2021 Yamaha MT-09 Launch Report

2021 Yamaha MT-09 Review


Yamaha have just launched the 2021 MT range, with a road ride north of Sydney and some time on a private road to check out the new MT-09, updated MT-07, as well as the continuing MT-03 and MT-10 models.

Yamaha’s MT-09 was the big news for the 2021 MT range

2021 marks a major evolution with the third generation of the MT-09 – the line’s flagship model which started it all. When you consider where the MT-09 kicked off in 2013, it’s quite the transformation, while retaining an ultra-competitive price, all things considered.

Naturally the MT-09 was hot property thanks to receiving the greatest make-over, with both the standard model and the up-spec SP available to ride. So what’s new in 2021?

The up-spec Yamaha MT-09 SP version

It would probably be easier to just mention what hasn’t been updated, which is essentially the calipers and rotors, and when Yamaha state this is an all-new model they aren’t over-exaggerating.

As a quick recap that’s a higher capacity triple, totally revised frame including significantly altered geometry, updated suspension to match, refined ergonomics, extensive electronics package with TFT display and of course styling to more closely align with the last MT-03 update. You can find more details when we originally covered the update here – MT-09 gets major update for 2021.

Gone is the MT-10 styling, however the MT-09’s electronics have more in common with the R1 now thanks to an IMU, while the SP version offers a bump up in suspension spec’, as well as cruise control and unique aesthetics. Most of those updates carry across from the previous SP, but of course you’re now benefiting from all the standard updates to boot.

The headlight has been a matter of much debate online, with the SP seen here fitted with the smoked screen accessory

The front headlight will no doubt be a polarising point, however with the smoked accessory screen fitted to the SP, I think it works well, although I’m more inclined towards futuristic themes. It’s just a bit of a shame that screen isn’t standard fitment really.

Unless you are really attached to the older look, the new model’s ride should be more than enough to convince you to upgrade or buy one, as it’s transformational and in my mind brings the MT-09 much closer to the MT-10 in many ways. And the new higher spec’ brings it closer to competition like the Street Triple R and 890 Duke, for instance.

Jumping on the MT-09 for the first time, in some fairly wet weather up the Putty Road, the first point that struck me peeling into the first corner is that the motard feel of the old model is gone. Lowering the steering stem has totally altered the handling, while the bike itself feels much more balanced, taut and agile overall. That extends from the feedback, feel and level of input required, through to the road holding, although Bridgestone S22s in the wet are impressive.

Weather conditions were mixed but as soon as you jump on the new MT-09 you’ll notice the differences

Where the MT-09 was fairly forward biased in the past, the handling characteristic is now more neutral, which I felt really magnified the light feel of the MT-09, although that may have been a point I amplified by coming straight off an MT-10.

That means rolling into the corners at speed on the road is less aof  mental and physical effort and more of becoming one with the bike, as it tracks where you look. A bit concerned I’m already waxing lyrical about the bike? It really deserves it.

Talking about the suspension, the forks in particular have been overhauled to suit the new steering stem height and are 39 mm shorter, but retain the existing travel. Yamaha also claim the settings reduce fore-aft pitch, which is definitely true and reflected in the improved balance of the bike.

The steering stem has been lowered by 30 mm with the forks shortened to match, while the SP features gold forks with DLC coated, blacked out stanchions

Suspension is by no means basic, preload is adjustable, compression adjustment in the left and rebound in the right. The shock offers preload and rebound adjustment, and also benefits from a new linkage design.

Sure the suspension hasn’t been revolutionised, but I’d say the frame and geometry have come a way in allowing them to shine more than we’ve seen previously. My one criticism was that the rear was a little harsh at times over the poorer road surfaces, but in saying that, with the bikes being swapped around amongst the group on the launch there wasn’t time to try and fine tune within the available settings.

Combined with the updated engine which produces smooth, fast revving triple torque and you’re onto a ridiculous levels of fun, with a great level of refinement from the CP3, without losing any of the thrill. Part of that is due to an aggressive intake growl, but I’d also say there’s been a decent step forward in throttle response and the ‘flow’ of the engine.

The engine, fitted with protectors here, adds 42 cc and bumps up power and torque, offering more refinement

The engine itself gains 42 cc care of a 3 mm longer strong and is now Euro5, and while there hasn’t been an enormous increase in power – just three per cent at peak – the mid-range torque is impressive and bolstered by six percent its 7000 rpm peak. Yamaha have notably also added 15 per cent inertial mass to the crank and claim nine per cent better efficiency.

