Tag Archives: Features

Australian Motorcycle Industry | State of the Nation

Australian Motorcycle Industry

There are numerous challenges that the Australian motorcycle industry confronts, here I touch on a few that I feel are perhaps some of the most important.


Fun – Fast – Frugal – Affordable

Most of us, no doubt you included, first got involved in motorcycles because they were fast and offered unbelievable thrills. While remaining practical enough, affordable and frugal enough to be used for mundane day to day tasks like commuting and the like.

Yamaha's MT-09 is one of the few big sellers bucking the trend of being cheap entry level options
Yamaha’s MT-09 is one of the few mainstream bikes not at the lower end of the scale that is actually performing well in the marketplace.

Advertising constraints largely prevent brands from really showcasing the fast and fun aspects of motorcycling. Across my own media channels I do like to portray the fun, the fast, the thrill and the daring-do that first got me interested in motorcycles. No doubt some of this is perhaps frowned upon, but for a lot of us, it remains what motorcycling is predominantly about, and what keeps many of us involved.

I also acknowledge that some people enjoy a casual ride in the country at a slow pace and just enjoy the scenery, with no real interest in the performance aspect of motorcycling. It is a lifestyle decision, largely with a significant social aspect with group rides and the like.

The 2018 Softail Breakout
The 2018 Softail Breakout is one model to be somewhat bucking the negative sales trend, but overall Harley-Davidson is down by over 20 per cent.

It is interesting to note that most of the top selling road motorcycles are relatively low priced. Only the Harley Breakout and Yamaha MT-09 buck that trend in a road bike top ten that is largely populated by affordable learner machines.


Barriers to entry are larger than ever before

The days of cars being much dearer to buy and run than motorcycles are gone. $20k gets you a nice small car that gets comparable fuel economy to most motorcycles, while keeping you dry and cool or warm, depending on where you set the climate control, and generally also cost a lot less to service. However, people interested in 20k cars as their sole mode of transport are probably not going to be those most predisposed towards motorcycling.

The barriers to getting a motorcycle license and the costs incurred today are frightening. In many states new riders have to wear ridiculous high-vis vests for a number of years (which have proven to be of no help), and just how cool is that… New riders in some states are not allowed to carry passengers for their first three years on two wheels. My mother was taken to hospital on a motorcycle while in labour, and brought home from the hospital with bub in a motorcycle sidecar! Times have certainly changed, rules, rules and more rules. 

No need to scare yourself to have fun on the MT-03, whether you're a learner or experienced rider
Yamaha’s MT-03 learner bike, based on the YZF-R3

It is a four-figure exercise these days to become fully licensed in many states, and things are being made harder every year.

A case in point is the new regulations in Queensland that further restrict the training of new riders, and are causing problems for training providers who are incensed at new restrictions.

When most of us started out riding registration costs for motorcycles were a fraction of what it cost to register a car, that is no longer the case. The likes of MUARC and nanny-state governments have truly cut the industry off at the knees. But it is a death by a thousand cuts rather than a necking.

The fact that despite the barriers to entry, the sales of beginner motorcycles have been strong in recent years is immensely encouraging. However, I do believe the barriers to entry are keeping many more away from motorcycling than otherwise would be involved, and loving it.

Honda CBE
Gone are the days of motorcycling being a cheap alternative, unless you’ll settle for something like Honda’s best selling CB125

Right now you would have to be very determined to get on a motorcycle for the first time, and also be doing pretty well financially. Those taking the plunge and joining our ranks, I salute you! 


Do we give up on the toe-the-line attitude?

Do we need to harness the rebellious aspect of motorcycling again somehow?

Despite the capitulation of the populace to these truly preposterous regulations, if governments are going to put more and more restrictions on us, do we start putting two fingers up at them, and be seen to be doing so publicly….?

Dave McKenna wearing a Shark Spartan Carbon while stunting on his MT-09.
Dave McKenna stunting on his MT-09 – With policing focusing on the smallest infractions riders are at constant risk, which has an impact on the appeal of motorcycles

They hate us and want rid of us anyway, thus in my eyes we have nothing to lose by poking the bear, and perhaps even something to gain by bringing a bit of the rebel aspect back to motorcycling.

