Tag Archives: Motorcycle Culture

Motorcycle Culture Across the Western World

Motorcycles are iconic and versatile vehicles loved worldwide. However, in the Western world, they enjoy popularity mainly as vehicles for recreation rather than a means of transport, in stark contrast to the way they are often used in Asia, Latin America, and certain European countries.

In many Asian and Latin countries, a good portion of their population has incorporated motorcycles as their primary form of transportation. Of course, this is more common in big, busy cities, where these vehicles are essential to daily life. Conversely, it’s fascinating to see how motorcycle culture has expanded around the globe, with many regions in the West developing riding styles and cultures that are completely unique.

For many enthusiasts in Western countries, motorcycles are equal parts for recreation and fun. However, each country has slight differences in their taste for specific motorcycles and even in riding habits—such as lane splitting/filtering, riding on the shoulder, or using a bike to transport cargo.

Vintage Norton motorcycle photo

Via Motorcycle.com.

The Origins of the Motorcycle

The origins of the motorcycle date back to 1867 when Calixto Rada invented a steam-cylinder engine and coupled it with a modified bicycle. Then in 1876, a German engineer named Nikolaus Otto invented the first internal combustion engine, paving the way for a multitude of motorized vehicles.

Another German engineer named Daimler manufactured the first motorcycle in history in 1885. It had a wooden frame, on which was mounted a combustion engine that transferred power to the rear wheel by a belt. The motor was located vertically between the two wheels.

The saddle was so high that the driver’s feet did not touch the ground. The spokes of the wheels of the Daimler were also made of wood, and the motorcycle was balanced with two small wheels fixed on each side.

Then, in 1894, Hildebrand and Wolfmüller presented the first motorcycle manufactured in series for specific commercial purposes in Munich.

During the same era, other motorcycle manufacturers became famous, such as Matchless (1899), Norton (1898), Indian (1901), and Harley Davidson (1903).

The first bikes had no gearbox or clutch, so to start, you had to run next to the bike and then jump on top of the saddle once the engine had started. In short, you played a game of skill just to not reach more than 25 mph.

In North America, it’s practically impossible to overlook motorcycles’ impact on culture. Almost as soon as these two-wheeled vehicles arrived, they developed a deep significance in the North American psyche. The result, brewed through decades of innovation and social movements, is what we know today as motorcycle culture across the western world.

Still, nowadays, there isn’t just one type of motorcycle culture. Instead, motorcycling is an incredibly diverse activity with many aspects and interest groups that vary from region to region.

How Motorcycle Culture in North America Differs from Europe & Australia

Bikers heading to Sturgis near mount Rushmore

Via Yahoo.

North America

Some differences between the American and European motorcycle cultures, for example, are more evident in how and why people ride—and on the bikes and apparel they choose to use. This stems from the different origins of the two movements.

While motorcycles had been around in the U.S. and Canada since the late nineteenth century, motorcycling really took off after World War II. Many returning veterans had difficulty re-adjusting to civilian life after their wartime experience.

Those traumatic experiences helped them develop a high-risk tolerance and made them feel more comfortable in the company of other men in dangerous situations. So, naturally, they gravitated to riding motorcycles. Some of these early riders even formed the motorcycle clubs and gangs that still exist today. Back then, riding a motorcycle in North America was a lifestyle choice.

One of the key factors here was that riding a motorcycle was an act of nonconformity to social norms or rebellion. Instead, the riders reveled in a tough-guy image and apparent disdain for personal safety.

This continues to some extent today. Many riders in North American motorcycle culture are fans of (or at least fascinated by) Harley-Davidsons, which have become a symbol of nonconformity and rebellion for several decades and an essential piece of Americana.

And while Harley Davidson doesn’t endorse motorcycle gangs, it doesn’t do much to distance itself from the scene. The reason for this might be that more hardcore enthusiasts account for a good number of Harley sales.

Still, although the motorcycle culture in the United States is mainly associated with Harleys since they represent approximately 30% of sales by brand, they are not the only popular motorcycles in this country.

Riding a dirt bike off-road

Via Swan Insurance.

There are also many extremely popular sports bikes like the Kawasaki Ninja 400, dirt bikes like the Honda CRF450R, and even ATVs like the Yamaha Raptor 700R.

Regarding riding habits, California and Montana remain two of the only U.S. states to formally allow lane splitting or filtering. Still, researchers and motorcycle experts claim lane splitting can reduce traffic and improve roadway safety. Lane splitting is a contentious topic depending on where you are. American lane-splitting laws are very different from Canadian ones, for example.

As far as riding on the shoulder, that’s not legal in the U.S. (except in Hawaii). The shoulder may look inviting in stop-and-go rush hour traffic, but riding there is a bad idea in most of the United States.

Considering that motorcycles in the United States are more of a hobby than a means of transportation, it is not that common for them to be used to transport cargo. However, in many countries where motorcycles are a popular means of transportation, it is common to see them hauling things around. For example, in Mexico, they are the most common means of food delivery.

Motorcycles parked in European street

Via Revzilla.

Europe

As opposed to the motorcycle history in North America, the origin of European motorcycling had little to do with nonconformity or rebellion. Back then, fewer Europeans could afford automobiles in the decades after the war—and cars were less practical, since they often traveled to congested areas with narrow streets.

Since motorcyclists in Europe relied on their bikes for daily transportation, they also had to ride in all kinds of weather. So, their bikes and the apparel had to be reliable and practical rather than a statement of rebellion.