All this results in a MT-09 that is smoother, especially on a gentle throttle opening from down low, but revs hard and fast in anger, with no hesitation, resistance or reluctance. The throttle is full RbW too, but still offers a traditional and tangible feel at the throttle regardless, making the machine a little more tractable. At times the outgoing version’s throttle could be a little jerky, especially in the more aggressive riding modes.

Some bikes like to be kept in the mid-range, but with the MT-09 the full rev range offers impressive performance on tap, with the most likely limiting factor being speed limits or your willingness to break them. The slip and assist clutch also helps on closed throttle to smoothen deceleration.

A slip and assist clutch is standard fitment alongside an up and down quickshifter

The standard quick-shifter is also a welcome piece of kit, with easy upshifts and a nice little bark in all conditions. The downshift capability really came to life on the private road where being a little harder on the gas rewarded well rev-matched downshifts.

An addition for 2021 is the radial master-cylinder and I’ve got to say I really liked the overall front brake set-up, especially in the pouring rain, where a fairly gentle bite made transitioning onto and off the Yamaha stoppers very smooth.

Getting more braking power out of that front end set-up did require a little more effort at the lever – with a couple of fingers – but modulation was good. Those who love extreme levels of bite and instantaneous power might want to change pads. There was plenty of stopping power there for me, personally, but obviously it’s no Brembo M4 or Stylema setup.

A Nissin radial master-cylinder is a new addition in 2021

Peeling into sodden corners was a simple and enjoyable affair as a result, with great front end feel and huge levels of confidence, partially thanks to those S22 tyres, but also in large part due to the chassis updates, which make the latest MT-09 feel sportier and easier to ride thanks to that neutrality.

A highlight on the road was also easily being able to lock into the bike between the pegs and tank, although obviously that’s a personal note, that relies on rider proportions. Interestingly, this also coincides with the feel of sitting in the bike, rather than just on it, with a marginally taller seat height at 825 mm, not to mention wider aluminium ‘bars.

It may sound ridiculous to say about an upright nakedbike, but the MT-09 just feels like it carries more sportsbike DNA now, where previously it was a mix of the older style more staid nakedbikes with a handful of motard style handling, in the chassis at least. You could never accuse the CP3 triple-cylinder of lacking sporting prowess…

Handling is far sharper and more balanced in 2021 on the new MT-09

The electronics package is also more advanced than ever. Power Mode 4 in the wet did soften the throttle response, while cornering ABS and traction control never really came into play at my level of agression.

The possible settings themselves are fairly extensive, you’ve got four power modes controlling throttle response, traction control, the Slide Control System (SCS) and Lift Control (LIF). That can be accessed via three preset modes, one of which you can manually set to your needs, while for those who want it to be all the riders hands, the TC, SCS and LIF can be disabled.

You do need to manually disable the traction control, as you can’t preset that into even the manual mode, I think European legislation mandates this.

The TFT is only 3.5 inch, however it’s super clear and fits the theme

The TFT display is on the small side however, and I think if you’re used to a big colourful five-inch TFT, the MT-09 may disappoint a little on this score, partly because the surround is quite large. It does however do the job, with an exceptionally clear and vibrant look, glancing down to check speed was never an issue.

Likewise the switchblock are a little busy, although once you understand how they work it is fairly easy to toggle through the various settings, even on the run. I think the set-up could have been implemented a bit more simply, but there’s also a lot of options, so it’s always going to be a juggling act between access to everything and making small changes.

I’d be interested to see how my thoughts might change around this, spending more time with the bike, and making more use of the various settings available. Plus you can access the settings through the dash interface which offers a much more insightful look at what’s available, but isn’t really suitable for when you’re running through the twisties at speed.

Switchblocks on the SP are a little more busy due to the inclusion of cruise control

For the road, in those wet conditions, the take-away was that the 2021 MT-09 is a massively overhauled machine that handles in a much sharper, more effortless and nimble fashion, carrying its weight extremely well and maximising controllability without trading off the character or aggressiveness of that barking mad triple.

It has however traded off that motard-like feel… so if you were really enamoured by that, you might not love the changes. As far as I’m concerned though the MT-09 is significantly better in every way from my initial impression.

On the private road, where other vehicles and speed limits weren’t a concern the suspension was perfect on the grippy and smooth surface, and it was very evident that if you were to take this machine to a track day, it’ll be far more rewarding than the outgoing model.