Unfortunately, with Australian now perhaps the most wowser country in the world, they will just make more rules, and make life on two wheels harder again… 


Electric Motorcycles – Could they be a savior?

Will we have to wait until the first influx of genuinely good and practical electric motorcycles to really excite the public with something new that they want to be part of? Or will government departments do their best to cut that new direction off at the knees via yet more draconian barriers to entry?

Harley Davidson LiveWire
Harley-Davidson’s LiveWire electric motorcycle represents the future of motorcycling in many ways

Police harassment is most certainly an issue

Police harassment of motorcyclists is also most certainly an issue, along with the now borderline insane penalties for minor traffic offences. Guilty until proven innocent, the penalties are beyond my comprehension when compared to what people get for bashing innocent people senseless… For the real few menaces to society that just don’t get off completely scot-free that is. 

Police media units craft every single piece of news relating to motorcyclists into a jaundiced story and negative headline. Even where there is a positives to be found, there will be no strong mention of them, just that every single thing ever related to motorcycles has to have a negative connotation reinforced by the police. This then translates into headlines in the mainstream press regarding motorcycles to overwhelmingly always remain negative. 

A middle-aged female friend moved to Victoria from NSW a few years ago. She is short of stature and rides a professionally lowered ZX-6R, so she can get her feet on the ground to provide her with a little more confidence and security. The following story is so ridiculous you would think it fiction, but I assure you it is fact.

On her very first ride in Victoria she was pulled up in Healesville with a number of other motorcyclists for a licence check and vehicle examinations. She was given a defect notice for worn hand-grips, despite the fact that the grips on a ZX-6R, like most modern motorcycles, have no real grooves but are instead smooth from new.

Harassment for the sake of it, pure and simple. But it gets better. With that behind her, the next ride again took her out of the city for a coffee in Myrtleford. A passing policeman noticed her bike looked a little low, questioned her on it and was told it was professionally lowered by a motorcycle suspension specialist to cater for her very short stature.

The 2013 Kawasaki ZX-6R 636cc version

She was then told that she needs to carry an engineers certification with the motorcycle to prove her machine was legal. So on her second ride in Victoria she had her second defect notice. A soul destroying experience and enough for many to give it away for good.

25 km/h over the limit in some states now incurs an automatic three-month suspension of your licence. It is certainly much harder to stay closer to speed limits on a motorcycle than in a car, especially now that so many of the limits on favoured motorcycle routes have been lowered.

The risks of accidental licence loss are always present. This has led to many riders electing to ride enduro bikes in the bush as an alternative to suffocating from the strain of trying to never stray over the limit on the road. Which really can take the enjoyment out of road riding in this day and age. 


How do we combat the regulation and harassment that motorcyclists face

I myself have had meetings with ministers over the years when lobbying for access to off-road riding areas, and have been invited to, and spoken at, motorcycle safety conferences. I have a very basic understanding of how to deal with government, but the time and effort it takes to achieve any real progress is astounding. You also quickly learn that political staffers are the gate-keepers, and are the ones that really run the country. 

It is very hard to successfully deal with government agencies, thus why ex-politicians and their staffers are tapped for their knowledge of how to walk the halls of power and gain influence by large industries. This knowledge and access costs money, serious money. 

Industry campaigning resources within the FCAI are limited and the industry is hurting financially, but perhaps there is a case to be made for increased funding to facilitate the use of people who lobby government as a full-time career, and are smart as to how they go about it. But then, achieving consensus as to what issues to fund could prove difficult among FCAI members.

Trev on the KTM 1290 Super Adventure R
Trev on the KTM 1290 Super Adventure R off road – Even getting off-road access can involve paperwork these days

Without further efforts in these areas though things are only going to get worse for us in regards to barriers to entry. Not only that, it may see many seasoned riders give up, deeming it just all too hard.

The fact that 2.1-million Australians hold a motorcycle licence, yet there are only around 870,000 registered motorcycles in Australia suggests that many out there have already found it all too hard and hung up their helmets.

