locks in the market like Lock8 have a Bluetooth feature, which detects when you are away from the bike and automatically activates the alarm. Additionally, the device has a motion-sensing feature that activates the alarm when it detects motion. Some even have mobile apps that will alert you when the alarm starts.

Lock theft thief stolen steal clever steal security

Kill/Stop Switch

A motorcycle kill switch disables the connection to the ignition circuit stopping the bike from starting even if the thief has keys. Not even hot-wiring will start the machine. However, some criminals know how to flip the kill switch and can easily wheel away with the bike. Hiding the kill switch is an extra step to help you prevent theft of your motorbike.

Motorcycle Chain/ Cable

Some intelligent thieves have the techniques and powerful tools to break the steering or disc lock to escape with your machine. Combining the lock with a chain or cable enhances the security of the bike, making it harder to steal. The best way to use the chain/cable lock is on the back wheel as the front can be easily removed. Additionally, it is advisable to anchor the chain on an immovable object such as a street lamppost. You may also chain through the back wheel and the bike frame.

Motorbike GPS Tracking Device

Though the above gadgets can prevent bike theft, it is never a 100% guarantee. A GPS tracking device does little to nothing in preventing your ride from being stolen. However, it is a clever investment to help you recover your scrambler in the event it is stolen. Mostly the GPS tracker is attached in a hidden part on the bike. The device transmits the live location and other details about the bike such as movement and speed to a service which you can track online from a web-based or mobile app.

Summary

Losing a valuable possession like a motorbike can be a painful experience for anyone. While the unexpected may happen to you at any time, investing in advanced bike anti-theft gadgets can save you from this pain. Other bike safety measures include removing the keys from the ignition even when you are a few metres away from the bike, locking it in your home garage and parking within your sight whenever possible.

Source: MotorbikeWriter.com

Are cruisers the best bike for mature riders?

As some mature riders begin to suffer from various aches and pains they tend to opt for cruisers to relieve the stresses on their body. 

But are cruisers with their relaxed riding position really the most comfortable bike to ride?

It really depends on what ails you.

Common ailments for mature riders are bad backs, crook knees, dodgy hips and arthritic hands.

As someone who has all these problems to varying degrees and tested all types of motorcycles over the years, I feel I am qualified to comment.

So let’s look at these separately and together.

Bad backKobbers Kruiser Klub now fr all cruisers except Harleys mature

If you have a bad back, a cruiser may not be the right bike for you.

In the relaxed riding position of a cruiser with feet-forward controls, you sit as though you are in a couch. Usually your spine is straight up and down or slightly curved.

That means any bumps from the suspension will be relayed straight up your ageing backbone.

Your legs cannot prevent any of that jolting to your back because they are out in front of you.

Depending on the handlebars, your arms also cannot take any of the stresses and strains away from your back.

All your weight is pressed in to the seat with no way to relieve that stress, so you can get a sore lower back and backside. An aftermarket backrest or luggage on the back seat may help.Kobbers Kruiser Klub now fr all cruisers except HarleysKobbers Kruiser Klub now fr all cruisers except Harleys mature

You may find a bike where your feet are in a mid-mount position is better because your body is in the shape of a coiled spring and absorbs the bumps more evenly.

You can also take some of the weight on your feet and legs.

A softer seat or a supplementary cushion such as an Airhawk may help.

Some people even find a sports bike is good because they can take some weight on their hands.

Crook kneesDaytona 675 Adventure cruisers naked sports touring Safety mature

If you are in need of a knee operation or replacement, you will find that anything with a tight knee bend in the riding position is uncomfortable.

That rules out sportsbikes.

However, bikes with a neutral riding position such as most naked bikes should be ok as you can occasionally straighten your leg to relieve the pain.2019 Kawasaki Versys 1000 SE mature

That is more difficult when your feet are tucked up behind you.

The best bike in this situation is a cruiser where your legs are straighter.

Some people install highway bars to rest their feet, but this can be considered dangerous as your feet are away from the important gear and brake controls.

Dodgy hips2016 Harley-Davidson Heritage Softail Classic FLSCc mature

You would think that a cruiser with its relaxed position would be best for mature people suffering from hip problems.

However, most low-riding cruisers have wide fuel tanks which means you sit with your hips splayed around the tank.