Nowadays, European motorcycles and motorcycle apparel tend to concentrate on innovative technology, performance, and especially safety rather than a retro aesthetic. You rarely see someone on a motorcycle without a helmet, other protective gear, extremely loud mufflers, or straight pipes.

European bikers are also likely to ride through rough weather conditions rather than putting up their bikes. And they’re much more likely to take safety courses and ride in a more conservative manner.

BMW F800 GS off-road

Via Dude Shopping.

In terms of popular motorcycle models in Europe, the ones that take the title of best-sellers are usually adventure motorcycles and scooters. For example, models like the BMW R 1250 GS Adventure or the Peugeot Kisbee 50 tend to be popular. Street bikes like Yamaha’s MT-09 are also best-sellers in Europe.

Unlike in the United States, motorcycling is very popular in Europe as a sport because the most important championships take place there—for example, look at the MotoGP or the FIM Superbike championships, where most of the races occur in Europe and only a few happen in other continents.

Regarding riding habits in Europe, things like lane filtering or splitting are often handled differently. Lane filtering is legal in many European countries. In some countries, motorcycle riders are expected to split lanes in city traffic and on the roads. However, lane splitting is sometimes frowned upon, especially in a few countries (like Germany). In those places, although it may still be legal to filter, there are strict rules.

In Europe, it is also more common to see motorcycles carrying cargo, particularly scooters and other small motorbikes used as workhorses—like in small shops with delivery services.

Member of Australian Christian motorcycle club

Via ABC.

Australia

Motorcycle culture is deeply rooted in Australia in terms of history, but not necessarily in terms of popularity. It shares some similar characteristics with how people in the United States tend to use these vehicles. Still, there are many differences in driving habits. Overall, motorcycles in this part of the world are relatively scarce since they are for personal and sporadic use.

A factor that can be dissuasive for Australians to use motorcycles instead of cars—compared to Europe, for instance—is that the conditions for riding a motorbike are slightly different in Australia. For example, the speed limits are lower, and the police are more aggressive. Also, there are different traffic rules.

For instance, lane filtering is legal (it wasn’t always like that), but you can only do it in low-speed traffic (like a traffic jam or at a light) and only if you’re going 20km/h (12 mph) or less. More than that, and you risk getting nabbed.

Australian motorcycle road trip, longest straight road

Via Gone Touring.

Another example of a cultural difference in using motorcycles is lane-changing etiquette. In Australia, other cars will typically slow down and let you in if you turn on your turn signal.

This cultural difference contrasts with using turn signals in the U.S., where other drivers might speed up and fill the gap instead of letting you in, making some people choose not to use turn signals or ride more aggressively to maneuver through traffic.

Some of the most popular motorcycles in Australia are dirt bikes like the Yamaha WR450F and the Kawasaki KLX110. Although you’ll see a fair amount of cruisers and touring bikes down under as well.

Vintage women motorcycle club

Via Woman Rider.

Motorcycles in the western world are very ingrained in popular culture—and the motorbike continues its evolution, whether as a hobby, a means of transportation, or even as a work tool. In some cases, like the United States, motorcycle sales have never been hotter. Recently released data shows the U.S. motorcycle industry is riding a more significant sales peak than it’s seen in 20 years.

Source: MotorbikeWriter.com

A History of Horsepower: The World’s Most Powerful Motorcycles over the Decades

The Scottish have found it hard to trump their invention of Whisky. Like Fender with their Stratocaster or Apple with their iPhone, once you change the world, it’s bloody hard to do a decent encore. Luckily for the Scotts, they had an engineer called James Watt who just may have gone one better than that sweet, sweet malt liquor—he’s the guy who coined the phrase ‘horsepower.’

Horsepower refers to the amount of work it takes to lift 550 lbs (or 250 kgs) one foot in one second, which is supposedly around what a decent late-18th Century horse can manage. Watt’s idea was a simple one: to provide some solid stats so that steam engines and horses could be fairly compared.

Little did Watt know that his unit of measurement would end up keeping motorcyclists awake at night while their mental gears turned with ideas for creating more and more of the precious stuff. Of course, whether you are looking to win the TT or go fast as hell on the salt flats, you can never have enough. So here’s a brief history of all the two-wheeled, conventionally-powered beasties that had enough horsepower to get them into the record books.

1885 Reitwagen internal combustion motorcycle on display in exhibit
Image by Wladyslaw

Half a Horse: The Early Days of Motorcycle Horsepower

After a few noteworthy steam contraptions, 1885 saw the world’s first internal combustion motorcycle, famously created by Gottlieb Daimler and Wilhelm Maybach and called the ‘Reitwagen.’ Daimler (of the famous car company) is still referred to as “the father of the motorcycle,” and rightly so.

Unsurprisingly, this unsuspended and brutally rough ride wasn’t exactly brimming with tire-burning capabilities, so you probably wouldn’t want to ride one today (even if you like to buy vintage motorcycles). In fact, it had just a meager half-a-horsey of power—but since it was the only motorcycle in the world, it was by default also the most powerful.

But fear not, because as humans are want to do, speed bugs were caught, thrills were had, and sleepless nights led to new inventions a mere decade-and-a-bit later that looked a lot more like the bikes we know today. From the beginning of the 20th Century, Royal Enfield and Triumph in the UK, and Indian and Harley-Davidson in the US saw the potential of these newfangled ‘motorized bicycles’ and ran (or should that be rode?) with the idea.