Many of us still riding have many registered motorcycles in their garage, thus that 870,000 registered motorcycles could realistically extrapolate to a figure of 400,000 or less people actually currently owning motorcycles. With more then 2.1-million licence holders that makes the current participation rate, by my reckoning, at around 20 per cent…


Finances

Of course current political instability and debt burdens also play their part in restricting motorcycle purchasing activity. Recently, obtaining motorcycle finance at good interest rates has never been easier, but it does not seem to have helped sales numbers all that much. Or perhaps it has, and if not for the ease of finance in recent years things would be even more dire.

However, while credit has been easy of late, lending restrictions have now got much tighter in this space also, and this is already having a significant flow-on effect. Some would even say that finance is the real crux of the matter right now, and the factor primarily responsible for this most recent downturn. 

Royal Enfield Interceptor Scene
High living expenses are also a weight on everyone’s shoulders, explaining the popularity of competitively priced machines, especially in the LAMS segment

Young people having student loans to pay back, when earlier generations had no such swords hanging over their heads, or the truly insane property prices to worry about if youngsters actually hold a distant vision of hope to get on the real estate merry-go-round.

Those going to trade school and/or starting apprenticeships are also more likely to need a reliable work vehicle that can carry the tools of their trade. However, these days young tradies do relatively well, and are quite likely to have a dirt-bike in the shed for some weekend fun rather than owning a road bike. Particularly as riding on the road can be so hazardous to ones licence.


Fewer reasons than ever to upgrade

Sports-bike sales are in the toilet, no doubt about it. These days there is no need to buy a sports-bike to have amazing power, powerful brakes, and excellent suspension.

15 years ago you could only get big power, awesome brakes and excellent suspension by buying a sports-bike, nowadays that is simply not the case. Even ten years ago, who would have imagined that we could buy 170 horse-power adventure bikes with massive Brembo brakes and awesome suspension, or 200 horsepower naked-bikes for that matter..?

Ducati Multistrada Enduro
Ducati sales are down 22 per cent

Nowadays, pretty much every large capacity motorcycle on the market offers outstanding performance in every area, there really is no need to buy a sportsbike unless track days are your bag.

I believe that is the seconday reason behind the downturn in this space, close followed by the increasing penalties for accidental speeding. 

The fact that the state can potentially take ownership of your vehicle for what once would be a relatively minor speeding offence, makes me want to set government buildings on fire and smash windows. 

Thus, unlike earlier decades, performance is hardly a criteria for many to upgrade, as the level of performance of most motorcycles made in the last ten years is already brilliant. What really is there to gain by upgrading to something newer… ?

New machines are offering ever more amazing technology, but is upgrading getting harder to justify for many riders?
New machines are offering ever more amazing technology, but is upgrading getting harder to justify for many riders?

The move by some brands to increase their warranty periods out to three years is, I believe, a good move that will help shift new motorcycles. Still, it is a long way from the almost normal five or even six-year warranty periods now offered on new cars.

New technology such as the latest TFT dashes with integrated navigation prompts and Bluetooth etc certainly appeals to many, myself included. 

The fixed price servicing package recently introduced by BMW, for example, could also help encourage riders to trade up to something newer. 


On the dirt

Dirt-bike sales are also suffering, but currently the off-road market is faring a little better than the road segment. Sales of kids starter bikes like the PW50 and CRF50F are still very strong and are now the backbone of the off-road market.

Honda's CRF Kids/Juniors range - The CRF50F, CRF110F, CRF125F and CRF125FB
Entry level options for the kids off road remain popular, like the CRF50F, CRF110F, CRF125F and CRF125FB

It seems consumers have been burnt by the cheap Chinese crap that hit the market years ago, and have now returned to trusted brands that deliver a much higher quality product. The competition between the bikes in this space though is fierce and profit margins tiny, which isn’t going to help keep dealers doors open.

It is also interesting to note than in an enduro segment, which in recent years has got more and more hard-core, and much more expensive, numbers are actually still pretty strong. 

While sales of motocross bikes do ebb and flow a little, the trend is downward. The racing scene seems to be in trouble in most states, and finding somewhere to ride your motocross bike, legally, is certainly problematic. Theft problems are also rife, and yet add more hassle to the ownership experience for many. 