This affects the hip flexor muscles and can cause a pinching sensation.

You are best to find a bike with a narrow tank so you can get your legs closer together.

Arthritic handsFingers wrapped around the throttle frail

Arthritis in the hands can be very painful on long trips without cruise control. You can also buy a palm rest so you don’t have to curl your fingers around the throttle.

Being able to relieve the pressure on your hands also means finding a bike where the bars are not too low or far away.

You will probably also need a fairly thick bar grip so your hands aren’t curled too much.

You can buy wider and softer grips such as Grip Puppies to alleviate some of the pain from the jackhammer effect of the front forks over rough surfaces.

Mature conclusion

If you are becoming a mature rider with one or more of these problems, you are going to have to think hard about what you need to remain comfortable on a longer ride.

That’s why it’s important to go for as long test ride, not just around the block. That’s if the dealer offers you a test ride at all!

A short sit on a motorcycle in a showroom (if they let you!) also won’t provide any answers. You would have to sit there for a couple of hours and the bike would need to be vertical, not on its side stand.

We suggest trying a few bikes, maybe try your friends’ bikes, and don’t just opt for a cruiser because it looks comfortable!

Source: MotorbikeWriter.com

How to squeeze out more fuel economy

Most motorcyclists are not too concerned about fuel economy, but there may be times when you need to ride more economically just to make it to the next service station.

A few years ago, we miscalculated fuel economy on a Harley-Davidson ride to the Iron Run rally in Queenstown, New Zealand.

The low-fuel lights flashed on the bike Heavy Duty editor Neale Brumby was riding as well as mine while we were in the remote forest section on the west coast of the South Island.

We had no idea how far it was to the next service station, so we went into fuel conservation mode.

It was actually fun, if dangerous, as we switched off the bikes for downhill runs, kept corner speeds high and took turns at closely draughting each other.

In fact, we strongly advise you to never switch off your engine while moving!

Some bikes have servo-assisted brakes that require power to operate. It could also cause a rear-wheel lock-up when you switch back on and re-engage the drive.

You will also lose the use of crucial safety features such as brake lights and indicators.

Fuel economy tipsTriumph Bonneville fuel economy rules service station fuel economy

There are much safer ways of conserving fuel if you are ever in the same situation, something more likely in remote areas of Australia’s outback.

Momentum and aerodynamics are the most effective ways of reducing fuel consumption.

Acceleration chews fuel, so you need to keep the momentum going and avoid heavy braking.

That means smooth and light acceleration before you reach the bottom of a hill so that you don’t loose too much speed and need to accelerate hard to get up the next hill.

Keep that momentum going and your speed fairly stable.

Aero hurdle

One of the biggest hurdles to motorcycle fuel economy is the aerodynamics of the machine and rider.

Even aero-dynamically designed motorcycles like the Suzuki Hayabusa are not very aerodynamic when a rider sits on them.

So it is important that the rider crouches down over the tank to decrease their wind resistance.

Check the official fuel economy figures for your motorcycle. Some companies actually list them for various speeds. That’s because they can vary substantially with speed.

Most motorcycles will have optimum fuel consumption figures around 80km/h, thanks to the aerodynamics of a motorcycle, so stay around that speed.

Otherwise, if you are riding in remote areas of Australia, it is a good idea to carry a 5-litre jerry can of fuel.

Even if you know there is a service station 300km down the road, it may not be open, it may be out of fuel, or, as I once found, the electricity is out and they can’t pump the fuel!

Source: MotorbikeWriter.com

Does premium fuel give bikes a boost?

Using a premium fuel with a higher octane than specified by the motorcycle manufacturer will not improve engine power or economy, RACQ technical officer Steve Spalding advises.

He says the energy content of fuel is the same no matter what octane rating it has.

“We see a lot of claims made about using premium fuels over standard and often motorists/riders believe they get a benefit from their use,” he says.

“The reality is by using a fuel with a higher octane than specified, there is only an economic or performance benefit if the engine management system can utilise the higher octane. Some will and others won’t.”

The anecdotal evidence of riders saying they get more power and higher range from a higher octane than their bike needs may simply be justifying to themselves the extra expense of PULP, Steve suggests.