Harley-Davidson Model 1 on white background
Image via Harley-Davidson

A real piece of eye candy for those who love retro motorcycles, the most powerful of these first-generation bikes was the Harley-Davidson Model 1. With a hefty four horses, the thought of a machine that was half the size of a horse but with four times its power must have blown rider’s minds—as did the fact that they could ride the thing at 35 mph (55 kmph), a speed that only the best racehorses could better.

A handful of years later, Nottingham’s Brough Motorcycles—run by the father-and-son team of William and George—decided it was time to up the ante a little. And by a little, I mean by a whole damn lot. Taking the idea of a Saville Row handmade suit or a Purdey custom rifle, Brough started producing motorcycles using JAP engines that would give owners anywhere from 30 to 50 horsepowers (at least for those cashed-up enough to afford one).

The well-known pinnacle of these bikes was the still-stunning SS-100, which managed to break the 100 mph mark in various configurations—including a stunning ‘Alpine Grand Sport’ pre-war model that had an incredible 75 horses and a world-record speed run to pop on its mantelpiece.

The still-beautiful Brough Superior SS-100 motorcycle from 1924
Image via Classic Driver

Post-War Motorcycle Horsepower: The Power of Free Will

Of course, WWII put a stop to such speed-and-power-based frivolities, but it sure was a great testbed for internal combustion technologies. As the fog of war cleared and America opened its eyes to the prosperous 1950s, a new bike began to throw some serious shade across the world’s horsepower stage.

Powered by a kick-ass 998cc v-twin, the Vincent Black Shadow managed to propel Rollei Free to a literally-eye-watering 150 mph. Surprisingly, the bike put out a similar amount of horses to the best Brough had to offer, but adding post-war tech such as new suspension systems and the company’s superior understanding of aerodynamics gave riders like Rollei a big damn edge.

Rollie Free breaking land speed record while laying on Vincent Black Shadow in only trunks and sneakers
Image via The Vintagent

By the late ’50s, we started to see a clear fork in the road for motorcycle power figures. With setting land speed records becoming a priority for many daredevils, Bonneville saw the rise of streamlined bikes like the Triumph Gyronaut X-1 and the NSU Delphin III, on which speed was really only limited by the size of your wallet and gonads. Triumph went for a more-is-more philosophy with their Gyronaut, getting 110 horses out of two warmed-up TR6 engines.

Triumph Gyronaut X-1 motorcycle and her team at Bonneville in the 1950s
Image via Hemmings.com

Motorcycle Horsepower from 1960–1990: The Japanese Invasion

In the dying moments of the 1960s, Japan planted its first big flag in the hallowed ground of moto power and speed with its new Honda CB750. It’s sometimes called the fastest motorcycle of that decade, much to the BSA Rocket 3’s chagrin (and with only 47 horses, that must doubly hurt). Meanwhile, at Bonneville, a new Harley streamliner was going hard with a 265.492 mph run from what we can logically assume was about 130 hp.

A studio shot of the 1069 Honda CB750 motorcycle
Image via Honda

When it came to horsepower through the 80s, the big hitter was the same bike made famous by Tom Cruise in Top Gun—the dreamy Kawasaki GPZ900R. Meanwhile, in all its new-wave, plastic-y glory, the Kawasaki Ninja put out an epic 120 hp and was also known as the first production bike to break 150 mph right off the showroom floor.

Studio shot of Kawasaki GPZ900R motorcycle from the 1980s
Image via Kawasaki

The Falcon and the Go-Man: Motorcycle Horsepower Since 1990

Although things began to heat up on the road, the speed of motorcycles on salt took a little hiatus in the 80s and 90s. Of course, 1999 saw the legendary release of the Suzuki 1300cc Hayabusa. With a whopping 170 hp from a technically unimpressive yet rock-solid inline-four, this Japanese tour-de-force would remain the undisputed king of power until it was knocked off its perch by the groundbreaking 193 hp BMW S1000RR in 2014.

It’s also worth noting that, unlike the BMW, the Hayabusa was enthusiastically adopted by quarter-mile kids, thanks to its fondness for power mods. That practice continues to this day.

A rider on a Suzuki Hayabusa motorcycle speeds past the camera
Image via Cycleworld.com
A BMW S1000RR motorcycle in the pits at a racetrack at dusk
Image via BMW

In recent years, a gaggle of production bikes have entered the fray to compete for the title of most powerful. The flashiest of these contenders is probably the spaceship-like Kawasaki Ninja H2R (this time sans Tom Cruise).

With a nutso 310 bhp achieved using a supercharger and some pretty extraordinary engineering chops, the little green and black rocket can make it all the way to 400 kmph—if you have the guts to test it out, the hand muscles to hang on, and tires that can handle the incredible forces applied at those speeds.

The 310 hp Kawasaki H2R motorcycle on a white background
Image via Kawasaki

Motorcycle Horsepower in Recent Years

Think that’s it? Well, think again because the Japanese Hayabusa makes one last appearance in this list—and unfortunately, it’s a pretty damn tragic one.

Returning to the strip, a non-production, non-road-legal ’Busa with a turbo the size of a washing machine and an almost unbelievable 1000 hp broke the 500 km/h barrier in 2011. And you thought doing the ton on your liter bike was a thrill? Pffft.

Bill Warner and his 1000 hp Suzuki Hayabusa on a runway speed strip
Image via Syracuse.com

Riding that bike was an entirely fearless pilot named Bill Warner, who was attempting to break his previous record from 2013. Bill lost control at 285 mph and was seriously hurt; he sadly passed away an hour later after being rushed to the hospital. He’d no doubt be happy to hear that his record still stands to this day, and we couldn’t think of a better, more brave rider to own it. Rest in peace, Bill.