We have had some wins, such as the Recreational Registration Scheme used in Victoria now expanding to other jurisdictions. It remains though that for younger riders the only place to legally partake is on private land, which is a huge impost for regular folk.


Summary

There are no easy answers but I do believe that the barriers to entry are much larger than ever before, and are the biggest challenge in getting people on two wheels. If you think motorcycles are fast, fun and cool, then having to wear a poxy high-vis vest everywhere can certainly put a dampener on things. Nobody could ever convince me this preposterous affront has been mandated due to safety reasons.

The affordability and frugality of modern cars and their convenience can also not be overstated.

For seasoned riders the reasons to upgrade to a new motorcycle are also fewer than ever before. Wearing all that depreciation on your current mount to gain something of nothing by going to a newer motorcycle, particularly if again purchasing a mount in the same genre of motorcycling, along with the upgrade costs which are then also subject to the accompanying government charges that go with it, means you really have to want that new bike…

In my opinion, the pandering to social media ‘influencers’ and the ‘hipsters’ has only brought motorcycling down in status. It also seems that the brands that have invested the most in this route, instead of looking after their core customers, are the brands that are currently hurting the most in regards to declining sales.

That said though, it was worth a try as the motorcycling demographic shows few signs of getting any younger… I am just not sure ‘influencers’ are ever going to have much real impact with young Australians, especially when virtually all their apparent social media ‘followers’, even the likes that weren’t just bought fakes, and are actually real people, are not even in Australia…

One thing is clear though, waiting out the downturn and doing nothing is not really an option. One less motorcycle sale equals one less finance or insurance sale. The knock on effects of someone actually getting out of riding altogether also leads to less consumables such as tyres, oils, pads, chains etc. and a lesser need to visit a motorcycle workshop.

Ten years ago a previous downturn caused many motorcycle dealers to close their doors. We are again on a precipice where many more dealers, many of whom are good, honest retailers, could be forced to shut up once and for all.

Yes, almost all workplaces and industry have to evolve, and adapt to changes in Australian society, and some dealers can also be their own worst enemy. But if you know a good one that does deserve your support, now might be a good time to show them a little custom, as every little bit helps. Trying to retain good staff in trying times is another massive problem that dealers face.

TeamMoto Sale Yamaha
More motorcycle dealers will go to the wall

Please air your thoughts on the subjects I have raised in the comments section below, even if you vehemently disagree with me, as I know I certainly don’t have all the answers… Bring forth your own pearls of wisdom….

Source: MCNews.com.au

Capriolo Cento 50 flat twin | An early boxer with a difference

The Capriolo Cento 50 flat twin

With Phil Aynsley

The previous column talked about the Capriolo 75. This week an even more unusual Capriolo is featured.

Capriolo PA Cento
A rare Capriolo is this Cento 50

The Cento 50 (150) was debuted at the Milan Show in 1953 and is a rare example of a non-BMW influenced flat twin and also the smallest capacity such design to make production.

Capriolo PA Cento
The Cento 50 was notable for the 150 flat twin powerplant

The pressed steel frame was very similar to the 75’s and the motor also carried over some features, such as usage of face-cams. The pressed steel Earles fork of the prototype was replaced by a normal telescopic fork for production.

Capriolo PA Cento
The chassis was also similar to the Capriolo 75’s

Notable advanced features included indicators within the tail light and a neutral indicator light. A single carburettor was used, partially housed within the rear of the engine unit for a very clean appearance. Output was 8 hp and top speed was 95 km/h.

 

Capriolo PA Cento
Power output was 8hp, enough for a top speed of 95km/h

Two versions were produced, with the later (coming in 1955) being easily distinguished by the full width brakes.

Capriolo PA Cento
Capriolo Cento 50

Production ceased in 1956. Only some 500 were built making this sophisticated motorcycle highly collectable.

Capriolo PA Cento
Only 500 of the Cento 50 were made in two versions, making them very collectable
Capriolo PA Cento
Capriolo Cento 50

Source: MCNews.com.au

Capriolo 75 | Capriolo 75 Sport

With Phil Aynsley

PA Capriolo
Capriolo 75

Capriolo was the motorcycle division of the famous Italian aircraft manufacturer Caproni (and named after the local alpine deer).