Steve Spalding DIY bike maintenance Easter safety message duty easter pulp ulp premium
Steve Spalding

Premium advantages

However, there are other advantages to using a PULP fuel over ULP.

“Some premium fuels such as Caltex and BP advertise they have additional cleaning additive packages that can offset the need to periodically buy fuel cleaners,” Steve says.

However, riders would have to work out if it is cheaper to pay the extra price for PULP over ULP rather than buying the occasional cleaner additive.

It may have been an economically wise decision about a decade ago, but the price differential between ULP and PUP has crept up and is now about 12-14c a litre.

“Fuel makers have worked out that people will buy it, not often on an evidence-based reason,” Steve says.

Steve says fuel companies and retailers make the most profit from the sale price of PULP.Fuel petrol servo service station helmet pulp ulp premium

Steve also points out that while ULP also has cleaning additives, it just doesn’t have the additional cleaners in some of the higher octane fuels.

However, it is certainly more convenient to have the cleaner additives in the fuel than having to periodically buy and add the fluid separately.

Steve also says PULP has lower levels of sulphur.

“While these are beneficial in reducing the build-up of engine internal deposits, they won’t make the bike travel further for each litre of fuel purchased,” he says.

“The best advice is to use the fuel specified for the bike.”

Low octane risksDirty fuel premium

Most modern motorcycles recommend a minimum of 95 or 98 RON.

If you fill up with a lower octane rating you run the risk of harmful engine detonation and pinging, Steve warns.

Also the higher sulphur content in RULP can damage catalytic converters and prevent them from working properly.

Some motorcycles have knock sensors that sense detonation or pinging and alter the ignition timing to effetely down-tune the engine.

Knock sensors are a preservation measure in case you are stuck at a remote service station that doesn’t have premium fuel.

Lastly, with E10 being common in services stations, ensure your bike is compatible with it before using, older carburettor models shouldn’t use an ethanol-based fuel.

Click here for more advice on using ethanol fuel in motorcycles.

Source: MotorbikeWriter.com

Classic Motorcycle Shipping Guide For Beginners

Buying a sweet ride and needing a Motorcycle Shipping Guide For Beginners to get it home to the US (Sponsored post)

Everyone has a dream. And everyone has interests. Some people love shoes, some love buying houses, others enjoy fine art or French cuisine. And then, there are those who love smooth sailing or liberating rides. Sometimes it’s in a nice chevy, and sometimes in a beautiful Harley. There’s nothing like cruising the roads on your loved motorcycle to clear your mind, make your heart beat faster, and put a grin on your face. Owning or buying motorcycles sometimes requires shipping them cross country. Riding your two-wheeler may be nice, but riding cross country can be a bit tiring and difficult for your body. If you have to ship your beauty, we have a motorcycle shipping guide for beginners, so we got you as covered as you’d want your bike to be while in transport.

Having a bike to ship is essential for reading a motorcycle shipping guide

To transport a bike, you need to have one. You can be a motorcycle aficionado or just a guy who likes to buy vintage rides and fixing them up on your own. But you’ll need a way to ship it to your doorstep. Classic motorcycles can come at steep prices, so many people cruise online and search for auctions to find their sweet ride. But, buying bikes from outside of the US can eventually be cheaper. Or, you might be traveling abroad and stumble upon a beautiful 1953 Vincent Black Shadow and you have to have it. You convince the owner you’ll take good care of it, and after long negotiations, you agree upon a price. Now, the remaining question is – How to import a motorcycle from the country of purchase to your own? Don’t worry, it is a common procedure and there are specific rules, so just do the research, get all the documents you might need, and prepare to pay up big time. Which brings us to another point – you should calculate is it, in the end, cheaper to buy locally or internationally.

gold and green motorcycle
Beauty is in the eye of the beholder

Moving house

If you are relocating an entire household, the process may be quite exhausting as it is. Moving to a different city or a country and transferring your family and everything you own is very complex. You shouldn’t try to be a hero and do it all on your own but get some help. Get all the help that is offered or you can find. If you are moving in or out of Burlington, there are great Burlington-based moving experts at your disposal, so don’t hesitate to call them. They will help you with the move and you will have the time and the energy to take care of all other parts of the move – finding schools, changing address and utilities, and all that needs to be done. Should you have a motorcycle in your garage, chances are you won’t be able to ride it into the sunset in this particular moment, so you really need to check out all the shipping companies around you. You need someone to take care of your precious baby as well as you would.