Source: MotorbikeWriter.com

Book review: The Best of Drives 1

I’ve literally been around the world with Barry Green on a mixture of two and four wheels.

Barry is the author of several motorsport books and now a travelogue of great drives and cars around the world called “The Best of Drives 1”.

It should be of interest to MotorbikeWriter readers whether you are also into cars or not as it is prefaced with Barry’s early career as an amateur motorcycle racer and peppered with references to two wheels.

And, of course, the greatest “drives” are also the greatest roads to ride.

The satin-paged 174-page book costs $55 including postage and packaging anywhere in Australia and is available online at: Barry Green — Author.

It’s an motivational read laced with inspiring images that will make you want to get behind the wheel or handlebars of your favourite steed and go exploring.

Barry has worked for many years in newspapers and motoring magazines and retired last year as the RACQ’s motoring editor on the day the lockdowns started.

After a career of driving exotic and expensive cars, Barry went straight out and bought a rare 2010 Triumph Thruxton in white with a red frame that reminded him of his old 1959 Triumph Thunderbird 650. You simply can’t get two wheels out of the blood!

Motoring editor retires to two wheels
Barry on his Thruxton

His retirement also gave him plenty of time to come riding the hills around South East Queensland with me; that is, when he was not penning this great read.

As motoring editor at The Courier-Mail for a dozen years I partnered with Barry on many local, national and overseas motoring events and launches.

I’m in awe of his driving and riding abilities and I enjoy his good humour and reminiscences of a similar “wild-child” youth.

This book now has me in awe of his poetic and descriptive writing talents that figuratively put you in the saddle as he takes you to some of the greatest roads in the world in some of the most iconic and often relevant cars such as a Mini around the streets of London, a Citroen 2CV in Provence, or Italian supercar drifting twins from Tokyo to Kyoto.

Of course, there is a big section on Australian roads including several of our local SEQ riding routes. 

Even though I know these roads like the proverbial back of my glove, it is refreshing to read Barry’s perspective. 

ROHITESH UPADHYAY breaking the record for world's longest no-hands wheelie October 2019

And I now know why he lingers a little longer on the McAfee’s Lookout bend of the Mt Glorious Road … that’s where he was married to his life-long partner.

The book starts in the 1970s when Barry was inspired by the cult film Easy Rider to become a self-confessed wild child, drag-racing a Kawasaki triple before a succession of road and dirt bikes passed through the garage of his rental where there was always a tallie in the rattly fridge to welcome his like-minded mates.

I don’t think I would be alone among MotorbikeWriter readers in relating to much of that scenario.

And like Barry, starting off on motorcycles instilled the most basic motoring skills and mechanical sympathy that breeds a talented motorist.

He finishes his book with an eclectic selection of vehicles he has driven over the years that range from a 1965 Austin-Healey 2000 Mk IIIA to a 2008 HSV Maloo R8 and on to a 2015 Ferrari F12 Berlinetta.

Thankfully he includes one of my favourite well-balanced raw Italian sports machines, the 1976 Lancia Beta Coupe. 

Hopefully my all-time fave — the Fiat 124CC — will feature in The Best of Drives 2, coming soon!

Source: MotorbikeWriter.com

Twisted Road Gives More Opportunity for Free Motorcycle Rentals: ‘One, Two, Free’

Twisted Road, a ride-sharing community responsible for thousands of motorcycle rentals all over the country has just released a new program dubbed “One, Two, Free”. The program gives those who wish to rent motorcycles even more opportunities to hit the open road by giving them free rental days in the community. 

The launch of the new program benefits those who wish to rent motorcycles and encourages them to rent for an extended time, again and again. The recurring One, Two, Free program gives the rentee the ability to one free day or to accumulate those earned days for future rentals after two rentals. 

Founder and CEO of Twisted Roads, Austin Rothbard said “We continue to find ways to make riding more affordable,” and when asked how to take advantage of the new program he said  “This program is simple. No fees, no membership, no limits, no promo codes.”

“We’ve made this as simple as we could. The free rides just appear in the rider’s accounts once the first two rides have been taken. It’s like getting a free cup of coffee after your 10th cup. Only it’s a free day of riding. And instead of buying 10 rides, you only need to ride twice.”

ADV rider crash

The company allows motorcycle owners to earn cash while renting their own bikes on the platform. Twisted Road offers extensive insurance on rentals to ensure everyone is taken care of. 

Though Twisted Road isn’t the only major player in the peer-to-peer rental industry, we’re happy more platforms like this exist to give riders a chance to get on two wheels without spending $20K on a new motorcycle. For more information on Twisted Road, head to their website

Source: MotorbikeWriter.com

Ride Prepared: The Things You Need In Your Motorcycle First Aid

Last updated:

“No matter what bike you buy, you’ll drop it at least once.” We’ve all heard the saying, and being honest (come on guys and girls!), we’ve all done it at least once. Parking lot practice, coming to a stop at a red light, getting a sudden gust of wind when you’re setting off, the bike and you have gone down at least once. Often, these drops are the source of some good-natured laughs, a little bit of embarrassment, and a lesson in humility learned.

Yet, not all drops happen at low or no speed. What happens when you come across, or witness, a drop when going 100 KPH? What if you are doing a long-distance tour and come across someone that has cut their hand trying to fix the battery lead under the hood of their car? Having first aid knowledge is definitely a plus, but having a ready-to-go first aid kit is the best kind of preparation for these scenarios.