PA Capriolo
The Capriolo 75 was produced when the Italian firm was banned from aircraft production following WW2

When Italy was barred from producing aircraft after WW II, Count Caproni turned to motorcycles (as did Aermacchi). In fact among their first projects was producing the frame for the first Ducati motorcycle, the 60.

PA Capriolo
The brand actually produced a frame for the Ducati 60

The 75 was introduced in 1951 and production continued until 1958.

PA Capriolo
The Capriolo 75 Normale had a distinctive frame

This 75 Normale is the second version (circa. 1957) of the 75, which featured revised engine parts (mainly the clutch) and hydraulic rear shocks in place of the earlier friction damper types. The front forks were also updated.

PA Capriolo
This later version (a 1957) featured updated suspension and clutch

The motor was unusual in having a longitudinally mounted crankshaft with the flywheel at the front. To complete the weirdness a face-cam system was used instead of a normal lobe cam.

PA Capriolo
Capriolo 75 engine cut-out

Output was 3.5hp at 6000rpm and a pressed steel frame which encompassed the tank was yet another unusual feature.

PA Capriolo
Capriolo 75 engine cut-out

With Count Caproni’s death in 1957 the company was reorganised and renamed Aeromere (Areo Meccanica Regionale).

PA Capriolo
The brand was later renamed Areo Meccanica Regionale

A new line of bikes was then designed including a new 75. Capriolo was taken over by Laverda in 1964.

PA Capriolo
Capriolo 75

Being an Italian company, of course a 75 Sport was soon introduced (1952). It made 4.5hp at 7,500rpm.

PA Capriolo
Capriolo 75

PA Capriolo
Capriolo 75

PA Capriolo
Capriolo 75

PA Capriolo
Capriolo 75

PA Capriolo
Capriolo was taken over by Laverda in 1964

PA Capriolo
Capriolo 75

PA Capriolo
Capriolo 75

PA Capriolo
Capriolo 75

PA Capriolo
Capriolo 75

PA Capriolo
Capriolo 75

PA Capriolo
Capriolo 75 ‘Sport’

PA Capriolo
Capriolo 75

PA Capriolo
Capriolo 75

PA Capriolo
Capriolo 75

Source: MCNews.com.au

Sanvenero 125 and 500cc GP Racers from the 1980s

Sanvenero 125cc & 500cc GP Racers

With Phil Aynsley

Emilio Sanvenero (a building contractor) was an enthusiastic bike racing fan and already a sponsor of MBA when he set up his own company in 1980 to produce race bikes with the aim of competing in the following year’s 125 and 500 World Championships.

The 125 proved to be quite successful with team riders Guy Bertin and Richard Tormo both winning a race and finishing 6th and 8th respectively in the ’81 season. In 1982 MBA closed and most of the staff moved to Sanvenero.

PA Sanvenero
Sanvenero 125cc GP Racer

Tormo was joined by Pier Paolo Bianchi in the 125 class, with Tormo winning the Belgian GP but finishing the season in 4th, one point behind Bianchi’s 3rd.

PA Sanvenero
Sanvenero 125cc GP Racer

After Sanvenero folded (during the German GP!) Bianchi was able to obtain several 125s from the receivers and continued to race them during 1983, scoring three podiums and 8th in the championship.

PA Sanvenero
Sanvenero 125cc GP Racer

This 125 is fitted with a special swingarm designed by Antonio Cobas.

PA Sanvenero
Sanvenero 125cc GP Racer

The 500cc project was both far more ambitious and far less successful. The engine was inspired by Suzuki’s RG500, but used a shorter stroke.

PA SanveneroGP
Sanvenero 500cc GP Racer

The crankcases were made by Campagnolo, the crankshafts by Hoeckle and pistons by Mahle. The first frames were made by Nico Bakker but a home-grown chassis was soon used.