What are quotas?

Motorcycle shipping can be quite expensive. Especially for international and overseas shipping. So, at the very beginning, you should research all the shipping companies you can find. The price will vary depending on many different factors – whether you’re shipping in a container or air freight, the size and weight of your bike, the distance of shipping, and some other things. As we said, sometimes it’s less expensive to buy locally for a higher price, than internationally for less. We know you would rather spend your money on some rare and exotic motorbikes that up for auction, but getting your already owned bike safely home is as important.

Didn’t we just mention quotas in this motorcycle shipping guide?

So, many companies will provide you with a quota online – an estimate of the price, so you can have an idea of the cost prior to making arrangements. Different companies will have different prices, so computer generated quotas can be a faster way to assess and make a selection of a few companies. But, don’t let the price be the only deciding factor. What kind of a motorcycle shipping guide would this be if we wouldn’t advise you to take a better look on how the company works, how much experience they have, how will they secure your bike? Make sure to check user reviews as well, and ask around with people who have done it before. They will tell you what to take care of. 

You don't need a motorcycle shipping guide to know you have to take good care of this baby Alt text: red motorcycle on the street in front of wall and door
You don’t need a motorcycle shipping guide to know you have to take good care of this baby

Insurance

With everything you do, you need to ensure you are covered. Especially with things that are out of your hands. So, before you embark on the journey of bike shipping, make sure to get insurance. Check the policy and know what to expect. If the shipping company damages your bike, doesn’t follow loading rules, or it doesn’t use soft straps in strategic places and your bike gets scratched, tips over or worse, they need to reimburse you for the damage. Ask the carrier about its liability coverage. This step in a motorcycle shipping guide is not to be jumped over! If you need some help, ask for it. As we mentioned, when you’re moving you choose a reliable moving company, such as number1movers.ca. So, there is no reason not to do the same with shipping companies.

Preparing the motorcycle for the shipping  

There are some things you should do prior to loading your motorcycle on the truck:

  • Check for the state of your bike – take notes and photos of all the damages, scratches, or mechanical issues. Or lack thereof. In case something goes wrong, you will have the proof of the prior state of the vehicle.
  • Wash your bike – this can highlight the damages and save you from a cleaning fee at the other end
  • No fluids – drain all the fluids from the motorcycle – fuel and oil. Leave just enough you can move it at the end.
  • No accessories – remove any items you may have on the bike. Don’t forget the GPS or any type of holders, and check the trunk as well.
  • Unplug the battery and release some air out of your tires.
motorcycle in the sunset
Is there a better view?

The means of shipping – the core of the motorcycle shipping guide

There are different ways to transport your motorcycle. The decision is yours, and it depends on your preferences, type of motorcycle, and the destination. When you have a classic ride, you will want to tuck it in and smoothly ship it back home, so you probably don’t want to share a crate with other bikes. If you are shipping overseas, you can choose to airfreight it or ship it in a container across the ocean. Know that air freight is faster but more expensive. If it’s inbound shipping your motorbike can be individually crated or crated with other bikes. Individual crates provide more security and cost a little more. Make sure your bike is stabilized. It is better to stabilize it vertically, than a side stand. Once your motorcycle is crated, it needs to be tied down, so make sure the ties are soft and placed in strategic locations, fastened and stable. 

Make sure to use a specialist motorcycle transporter. Only with their help will you be certain everything will be okay. You have certainly planned to go through all the scenic motorcycle rides in Europe as a Harley lover, so your prized bike needs to arrive safely.

What have we learned from this motorcycle shipping guide?

What you need to pick up from this motorcycle shipping guide for beginners is that motorcycle shipping is a process that can be quite lengthy, costly and tedious. But if you make sure to choose the right shipping company, get insurance and follow through, you will be fine. You have found your ride, now put your helmet on and go enjoy a ride to the sunset, you’ve earned it!

Source: MotorbikeWriter.com

Mythbusting: Green Light Trigger

We recently received a Green Light Trigger unit which is basically two powerful magnets that attach to the underside of your motorcycle and promise to trigger a green light.

Read on and find out if the Green Light Trigger actually works!