First Aid Kit Limitations

Carrying Size

In a car, you can realistically carry a full aid kit, with everything and anything you could possibly need in an emergency or aid situation. On a motorcycle, unless you have a dedicated top box or pannier for a kit, there is a significant size limitation. Often, a motorcycle first aid kit is the kind you can fit into a pocket of your jacket, in your backpack, as a pack around your waist, or sometimes strapped down over your pillion seat.

It also means that you have to be prepared for the most common types of injuries that may require first aid. You cannot realistically carry a spinal board on a motorcycle, and while spinal concerns may be common in accidents, it’s often more important to stop bleeding and help the patient through shock setting in.

Injuries You Expect To Encounter

The most common types of injuries experienced by motorcyclists are not major traumatic injuries like broken bones and major cuts. In fact, the most common type of injury is either a burn, via sunburn, accidental contact with the exhaust pipe, et al, or an eye injury, from riding with the visor cracked open or fully open with sunglasses that are not road protection rated.

You can also expect scrapes and cuts from quite literally hitting the road, although the severity is often dictated by the road surface and the speed of travel. In the worst cases, you can expect to encounter fractures, breaks, and lacerations.

With this in mind, let us examine what really should be in your motorcycle first aid and/or trauma kit.

First Aid Kit Contents

RoadGuardians Kickstart First Aid Kit
Image courtesy of Road Guardians. The Basic Kickstart Kit, including almost all of the items listed below in a small pack you can wear around your waist

Firstly, we at MotorBike Writer must give our heartfelt thanks to Road Guardians First Aid Training For Motorcyclists for their invaluable assistance in helping build out this list. We highly recommend checking to see if a similar first aid for motorcyclists course is available in your area.

Basics

The first thing in any first aid kit, no matter the size, is at least two pairs of nitrile gloves. Protecting yourself from bloodborne diseases, as well as having a somewhat sterile field of treatment, is priority one. If you cannot safely perform first aid, it may be an extremely tough call, but you have to look after yourself first.

On the subject of sterility, having a small squeeze bottle of hand sanitizer that carries an anti-microbial rating is key. Make sure it is at least 60% alcohol, and if possible, be waterless so it cleans quickly and doesn’t stick around on the hands.

The third most vital thing in your first aid kit is a set of trauma shears. You can find these at most medical supply stores, where they may also be labeled as paramedic shears. You want ones that are at least inches long. They are designed with a flat bottom to be slipped under clothing, leathers, and the like, to cut away said clothing or leathers to allow access to potential injury and trauma.

A first aid field guide, a small first aid book, or even a cheat sheet that is laminated to protect against the weather is always helpful. In the heat of the moment, while you may be remaining calm externally, your mind might be racing, and having a quick lookup can ensure that you apply first aid correctly.

Having a syringe of sterile saline is recommended, but not fully necessary, to wash out (irrigate) any deeper cuts or surface abrasions, getting rid of the dirt, and cleaning the wound for treatment

Heavy-duty ziploc or even freezer bags are extremely useful for putting biohazardous material such as used gauze, used gloves, et al in to keep them separate from sterile areas or as part of the post-aid cleanup.

A collapsible rescue breathing mask is important in today’s world, especially with the pandemic. These masks will cover the mouth and nose, and often will have a one-way flutter valve in them to allow your breath to pass through, but not allow any return breath to prevent contamination.

Cuts & Abrasions

Since abrasions and cuts may be encountered anywhere, the first thing to really take care of is having a variety of bandages. Along with an antibiotic ointment either in a small tube or single-dose tear packs, everything from some regular bandaids, at least four butterfly bandages/steri-strips/adhesive sutures, and four large 4×4 packaged, sterile gauze pads are the priority.

It is also recommended that you carry a few folded paper towels in a ziplock bag, as these can be used to wipe away blood or other fluids to get to the site of the bleeding. Once the cut or site of bleeding is identified, then using the gauze pads to put pressure on the cut is advised.

If there is room in your kit, a tourniquet is recommended as well, one made of a strong strap with some kind of handle to turn the tourniquet tight. This is to be used for the most serious of blood injuries such as an open amputation, and it’s always better to have one and never need it, than to need it and not have it. It’s better to prevent someone bleeding out and they lose a limb than for them to die. Harsh truth, but the truth nonetheless.

Burns & Insect Bites

Believe us, you’ve never pulled over and parked by the side of the road as fast as when a wasp gets in your helmet. Even then, you’re probably going to get stung a few times, so here are some items you should carry.

Most importantly, if there is room in your kit, an EpiPen is highly recommended, and it should be changed out when it is close to expiring. Many people who have major allergies or anaphylactic reactions will have an EpiPen on their person, but if you identify such a reaction, having an easily accessible EpiPen, instead of searching that person for theirs, can quite literally mean life and death.

Due to how commonly people get a sunburn, an accidental heat burn from touching a hot part of their bike, or even an insect sting, some burn gel and/or sting relief gel in your kit is one of those things you will use more often than not. A small tip, aloe vera-based gels, or those fortified with aloe vera extract, work extremely well here.

As well, having some instant cold packs designed for first aid kits will be immensely useful. These are the little folded packages that you squeeze one side to break open a vial inside, and due to the chemical reaction taking place, it gets very cold, very quickly. One of these applied to a minor burn or major sting will bring quick relief, as well as reducing the stress the patient is experiencing.

Breaks, Fractures, and Sprains

It is human nature to extend the hands in front of us when falling or flying through the air, so that the “least important” part of us, the arms, take the brunt of an impact, protecting the head and torso, the so-called “life box.” As part of this natural instinct, arm, wrist, and hand fractures are quite common non-life-threatening injuries, as are collarbone breaks.