PA SanveneroGP
Sanvenero 500cc GP Racer

At least four bikes were constructed during the ’81-’82 seasons. Riders were Carlo Perugini (no points) in ’81 and Guy Bertin (no points) & Michel Frutschi (14th) in ’82.

PA SanveneroGP
Sanvenero 500cc GP Racer

Indeed Frutschi won the French GP at Nogaro after all the top teams boycotted the race due to safety concerns.

PA SanveneroGP
Sanvenero 500cc GP Racer

When the team was declared bankrupt during the German GP at Hockenheim in September the circuit took possession of the two bikes entered and one can still be seen in the circuit museum.

PA SanveneroGP
Sanvenero 500cc GP Racer

The two ’81 bikes are in English and Italian collections while the one I photographed is with a German collector, was mechanically restored over 2012-13 and was ridden at the Bikers Classic meeting at Imola in 2013. It is in original condition (apart from the tyres), including the paint.

PA SanveneroGP
Sanvenero 500cc GP Racer

PA SanveneroGP
Sanvenero 500cc GP Racer

PA SanveneroGP
Sanvenero 500cc GP Racer

PA SanveneroGP
Sanvenero 500cc GP Racer

PA SanveneroGP
Sanvenero 500cc GP Racer

PA Sanvenero
Sanvenero 125cc GP Racer

PA Sanvenero
Sanvenero 125cc GP Racer

PA Sanvenero
Sanvenero 125cc GP Racer

PA Sanvenero
Sanvenero 125cc GP Racer

PA Sanvenero
Sanvenero 125cc GP Racer

Source: MCNews.com.au

Soriano Tigre | Obscure Spanish motorcycles | R.Soriano SA

Obscure Spanish motorcycle marques

1944 96cc Soriano Tigre

With Phil Aynsley


As a change from obscure Italian marques how about an obscure Spanish one?

PA Soriano
1944 96cc Soirano Tigre

R.Soriano SA was founded in Madrid in 1941 by the impressively named Ricardo Soriano Hermensdorff von Scholtz, Marquis of Ivanrey.

He was quite a talented engineer who lived in France, Switzerland and Spain at various times. He designed and built a range of small two-wheelers but not before some interesting stops along the way!

PA Soriano
1944 96cc Soirano Tigre

In France he and a fellow marquis built the Soriano-Pedroso car from 1919-1924. In 1930 he turned his attention to outboard racing engines for hydroplanes.

Both four and six cylinder OHC designs were built with OSSA manufacturing a small run of the four cylinder motor (a supercharged 658cc unit).

PA Soriano
1944 96cc Soirano Tigre

The six cylinder was closely based on the four and a modified (to DOHC) version powered Jean Dupuy to the World Speed Record of 79.04mph in 1939.

An intriguing development came in 1942 when the US Army Corps of Engineers asked Evinrude to adapt the Soriano motor to power what became known as Storm Boats.

While their modified design was highly thought of, without any original plans or machine tools, it could not be made in the required time frame, so the project was abandoned.

PA Soriano
1944 96cc Soirano Tigre

In a precursor to Soriano’s own motorcycles, Manuel Giró (the founder of OSSA) fitted one of the supercharged fours to a BMW chassis, then later a sidecar, on which he won the Spanish Championship just after the war!

After a few prototypes made before the war, the first Soriano bikes were manufactured in 1942 and were designed to be a “people’s motorcycle” – not dissimilar to the Vespa concept of 15 years later.

PA Soriano
1944 96cc Soirano Tigre

A feature of the bike was the use of small, 8 inch diameter wheels – which made for a very compact, “unthreatening” bike. In 1944 the improved Tigre model was released, followed by the Puma, Lince (Lynx) and Pantera.

About 6000 Sorianos were produced before the company quit the motorcycle business (they also made industrial motors, generators and the like).

PA Soriano
1944 96cc Soirano Tigre

This bike is a 1944 96cc Tigre. And as a final piece of trivia, the Tigre featured on a stamp issued by the Republic of Equatorial Guinea in 2003!

1986 Heron Suzuki TSR08 GP Racer

Ciba-Geigy Bonded Aeroweb frame made by Nigel Leaper

With Phil Aynsley


PA Heron Suzuki
1986 Heron Suzuki TSR08 GP Racer

At the end of the 1983 season Suzuki officially retired from the 500cc GP championship as their venerable square four design (first seen in 1973) was no longer competitive.