Why lights won’t change

Most riders have experienced the frustration of a traffic light that won’t budge off red because it cannot detect their motorcycle which is smaller than a car.

We contacted several state transport departments for their technical advice.

They say these lights are controlled by an inductor loop cut into the pavement.

It creates an electro-magnetic field and detects ferromagnetic metals such as iron, cobalt, nickel, steel and manganese.

Some people erroneously believe these rectangles are actually scales that detract the weight of vehicles and therefore don’t pick up light motorcycles!

For the best possible detection of the metal in your motorcycle, you should position your bike longitudinally right above one of the cut lines.

GReen LIght Trigger traffic lights detect
Stop over that centre longitudinal cut line

If there are two rectangles cut into the pavement, line up over the centre line for the best effect.

Be aware that lining up over a side cut line next to a running lane exposes you to the danger of being rear-ended by an errant driver straying out of their lane.

It has also been suggested that if you deploy your side stand directly over a cut line it will help trigger the lights.

We tried it and it doesn’t seem to work, but it may depend on the metal composition of your sidestand. Some modern motorcycles have non-ferromagnetic alloy sidestands to save weight.

Sensitive issue

The transport departments tell us the the sensitivity of the loops is set to detect all vehicles.

However, sensitivity is a delicate balancing act: too low and it won’t pick up a motorcycle or bicycle; too high and it will pick up false readings for cars in adjacent lanes.

If you believe the sensitivity is set too low at a set of lights, you can contact the relevant department in your state or local council area and ask for it to be increased.

Green Light Trigger

But what about this $US30 Green Light Trigger which is basically two powerful neodymium or rare-earth magnets?

The science suggests they could work because the inductor loop creates a magnetic effect which should detect other magnets: either attracting or repelling.

I tried it out on my Triumph Street Scrambler and a Kawasaki Versys 1000 test bike which do not trigger a set of lights near my home in western Brisbane.

The Green Light Trigger made no difference.

Believing the sensitivity is just too low, I tried another set of lights where my bike does trigger green.

GReen LIght Trigger traffic lights detect
Green Light Trigger can be attached by the magnet or a cable tie

Instead of using my motorcycle which I know is detected, I placed two of the Green Light Trigger magnets directly on the cut lines. They failed to trigger the lights.

I gave the device to a friend who has complained about lights near his house which don’t detect his bike and he says it worked.

However, RACQ technical officer Steve Spalding is sceptical, believing that the lights may simply have changed as part of the scheduled traffic pattern.

Traffic phasesred light cameras trigger

RACQ Principal Traffic and Safety Engineer Gregory Miszkowycz says if your motorcycle is detected, it won’t necessarily speed up the light change process.

“It just registers a demand for that movement in the traffic controller,” he says.

“If all movements at the intersection have a vehicle waiting, the traffic controller will move through its usual pattern or phases of traffic movements at the intersection.

“There may be three to four movement phases at a typical intersection as all the different movements receive their turn before it returns to the first phase again, which is one complete cycle, usually 60-100 seconds in total. 

“Some intersections at certain times of the day will ‘skip’ certain phases where there are no waiting vehicles. This improves the efficiency of the intersection and reduces delays for motorists by not wasting green time.

“In essence, this speeds up the light change, but only because the traffic controller has skipped other unnecessary phases. 

“There are other intricacies of vehicle detection, like terminating a right turn movement as soon as the queue has gone. It is all to squeeze the most out of the intersections and minimise lost time.”

Source: MotorbikeWriter.com

How to Take Good Care of Vintage Bikes

(Sponsored post)

Whether you’re a casual collector or a real motorcycle aficionado, you probably turn your head whenever you catch a glimpse of a vintage or classic motorbike. One day, you might even own one yourself. Anything that has gone past the 20-year mark is already considered a bit of an artefact. As such, any vintage bike deserves the utmost care.

It doesn’t matter if you plan on taking the historic bike on a joyride or just have it displayed, proper maintenance is not just an afterthought. Give a vintage bike the treatment it deserves using this essential guide.

1. Do your homework

Before anything else, you will need to learn a lot about the specific make and model you own. Manufacturers set their own standards when it comes to designing and manufacturing their motorcycles, so make sure you do ample research about yours and the features that they were able to roll out. This should give you a good idea on how best to maintain these features and keep your motorbike in tip-top shape.