Twisted Road Website

In terms of first aid, having a few triangle bandages can be extremely helpful. These bandages can be used as slings, can be wadded up to be padding, can be rolled quickly to form bindings for splints, can be used to tighten gauze, can be used as tourniquets in extreme situations, and are generally just damned useful. While air splints are a bit too large to carry in a motorcycle first aid kit, if the patient’s motorcycle has suffered severe damage, a triangle bandage wadded up inside a front fairing, with two more bandages tying an arm down to that fairing means you have a makeshift split. Triangle bandages are literally the Swiss Army Knife of a first aid kit.

As breaks and fractures are the most common type of injury that can send someone into shock, having an emergency blanket or two in your kit is vital. These can be used as makeshift rain covers, are designed to reflect body heat back into a body with the shiny side, and can also be used as a treatment blanket if you need to sit someone down on the ground and prevent them losing body heat to cold or damp grass/mud/etc.

Useful Extras

It is highly recommended to carry a ziploc bag that is nicknamed “the small pharmacy.” In this bag, clearly identified, should be anti-diarrhea tablets, antihistamines, antacids, regular or extra-strength over-the-counter painkillers, and a few packs of water-soluble electrolytes you can mix in with water or take straight from the package. Not all first aid is direct and dealing with broken bones and cuts. On a long, multi-day motorcycle ride, diarrhea can dehydrate you very quickly, and having electrolytes to replace the ones lost is vital.

If you can squeeze it into your kit, having a couple of 2 inch wide rolls of gauze is another one of those “you never know” types of items. They can be used to wrap burns, hold gauze pads in place, help tie splints, and generally just be useful.

A few glowsticks are extremely useful, especially in multiple colors. These can be used for everything from emergency light to work by at night, to signaling traffic away from an accident scene. If you have multiple colors, having green, yellow, and red as those colors can help with triage, with green as OK, yellow as a concern, and red as emergency aid needed.

Especially in Australia, having a good pair or two of tweezers in your kit is important. Stings, bites, and nasty plants abound, so being able to pull plant spikes, spider mandibles, stingers, or even the odd splinter from your skin quickly is important.

Summary Checklist

Road Guardians Rebel First Aid Kit
Image provided by Road Guardians. The Rebel Kit, which has everything you could possibly need in a first aid kit that will fit in a backpack or pannier/top box on your bike

While this may sound like a hell of a lot of stuff to fit into a small bag, you will be surprised at how many items can be folded flat, naturally lay flat, or can fit around each other in such a kit. In fact, all of these items will slide into a kit small enough to be slid down the outside of a camelback, or tucked into the front pocket of an adventure riding jacket.

The Checklist:

Essentials

  • Two (2) pairs of Nitrile Gloves
  • Anti-microbial, >=60% alcohol hand sanitizer
  • Trauma shears
  • First aid guide book/field guide/cheat sheet
  • Syringe of sterile saline for irrigation (if possible)
  • Collapsible rescue breathing mask (with one way valve if available)
  • Regular bandaids
  • Four (4) butterfly bandages (can substitute adhesive sutures or steri-strips)
  • Four (4) sealed, sterile gauze pads, at least 4 inches square
  • Paper towels folded flat in a ziploc bag (for wiping/fluid cleanup)
  • Burn and/or sting relief gel (Aloe vera based or infused highly recommended)
  • Instant cold packs (we recommend at least two or more, as space allows)
  • Three (3) or more triangle bandages. The most useful multitool in your kit
  • Two (2) emergency blankets if possible, one (1) if not

Really Nice To Have

  • In-date and sealed EpiPen
  • Tourniquet with handle and strong strap (if possible)
  • Heavy-duty ziploc/freezer bags for biohazardous waste and post-aid cleanup
  • The Small Pharmacy bag
    • Antihistamines
    • Antacids
    • Anti-diarrhea tabs
    • Painkillers
    • Electrolyte powder packs
  • Two (2) two-inch wide rolls of gauze
  • Glowsticks, preferably of multiple colors
  • Good tweezers

Source: MotorbikeWriter.com

The Best Motorcycles to Come out of America

Over the years, American motorcycle manufacturers have produced some of the most exciting and iconic models in the industry. Few motorcycles have managed to capture the imaginations of riders, both beginner and experienced, than the classic American architecture of a rumbling V-twin engine, a low-slung frame, and a relaxed pair of handlebars.

Today, there may only be a handful of American manufacturers still producing internationally renowned motorcycles, but they are some of the best in the world. To celebrate these beautiful and innovative machines, we’ve put together a list of some of the best motorcycles to come out of America, with examples taken from the past, and a few from the present day too.

Buell XB12R

Buell XB12R Firebolt Side View
Photo Credit

Kicking off our list we have one of the most recognizable motorcycles from a brand that’s had its fair share of ups and downs over the years. We’re talking about Buell, of course. Back in 1983, former Harley-Davidson employee Erik Buell was a man with a vision, a vision to build performance-focused V-twin motorcycles using HD technology.

It was a dream that has spanned decades, with different shareholders, and a story that has everything from closures, rebranding, liquidation, reboots, and the full works. Buell Motorcycles, Erik Buell Racing, and now in 2021 we’re back to Buell Motorcycles with the promise of a limited run of new machines. It’s exhausting stuff, but the Buell story is anything but dull.