PA Heron Suzuki
1986 Heron Suzuki TSR08 GP Racer

However the factory continued to support the Heron team in the UK and the Galina Team in Italy – Roberto Galina HB Suzuki Team TGA1 | 500GP (link).

PA Heron Suzuki
1986 Heron Suzuki TSR08 GP Racer

Heron decided to invest in a new, light weight chassis made from Ciba-Geigy Bonded Aeroweb (a honeycomb/composite) material, constructed by Nigel Leaper. The first two prototypes were made with an aluminium cladding (painted white) but the following six frames just used the (black) honeycomb material.

PA Heron Suzuki
1986 Heron Suzuki TSR08 GP Racer

Records show that this bike (TSR08) was the last one constructed, in 1986, and was ridden at Spa by Kevin Schwantz to 10th place (in Rizla colours) – his first points in Grand Prix.

PA Heron Suzuki
1986 Heron Suzuki TSR08 GP Racer

Later in the season it was ridden by Niall MacKenzie in the Skoal Bandit colours seen here. He scored three top ten places and was on the front row of the grid for the last race of the year, at Misano.

PA Heron Suzuki
1986 Heron Suzuki TSR08 GP Racer

The motor was the final version of the square four, the reed-valve XR70RV which produced 148hp at 12,500rpm (with UK developed exhausts, heads & air-boxes). Dry weight was 115kg. Top speed 295kph.

PA Barber
The Heron Suzuki TSR1-0 in Barber Museum

The first bike (TSR1-0) can be seen at the Barber Museum in the US.

PA Barber
The Heron Suzuki TSR1-0 in Barber Museum

PA Barber
The Heron Suzuki TSR1-0 in Barber Museum

PA Heron Suzuki
1986 Heron Suzuki TSR08 GP Racer

PA Heron Suzuki
1986 Heron Suzuki TSR08 GP Racer

PA Heron Suzuki
1986 Heron Suzuki TSR08 GP Racer

PA Heron Suzuki
1986 Heron Suzuki TSR08 GP Racer

PA Heron Suzuki
1986 Heron Suzuki TSR08 GP Racer

PA Heron Suzuki
1986 Heron Suzuki TSR08 GP Racer

Source: MCNews.com.au

1934 BMW R7 inspired | R nineT based | From $49,500 USD

NMOTO Nostalgia Project

NMOTO Nostalgia Project BMW R Homage
NMOTO Nostalgia Project
Inspired by legendary 1934 BMW R7 prototype
NMOTO Nostalgia Project BMW R Homage
NMOTO Nostalgia Project

From $49,500 USD
47 orders already taken


NMOTO, a Florida based motorcycle manufacturing company has unveiled its Nostalgia project: a beautiful design inspired by the 1934 BMW R7.

NMOTO Nostalgia Project BMW R Homage
NMOTO Nostalgia Project

Combining vintage aesthetics with modern technology, NMOTO’s Nostalgia Project allows consumers to own a piece of history that rolls on a BMW R nineT chassis complete with up to date electronics and a current spec’ air-oil cooled 110 horsepower R nineT boxer engine. 

NMOTO Nostalgia Project BMW R Homage
NMOTO Nostalgia Project

With comfortable suspension and unique steering mechanisms encased in a canonical design inspired by the BMW R7 pre-war prototype, the Nostalgia motorcycle gives enthusiasts a slice of the past without sacrificing performance or rider experience.

NMOTO Nostalgia Project BMW R Homage
NMOTO Nostalgia Project

In just 9 months from concept and final product, the Nostalgia project’s streamlined profile mimics the dimensions of the 1934 prototype despite it’s modern R nineT base.

NMOTO Nostalgia Project BMW R Homage
NMOTO Nostalgia Project

Primarily constructed of aluminium, the final product is lighter than both stock BMW R nineT and the prototype from which it gets its design inspiration.