A private road with flawless surface was perhaps a little more flattering to the suspension than our Australian roads

Hard acceleration still has that front end getting a little light – both in Mode 1 with TC set to 1 and Off – while pulling a wheelie will remain easy should you so desire. It’s not my forte but plenty of others made that clear. Plus as mentioned the quick-shifter was really in its element here, making it easy to wash off speed onto the slipper clutch, or with those front brakes.

I’d definitely note the MT-09 is a much easier machine to get flowing through the turns, with a quick transition through the esses and smoother overall ride as the speeds rose, where in the past more planning and effort was required, especially in the tighter stuff.

That suits me perfectly too as I tend to prefer a fairly flowing riding approach, which probably reflects me not being the fastest rider out there. That may also explain why I appreciate the gentler initial braking response too.

Forks are adjustable on both models, with the SP running higher spec KYB forks, with high and low speed compression damping

One point I did note on the MT-09, having ridden the MT-07 and MT-10 at the same location was I still found it required more effort to move around on than both these bikes, which was probably a personal proportions issue. Keeping in mind the MT-07 is far more limited when it comes to speed, while the MT-10 has incredible mechanical grip and a much more ‘on rails’ feel. However, the general riding ergonomics were spot on for me.

In comparison to the MT-10, the MT-09 feels significantly lighter, however it shares that feeling of mechanical grip now – to an extent – and where I’d have said the MT-09 was the odd one out of the range, it’s far closer to the MT-07 and MT-10 in 2021, even exceeding the MT-10 in some ways.

An Ohlins shock with external preload adjuster is also found on the SP

One thing I did notice was that I preferred the standard MT-09, over the SP, it felt a little more taut, which may have just been due to having fresher tyres at the end of the day, as an unlucky flat tyre took the standard out of action for a number hours, while the SP ran throughout. There’s a lot of little details that really stand out on the SP however, and I didn’t get the same impression on the road.

Now keeping in mind this is a first impression, with time shared between the MT-09, MT-07 and MT-10 over the two days, I’ll happily declare the new MT-09 is a massive improvement and incredible value.

The standard MT-09 is $15,249 ride-away, marking a fairly reasonable increase over the 2020 version, considering the enormous updates. I would certainly say it’s now competing against machines like the Street Triple R, or Duke 890, punching well above its price tag.

The 2021 Yamaha MT-09 comes in two variants, the standard for $15,249 ride-away, while the 2021 MT-09 SP is $17,300 ride-away

The 2021 MT-09 SP adds an Ohlins rear shock, high and low speed compression damping adjustment in the KYB fork, cruise control, SP livery including blacked out components, polished swingarm and special seat at $17,300 ride-away, but if you’re on a budget I don’t think you can go past the standard.

The chassis updates really have revolutionised the 2021 MT-09 and while I think there’s areas where people may wish for a higher spec loadout as part of the package – namely the brakes or TFT – it is really a fair request considering the price? Value is a subjective area, so you’ll have to decide on that one.

I’m definitely keen to spend some more time on the new 2021 MT-09 and MT-09 SP, hopefully in some better conditions.

2021 Yamaha MT-09

2021 Yamaha MT-09 Specifications

Source: MCNews.com.au

Just Released: USWE RAW Series Moto Packs

The new USWE RAW lineup is designed for off-road riders who are tired of their packs moving around while out on intense trails. 

Begin Press Release: 


USWE Announces New RAW™ Series Moto Packs

Moto Hydration Pack with USWE’s Award Winning NDM™ Harness Now Available in 3, 8, and 12L Sizes

uswe raw

MALMӦ, Sweden – May 20, 2021 – USWE, leader in action packs for motorsports and active outdoor, today announces the launch of its new RAW™ Series, the ultimate off-road adventure and enduro motorcycle racing packs featuring USWE’s proprietary NDM™ harness system, smart organization, and multiple size and capacity options.uswe raw

The RAW™ Series comes standard with ventilated shoulder straps that are ergonomically designed for a comfortable and smooth weight distribution as well as the 1.2 harness system with the NDM™ (No Dancing Monkey) Technology. NDM™ uses a unique elastic harness system that allows for a tight fit but gives the extra freedom to breathe and move while deflecting any possibility of your pack bouncing around regardless of the intensity of the ride or race.

uswe raw

The RAW™ 3L has a main storage compartment for hydration and a water-resistant phone pocket, with the addition of a detachable organizer for tools and essentials. The RAW™ 8L and 12L have a main storage compartment for hydration and gear with two zippered organizer pockets for tools and equipment. Two external attachment straps for your jacket or extra equipment round out the revolutionary designs of the RAW™ Series.

uswe raw

The Raw series is the pack of choice for USWE’s hard enduro athletes Billy Bolt, Manuel Lettenbichler, Cody Webb, Taylor Robert and Trystan Hart.