We’re not here to talk about the company. Or companies. We’re here to talk about the XB12R Firebolt: a sports bike of sorts that’s built using the same powertrain as the Harley Sportster. It’s classic Harley technology—a 1,203 cc V-twin engine—but in street fighter clothing. Boasting an aluminum frame, top-shelf components, and pure racing DNA, the XB12R is a true American great.

Harley-Davidson Sportster

1957 Harley-Davidson Sportster Side View
Photo Credit

There are a number of Harley-Davidson motorcycles that could go on a list about American-made two-wheelers. The company is the backbone of the American industry and arguably the most recognizable motorcycle manufacturers on the planet. Founded in 1903, Harley-Davidson is one of the oldest motorcycle brands in the world, and the oldest continuously operating American motorcycle manufacturer.

Despite the brand’s long and illustrious history, we’ve decided to select only a single model to represent the legendary Bar and Shield brand. There’s no shortage of lists on Harleys, and while HD is a steadfast pillar of the industry, there are other manufacturers to highlight too. So, without further ado: let’s talk about the Harley-Davidson Sportster.

The Sportster has been with us since 1957, and it’s not going anywhere either. It’s an American icon in its own right. Today, the Sportster is available in two engine sizes: the classic 883 cc V-twin or the newer 1,199 cc V-twin. Both deliver an instantly recognizable ride experience, accompanied by a sound that other manufacturers have tried to imitate, but never succeeded in replicating.

The Sportster is one of the best American motorcycles to come out of the 50s, one of the best to come out of the 20th century, and possibly even one of the best ever made.

Indian Chief

1935 Indian Chief Side View
Photo Credit

Today, Indian often plays second-fiddle to Harley-Davidson when we talk about big American heritage brands, but technically Indian has a longer history. Unfortunately, since the marque folded and the brand was inactive for a long time, it’s often overlooked since Harley can boast being in continuous production for its entire lifespan. Still, there was a time when Indian, and nor Harley, was the biggest American motorcycle manufacturer.

Beginning life as the Hendee Manufacturing Company in 1901, before changing its name to Indian Motorcycle in 1923. Shortly before the name change, the company pulled the covers off of a new motorcycle that would capture the attention of the American riding public: the Indian Chief. When it rolled onto the scene in 1922, this big twin, the biggest in the catalog, caused a sensation.

In its original form, the Chief drew power from a huger 1,000 cc V-twin, but over time that evolved into a 1,210 cc unit, and then on to a massive 1,300 cc engine. When Indian closed down production in 1953, the legendary Chief seemingly died with it. However, thanks to the Polaris-backed reboot of the brand, the Chief is now back with us, though with little in common with its ancestor. The modern Chief uses a 1,811 cc Thunderstroke 111 engine, but the overall spirit of the motorcycle harkens back to the glorious Indian machines of yesteryear.

Victory Octane

Victory Octane Side View
Photo Credit

The Victory Octane was without doubt one of the best power cruisers ever made. Now, the Victory nameplate may no longer be with us, but the spirit of the Octane lives on in the Indian Scout. Still, we’re awarding this space to Victory because when it came to innovation, Victory really pushed the envelope. Or rather, it pushed the envelope within the cruiser segment. There were many people who dismissed Victory as just another cruiser manufacturer, and while they did certainly make cruisers, they offered serious performance too.

The Octane was designed alongside the brand’s Pikes Peak International Hill Climb racer, the Project 156. It featured similar DNA, but rather than being channeled into a performance bike, it was injected into a new breed of cruiser. The Octane featured a powerful 1,179 cc V-twin engine that produced 88.6 hp and 66.9 lb-ft of torque, with a nimble nature and modern aesthetic. Unfortunately, we’ll never get to see how good it could’ve been, as Victory shut its doors in 2017.

Still, the technology lives on in the form of the Indian Scout. Which is still a great motorcycle. However, it would’ve been great to see what a brand with a vision like Victory’s could have done with it. Even so, it still deserves to go down in history as one of the great American motorcycles.

Arch KRGT-1

ARCH KRGT-1 Side View
Credit: Arch Motorcycles

Keanu Reeves might be Canadian, but his bike brand, Arch Motorcycle, is all-American. Founded in 2011 by actor Keanu Reeves and motorcycle designer Gard Hollinger, Arch Motorcycle produces made-to-order performance cruisers that are quite unlike anything else on the market. The brand’s flagship model, the KRGT-1 began life as a private commission, when Reeves set Hollinger the task of building him a performance cruiser with American values.

Fusing comfort and aggression together in equal measure, the KRGT-1 can be ridden furiously on the track, or for laid-back cross-country cruises. The bike is built around a burly 2,032 cc S&S T124 V-twin that produces a massive 121 lb-ft of peak torque, held in place by a lightweight tubular steel and aluminum chassis.

Naturally, it features premium parts, including Öhlins suspension, BST carbon wheels, ISR brakes, and more. But as each model is somewhat made to measure, no two KRGT-1s are the same.

The only negative part of the KRGT-1 is the price tag. With ticket prices of around $85,000 a go, they’re not cheap. But you’re not just buying a motorcycle. Instead, you’re investing in the future of the American motorcycling dream. Or an actor’s impressive vanity project. Since very few of us are ever going to own one, the price doesn’t really matter anyway.

Motus MST

Motus MST Side View
Credit: Motus Motorcycles

Gone but not forgotten: the Motus Motorcycles brand name only enjoyed a short life but it left a lasting impression. Motus was founded in around 2008 by Lee Conn and Brian Case, but it took a few years before the first prototype broke cover. It was called the MST and going against American convention, it wasn’t a cruiser with a V-twin engine. Instead, it was a sport touring motorcycle, with a V4 powerplant instead.