2. Search for manuals

The most useful resource you can have for fixing or maintaining an old bike is their original manual, if you can find them. If your vintage bike is really vintage, you might have some difficulty tracking one down. However, it’s worth the effort to get one. This should give you all the more reason to search online for manuals that can help you avoid making any costly errors on a vintage beauty.

3. Consider a thorough check-up

You just can’t rely on your gut to know if you’re going the right way in terms of maintaining a vintage bike. When in doubt, you might want to consider bringing the vehicle to someone who has experience working on vintage models. A thorough check up is in order if you’re planning to detect any aesthetic or performance issues worth correcting. Through the right professional, you should be able to save a ton of money and keep your motorbike from further deterioration.

4. Go for a full refurbish

Restorations can be expensive, especially if you’re looking at motorbikes that have been around during the 1950s such as the Ariel Leader or the Moto Guzzi Cardelino. The secret here is effective motorcycle detailing. Consider giving the bike a brand new finish by applying a new coat of wax. You might also want to keep the rims shiny and replace worn out leather with more durable material – all this without sacrificing the overall vintage look and feel of the bike.

5. Know where to get your parts

Much of the challenge to maintaining a vintage bike is knowing where to get parts. Luckily, a quick Google search will yield numerous online stores selling replica parts, if not original ones. Either way, it makes for an easier way to keep the bike in good condition just in case the crankshaft fails or if the brakes have become worn out.

Vintage motorbikes are a beauty to behold, but they are also a mess when it comes down to maintaining them. With these tips in mind, you can rest easy knowing that it’s possible to pamper an oldie but goodie.

Source: MotorbikeWriter.com

Preventing Motorcycle Theft With Modern Technology

(Contributed post on preventing motorcycle theft)

It’s not groundbreaking news to say that motorcycles get stolen from time to time, and part of the problem is the lack of care that owners take in preventing it from happening to them. Even if by some miracle your stolen motorcycle is recovered, I think it’s safe to say that you would rather not go through the ordeal to begin with.

That’s why that old adage about prevention being better than a cure exists. If you take the extra measures necessary to secure your motorcycle, you can do a lot to discourage would-be thiefs and prevent it from ever happening.

So, what exactly are those extra measures?

Use or Install:

Motorcycle Starter Kill Switch

Most modern motorcycles come with a kill switch already installed, but if yours doesn’t you might want to get one. Kill switches are one of the most effective ways of preventing theft. Here’s how they work:

When a key is turned in the ignition, electricity begins to flow from the battery to the engine. This starts a circuit that will eventually cause the motor to engage, thus allowing fuel and air to ignite.

A starter kill switch interrupts this process by preventing electricity from reaching the spark plugs.

Installing a hidden kill switch on your bike ensures that your bike doesn’t start unless the kill switch is disabled. Make sure to shut your bike off with the kill switch because this engages the kill switch.

Disc Brake Lock

Brake locks preventing the wheels from turning will stop thieves rolling with your bike. And while it’s an effective deterrent, it takes up significant storage space and it can be quite inconvenient to install and remove, making it not as popular as an anti-theft device. People who do use them generally only do so when they’re going to be away for a long time.

Anti-Theft Alarm

While this measure is nothing new, it’s one that has proven to be effective at keeping thieves away and alerting people to the thieves that aren’t discouraged by it. Just make sure to have the alarm sensitivity tuned properly.

Do:

Park Within FOV of Security Cameras

It’s standard procedure for thieves to scout an area for security cameras before they attempt to steal anything. Parking within the field of view of security cameras helps you identify thieves if they aren’t outright discouraged.

Park Near Other Motorcycles

There are two main benefits of parking near other motorcycles. The first is that your bike is less likely to be singled out. And even if that fails, more bikes means that there’s going to be more people around the area. Riders usually look out for each other and this is often more than enough to prevent theft.

If All Else Fails: GPS Locator

While having a GPS locator installed in your motorcycle might not be much of a deterrent, you’d be happy to have it when you need it. It helps the authorities find your bike much quicker. At which point, you can recover your motorbike either by heading to where it is, of having it transported to you through motorcycle shipping if you’re overseas.

Source: MotorbikeWriter.com