RAW™ Series 3L

Features:

  • Bounce free No Dancing Monkey™ 1.2 harness system with integrated elastic straps that expands along with the chest during physical exertion, allowing a constant tight and compliant.
  • Ventilated shoulder straps that are ergonomically designed for a comfortable and smooth distribution of the backpack over the shoulders.
  • Air-vented back panel with wave-profile pads for optimal comfort and airflow.
  • Main compartment for hydration and water-resistant phone pocket.
  • 2.0L/70oz Elite™ hydration bladder with a slider opening for easy cleaning/drying and to make it possible to put ice inside the bladder during hot conditions. The bladder is also equipped with a smooth Plug-n-Play tube coupling for extra secure and easy handling.
  • Detachable organizer pocket for tools, equipment and food.
  • 2x tube clips, secure attachment for the drink tube.
  • Tube port – if using the USWE helmet handsfree kit (kit not included with the pack).
  • Reflective points for night visibility.
  • MSRP: $129.95

USWE RAW 3
USWE RAW 3
USWE RAW 3
USWE RAW 3
USWE RAW 3

RAW™ Series 8L/12L

Features: 

  • Bounce free No Dancing Monkey™ 1.2 harness system with integrated elastic straps that expands along with the chest during physical exertion, allowing a constant tight and compliant.
  • Ventilated shoulder straps that are ergonomically designed for a comfortable and smooth distribution of the backpack over the shoulders.
  • Air-vented back panel with wave-profile pads for optimal comfort and airflow.
  • 3.0L/100oz Elite™ hydration bladder with a slider opening for easy cleaning/drying and to make it possible to put ice inside the bladder during hot conditions. The bladder is also equipped with a smooth Plug-n-Play tube coupling for extra secure and easy handling.
  • Big main compartment for hydration and dry gear.
  • 2x zippered organizer pockets with a large and smooth opening.
  • 2x tube clips, secure attachment for the drink tube.
  • Tube port – if using the USWE helmet handsfree kit (kit not included with the pack).
  • External gear carry attachment points.
  • Reflective points for night visibility.
  • Product Page – 8L $139.95 | 12L $149.95

RAW™ 8L

USWE RAW 8
USWE RAW 8
USWE RAW 8
USWE RAW 8
USWE RAW 8

RAW™ 12L

USWE RAW 12
USWE RAW 12
USWE RAW 12
USWE RAW 8
USWE RAW 3


USWE RAW

uswe raw


uswe raw


uswe raw




uswe raw

The post Just Released: USWE RAW Series Moto Packs appeared first on Motorcycle.com News.

Roberts and Acosta end Catalunya private test fastest

In the Moto3™ class, wonderkid Pedro Acosta (Red Bull KTM Ajo) was once again stealing headlines by taking top spot. The lightweight class World Championship leader posted a 1:48.420, three quarters of a second away from Tony Arbolino’s outright lap record. Niccolo Antonelli (Avintia Esponsorama) ended up second overall, ahead of VR46 Academy stablemate Andrea Migno (Snipers Team). Filip Salac (Snipers Team) and Dennis Foggia (Leopard Racing) took the final places in the top five.

Source: MotoGP.comRead Full Article Here

LCR Honda Castrol sign Piero Ricciuti for 2021 eSport season

LCR Honda Castrol eSports Team is pleased to announce that Piero Ricciuti will be the official rider competing in the 2021 MotoGP™ eSport Championship. Piero, or PieroRicciuti55_, who is supported by Pro2Be agency, the #1 eSports Agency in Italy, began his collaboration with the LCR team in 2020, when he was selected as reserve player.

Source: MotoGP.comRead Full Article Here

Why Quartararo’s Le Mans podium was one of his very best

There’s a reason why Quartararo claimed the final spot on the French Grand Prix podium felt like a victory. First, it came just over a week after going under the knife to rectify the arm pump problem that robbed him of victory in Jerez. Secondly, and following on from that, it proved Jerez was merely a blip, a lucky escape for his title rivals. Finally, it put to bed the theory Quartararo needed everything to align for him to be at his best. The right conditions, the right circuit, the right time of year.