The brand got a bit of bad press for using pushrod engine design, considered outdated at the time and the wrong direction for a performance bike, but the MST (and its more powerful sibling, the MST-R) boasted impressive performance.

The MV4 1650 V4 engine produced an impressive 165 horses (MST) or 180 horsepower (MST-R) depending on what model you chose. Still, it wasn’t enough to make buyers look past the price tag. These things weren’t cheap, and that’s what ultimately led the brand to close its doors.

With the company shutting down in 2018, the MST and MSTR models could be considered something as a failure rather than some of the “best motorcycles to come out of America,” and that’s true to a degree. However, Conn and Case tried something wild and it kind of worked. Sales might not have gone through the roof, but the guys at Motus certainly did break the monotony of seeing another American V-twin manufacturer. They dared to be different.

Zero SR

Zero SR Side View
Credit: Zero Motorcycles

Daring to be different is the heart of Zero Motorcycles’ business model. While the American motorcycling legend might be built on top of brawny V-twin engines with massive displacements and huge power, the industry’s future looks quite different. Swapping internal combustion engines for electric motors, Zero has been leading the charge for electric motorcycles in the USA.

Founded in 2006 by former NASA engineer Neal Saiki, Zero designs and builds electric motorcycles with real-life usability and capability. The first production model was the brand’s Zero S model, but if we had to choose one that really defines the brand and the state of the electric motorcycle movement in the USA, then it would have to be the Zero SR.

Introduced in 2014, the Zero SR (Street Racing) features a futuristic powertrain with real performance. In stock form, the motor and battery can provide a usable range of up to 179 miles, and produce a top speed of 95 mph, complemented with 70 horsepower and 116 lb-ft of torque. If you’re looking for an American-made electric motorcycle with a versatile nature, the Zero SR should be the bike for you.

Curtiss Motorcycles “The One”

2021 Curtiss The One Side View
Credit: Curtiss Motorcycles

Now, if you’re interested in electric mobility but also demand exclusivity, then Curtiss Motorcycles have something for you. If you’re not familiar with Curtiss, you’ll be familiar with the brand’s former name “Confederate Motors.” Confederate built a reputation for building some of the most exotic, exclusive, and expensive motorcycles in North America, and now that they’ve changed their name and business model, they’ve added an extra “E” into the mix: electric.

The brand ditched its name and direction a few years ago, but since Curtiss rose from Confederate’s ashes, we hadn’t heard much. We knew that the brand would only build electric motorcycles in the future, and we knew that it would work in partnership with Zero. But it has only been recently that we’ve seen what the future of Curtiss will look like. This is it. This is “The One” – an electric machine with eye-watering performance and a unique aesthetic.

The One is a low-volume production bike from Curtiss that uses a fully customizable frame, CNC-machined components, a radial battery case, and a powertrain that produces 217 horsepower, 272 lb-ft of torque. And what does it cost? £115,000. But that’s a small price to pay for such a unique, innovative and outrageously American motorcycle. Maybe?

Lightning LS-218

Lightning LS-218 Side View
Photo Credit

Yes, we’ve got another electric motorcycle here. The whole electrification of motorcycles can be an opinion divider, but whether you agree with it or not, it’s happening—and America is very much at the forefront of development. In terms of performance, the USA’s Lightning Motorcycle Corp is hard to beat. Why? Because the brand’s flagship motorcycle, the LS-218, is the fastest production bike in the world, either gas or electric. And if that’s not something to celebrate, then what is?

Lightning was founded in 2006 by Richard Hatfield. Hatfield formed the company to focus on electric mobility, and after designing a number of interesting vehicles, the LS-218 was born. It’s an all-electric sports bike with a 12 kWh battery pack that can deliver an impressive range, and even more impressive performance. It has competed at Pikes Peak and numerous other competitions, but its crowning moment was setting its top speed record at the Bonneville Speedway: proving that it was capable of hitting 218 mph.

That kind of performance is pricey, but when compared to other high-end electric motorcycles, the LS-218 isn’t actually that expensive, with a price tag of $38,888 US. It’s electric, it’s fast, and it’s a titleholder—which is why it’s one of the best American motorcycles ever made.

Rokon Trail-Breaker

Rokon Trail-Breaker Side View
Credit: Rokon

Disagree all you like, but the Rokon Trail-Breaker is a true American icon. It’s a tough-talking, utilitarian machine with a pioneering spirit, with plenty of American grit and attitude. It might not be as well-known as a Harley-Davidson or as fast as the Lightning LS-218, but when the apocalypse comes, it’s the bike you want on your side.

The first Trail-Breaker prototype was built in 1958. It was an all-wheel-drive, all-terrain utility vehicle designed for conquering the great outdoors. And it delivered! So much so that the Trail-Breaker went into full production in 1960…and it’s still very much in production today. But what makes it special?

Equipped with a lightweight 7 horsepower motor, the Trail-Breaker doesn’t sound like much. However, it has AWD, it has hollow drum wheels that can float in water or store liquids, shod with huge tractor-like tires, and what’s more, it can tow up to 2,000 lbs.

It can climb rocks, cross rivers, carry huge loads, and accelerate to a modest top speed of 35 mph. It might be lacking in the performance department but it truly is a do-all workhorse that won’t let you down. Plus, you can buy a Trail-Breaker for around $7,775—which is a small price for such a versatile, and 100% American motorcycle.

Source: MotorbikeWriter.com