Win a Visorcat washer/wiper for clear vision

Dirty visors are not only a nuisance but a safety risk, but the glove-mounted Visorcat washer/wiper allows you to clean your visor on the go.

Visorcat is made of rubber with a webbing strap that goes around your hand.

There is a rubber loop to go over your finger or thumb, a reservoir for the provided visor wash and two 75mm-long (3”) windscreen-wiper-style blades that sit on the back of your hand, below the knuckle.

Underneath the blades is a sponge.

You wipe right to left to remove rainwater with the double rubber wiper blades.

Visorcat helmet visor cleaner and wiper
Wipe right to left to clear your visor with the double rubber blades

If your visor is dirty and needs a wash first, you wipe left to right.

The curved edge of the wiper flap pulls back automatically to reveal the sponge underneath which is moistened by the supplied washing liquid.

Visorcat helmet visor cleaner and wiper
Wipe left to right to use the sponge

There’s a wick connecting the sponge to the reservoir to keep it moist.

Make sure the sponge is wet to start with and the reservoir is full.Visorcat helmet visor cleaner and wiper

Win a Visorcat

You can win one of these $105 Visorcats simply by subscribing to our free weekly newsletter. Click here to subscribe.

If you’re already one of our subscribers, simply tell us what you think of Visorcat by leaving a comment at the end of this article.

We’ll randomly draw the winner at midnight on Friday (22 March, 2019) and announce their name in this article and on social media on Saturday. The prize will be posted to the winner. (Competition limited to Australian postal addresses.)Visorcat helmet visor cleaner and wiper

Visorcat review

I was initially quite sceptical of this product. It looked cumbersome and, frankly, a bit ridiculous.

However, it’s easy to fit over your left glove and tighten with the strap to stay in place.

Once in place you can hardly feel it’s there and it doesn’t in any way limit your clutch hand movement.

I also thought it would be a nuisance every time I took my glove off or put it on, but it actually stays in place, so there’s no need to remove it.

If you do want to remove it, just undo the strap and it comes off in a second.

The wiper blades are great for quickly and effectively wiping rainwater off your visor.

On wide visors you may have to wipe up to three times to cover the whole field of vision, but generally one wipe will clear enough of the visor for good vision.

Yet another reason to go riding in the rain!Fogging helmet visor wet rain work visorcat

Dirty visor

A dirty visor is another matter.

I prefer to wash off grime, insects, dust, etc with water or a cleaning liquid. If you wipe it straight away, you are liable to scratch your visor.

Even if you can’t see the scratches, you may have made very small scratches which cause a blurry “starring” effect when looking into the sun or car lights at night. 

I was reticent to use the sponge washer, so I tried it first on an old helmet.

You have to make sure the sponge is well and truly moist before wiping across your visor.

I preferred to pull over and check that the sponge was wet first. I even added an extra dob of the liquid directly on to the sponge just to make sure.Visorcat helmet visor cleaner and wiper

I tried it several times on the old helmet and it worked fine without any visible or even minor scratching. That made me confident enough to try it on a brand new visor. It left no scratches.

However, I would not use it on a very dirty or dusty visor. I’d rather douse the visor with plenty of water first.

The Visorcat works just fine for light grime such as a small bug straight after you’ve hit it.

And isn’t that usually the case? You’ve just cleaned your visor, hopped on your bike and in the first kilometre you hit a bug right in the middle of your field of vision!

With the Visorcat you don’t have to stop, but can keep on riding.

Source: MotorbikeWriter.com

Leave a Reply

Your email address will not be published.