Source: MotoGP.comRead Full Article Here

Honda to reproduce 150 genuine parts for RC30

Honda ‘RC30 Forever’ replacement parts scheme

After first launching to the Japanese domestic market last year the Honda ‘RC30 Forever’ replacement parts scheme expands to Europe this month, which of course means easier access for Australian consumers.

Approximately 150 genuine parts will be available for the legendary RC30, for order through the Honda dealer network

Honda started the ‘RC30 Forever’ programme after meetings with well-established RC30 owners’ clubs in Japan and Europe, during which the owners expressed their strong desire to keep these iconic bikes on the road and in the best condition by using genuine Honda spare parts.

Honda ‘RC30 Forever’ replacement parts scheme

Under the scheme, Honda produces approximately 150 genuine replacement parts for the RC30 that cover the engine, chassis, bodywork and electronics. These have been chosen based on owners’ requests and the experience of experts within Honda’s R&D and manufacturing facilities.

At the beginning of the ‘RC30 Forever’ project, an investigation through the RC30 archives undertaken in 2017 revealed that none of the original wooden models or moulds for the RC30 had been retained. It was clear that the original drawings would be needed to move the project forward. Like all motorcycles produced at the time, the manufacture of the RC30 was based on 2D hand-drawn wireframe blueprints, from which models and moulds were created. Compared with modern methods of 3D computer modelling and digital drawings, these blueprints contain far fewer specific details, which complicated the reproduction of the new parts.

New moulds created from original parts – Honda ‘RC30 Forever’ replacement parts scheme

The blueprints available were digitised, enlarged to a 1:1 scale and compared with existing parts borrowed from the remaining RC30s within the Honda family and owners’ clubs to ensure their accuracy. Despite this, there were still clear and obvious gaps in the detailed information needed to produce the quality of parts required for the scheme. To ensure the parts met these very high standards, it was vital to involve the original team members, many of whom were in their 60s, to share their knowhow, passion and experience when the project team re-created the new wooden models and moulds from scratch.

It is this combination of tangible elements like new digitised drawings and available parts, with longstanding unquantifiable factors like the experience of returning members of the Honda family, that ultimately led to the successful creation of the scheme in Japan.

The VFR750R (RC30)

Honda ‘RC30 Forever’ replacement parts scheme

The legendary RC30 was first revealed at the Tokyo Motor Show in 1987, making its way to Europe in 1988. Limited to approximately 5,000 units worldwide, it was created to comply with the homologation rules required to compete in the newly formed World Superbike Championship.

Hand-built in the Hamamatsu factory, the RC30 was powered by a liquid-cooled 748cc 90° V4 and featured cutting edge race technology of the time – an approach unheard of hitherto. Honda’s development engineers made maximum use of exotic materials like carbon fibre, Kevlar and magnesium throughout the bike. The engine featured titanium connecting rods and a slipper clutch, that worked together with the tall race machine-style gearing. Wheels and brakes featured quick release mountings and the suspension was fully adjustable front and back. The bike prominently featured an unmistakable single-sided Pro-arm swingarm designed to help with rapid rear wheel changes during races.

The legacy of the RC30 was cemented when it won the World Superbike Championship in both 1988 and 1989 with Fred Merkel. It also notched up victories in multiple national and international races, including wins on the Isle of Man in the hands of celebrated riders like Joey Dunlop, Carl Fogarty, Steve Hislop and Philip McCallen.

Honda ‘RC30 Forever’ replacement parts scheme

Source: MCNews.com.au

Repsol Honda sign 2020 MotoGP™ eSport Champion Adriaan_26

For 2021 Adriaan_26 will run in the iconic Repsol colours, previously worn by his racing hero Dani Pedrosa, as the Repsol Honda Team aims to add a virtual Championship to their 15 Riders’ World Championships. The 2021 MotoGP™ eSport Global Series will run over four rounds, the first taking place virtually on June 11 as the 11 gamers chosen by MotoGP™ teams battle it out over eight total races.

Source: MotoGP.comRead Full Article Here

‘The Living End’ lead Chris Cheney gets motorcycle licence at 46

The Living End rocking on a Royal Enfield

Co-Founder, Guitarist, Songwriter and Lead Vocalist of one of “The Living End”, Melbourne’s Chris Cheney recently took up motorcycling and gained his licence at the ripe young age of 46.