NMOTO Nostalgia Project BMW R Homage
NMOTO Nostalgia Project

In total, 74 custom parts were created in-house by NMOTO’s expert engineers and fabricators. This includes a new 12-litre fuel tank and custom exhaust system.

NMOTO Nostalgia Project BMW R Homage
NMOTO Nostalgia Project

NMOTO designers didn’t stop with a beautiful exterior. The entire electrical system was also re-designed to accommodate this unprecedented project. NMOTO is the first company to successfully integrate the BMW R nineT electrical system with non-standard, aftermarket control panels in the bars.

NMOTO Nostalgia Project BMW R Homage
NMOTO Nostalgia Project

The Nostalgia project imitates vintage design by reincorporating the ignition lock and speedometer into the headlamp housing, though both parts are modernized.

NMOTO Nostalgia Project BMW R Homage
NMOTO Nostalgia Project

LED indicator lights and a keyless ignition system were both worked into the redesign of the R nineT electrical system, which is mostly concealed within the framework itself.

NMOTO Nostalgia Project BMW R Homage
NMOTO Nostalgia Project

NMOTO also takes special pride in the exhaust system on the Nostalgia project, which is completely handcrafted from stainless steel.

NMOTO Nostalgia Project BMW R Homage
NMOTO Nostalgia Project

The 1937 BMW R7

The BMW R7 was one of the most innovative motorcycles of its time. It introduced the telescopic front fork, had a concealed gas tank, and also featured an 800 cc boxer M208 engine with a solid cast crankshaft. Despite this, many of the technical advancements found in the R7 weren’t seen again until 1969. Unfortunate timing and high manufacturing cost also buried the unique art deco design of the R7 for decades until it was rediscovered in 2005. Thankfully for motorcycle enthusiasts, the BMW R7’s original prototype was completely restored and  reintroduced to the world at Pebble Beach in 2012.


Jay Leno on the R7


The primary objective of the Nostalgia project was more than simply creating a scale accurate look of the R7; NMOTO aimed to adapt the design to a modern chassis, taking into account the features of the serial BMW R nineT so as not to lose any modern performance dynamic.

NMOTO Nostalgia Project BMW R Homage
NMOTO Nostalgia Project

In particular, NMOTO engineers and designers worked together to design, develop, and fabricate completely new aluminum body parts. This also required them to narrow the rear subframe to better match the original prototype’s build. By concealing all the wiring into the framework of the motorcycle, NMOTO was able to maintain the sleek and streamlined appeal of the R7.

NMOTO Nostalgia Project BMW R Homage
NMOTO Nostalgia Project

Collectors know that vintage motorcycles require constant maintenance and attention, which is why they are more often kept as collectibles than for utility. NMOTO believes that the primary pleasure in motorcycle ownership is in riding and this project is aim to marry nostalgia with modern day comfort and reliability to provide a motorcycle that can be ridden every day. 

NMOTO Nostalgia Project BMW R Homage
NMOTO Nostalgia Project

The serial BMW R nineT is modern, fast, and comfortable, with the latest generation of the legendary air-cooled Bavarian boxer engine. The 1170 cc and 110 hp engine, six speed gearbox, traction control and anti-lock braking system all help to propel the Nostalgia project into the modern motorcycle arena. 

NMOTO Nostalgia Project BMW R Homage
NMOTO Nostalgia Project

While working on the Nostalgia project, NMOTO designers paid special attention not to disturb the balanced chassis or engine of the original BMW R nineT, as it closely resembled pre-war hardtail motorcycles which lacked rear suspension. Instead, they crafted a special bracket for the original wing mounting system and added the new mufflers to enhance the vintage style.

NMOTO Nostalgia Project BMW R Homage
NMOTO Nostalgia Project

With 11 colour combinations, adjustable steering and seat trim finish, NMOTO offers customers the broadest customization options. The rear of the motorcycle can be equipped with a luggage trunk or passenger seat, or customers can opt for a manual gear shift mount on the tank in the style of pre-war motorcycles. NMOTO also plans to have its own line of accessories for the BMW R nineT.

NMOTO Nostalgia Project BMW R Homage
NMOTO Nostalgia Project

www.nmoto.com

Source: MCNews.com.au