Having lived in Los Angeles for the past few years, Chris and family recently moved back to Melbourne where he just celebrated his 46th Birthday and wife Emma surprised him with a voucher to attain a Motorcycle Learner’s Permit, a long time dream of Chris’. We asked him a few questions about his motorcycle and motorcycling and here’s what he had to say:

What was your first Motorcycling experience?

As far back as I can remember I always had an awareness and love for motorcycles. When My dad was in his 20’s he raced a 500 Manx Norton and travelled around Australia as well as Europe and Spain. He had given up racing long before he had kids but remained an enthusiast. We would travel to Mt Panorama every Easter to watch the motorbike races and they were some of the best memories growing up. The smell and deafening sound of the bikes hurtling around that mountain was incredibly exciting to watch. My hero was Roger Freeth and we always stayed at the same motel he did so I remember meeting him each year and we used to give him Easter eggs.”

Why did you choose the Royal Enfield Interceptor 650?

I’ve always liked the look and sound of old motorcycles, particularly the British 50’s and 60’s style. Motorbikes that actually look and sound like motorbikes, not all plastic and polite. Once I decided to actually get a bike I test rode a couple of Enfields at Mid Life Cycles in Richmond and loved them. The interceptor and GT were right up my alley. I’m a big fan of vintage guitars and Amplifiers and the Enfields just have that same style and feel to me as an an old 1950’s Gretsch guitar. They’re beautifully made but they growl when they need to.”

The Living End rocking on a Royal Enfield

Why did you decide to get your Motorcycle licence at 46?

Better late than never! I think because my dad had raced bikes and had seen first hand the danger attached he never encouraged me! I’ve always been interested in them though but I guess I just never got around to it until now. My wife bought me the 2 day license course and gave me the hand book and was like here you go, go and tick this off the bucket list.

What are the plans for your Motorcycling future?

It’s just a hobby really. I don’t plan on doing long distance travel trips. I like the idea that there’s a whole scene and lifestyle that goes with these bikes, particularly the Royal Enfields. There’s a really great community of like minded people who enjoy the craftsmanship and aesthetics of the cafe racer style.”

What is next for Chris Cheney and The Living End?

The band is going great! We’re lucky to still be doing it and it blows me away that Scott and I started this band when we’re about 14 years old!! Despite not being able to play as much as we’d like due to restrictions etc We just started working on some new material when the pandemic hit so looking forward to getting back into that ASAP. I have a solo album that is getting geared up for release and I’ve been doing some touring with that which has been a blast.

The Living End rocking on a Royal Enfield

This strike a chord with you?
Tell us how you got into motorcycling in later life and what made you choose your first motorcycle

Source: MCNews.com.au

Updated 2022 Beta XTrainer due in Australia this August

2022 Beta XTrainer 250 & XTrainer 300


The first step in the Beta enduro range, the XTrainer, aims to be a an easy to ride and versatile machine and for model year 2022 the Italian models will feature a lower 910 mm seat height and tip the scales at just 98 kg.

2022 Beta XTrainer XT 300

The 250 and 300 cc engines are designed to offer smooth, manageable power delivery, with automatic oil injection and easy to access external power valve adjustment.

The 300 engine is completely revised, with a new larger bore cylinder, new piston and new power valve. The crankshaft is revised for the shorter piston stroke, while the cylinder head is all new to match the other updated components.

The engine control unit map is all new, ensuring smoother and more progressive throttle response and linear power delivery, tying into the aim of an easier handling and smoother overall machine.

2022 Beta XTrainer XT 300

Both the 250 and 300 models also feature a clutch with diaphragm springs for a lighter and more progression action, helping reduce rider fatigue. Engagement and disengagement has also been improved, with the clutch capable of transmitting more torque and three spring preload levels are available to further customise the setup.

A new starter motor also ensures easy starting even in the most difficult of situations where reliability is important. Electronics are also updated, making components easier to remove or replace, alongside boosted reliability.

2022 Beta XTrainer XT 300

Finally the XTrainer 250 and 300 feature new graphics and plastics to further differentiate themselves from the outgoing models.

The 2022 Beta Xtrainer 250 and XTrainer 300 are both expected from August, 2021. The Beta XT 250 will be available for $11,195 and the Beta XT 300 for $11,495. Pricing does not include pre-delivery or on-road costs. See the Beta Motor Australia website for more information.

Source: MCNews.com.au