Tag Archives: Gear

California Heat 12V Heated Motorcycle Gear | Gear Review

California Heat heated motorcycle gear 12V

If you live in a colder climate (as I do) and are wondering (as I was), “What could a California company possibly know about heated motorcycle gear?” you should know that “California Heat” is something of a misnomer. The family-owned and operated company is based in Maryland and presumably named after how you should feel riding in sunny California.

I don’t live in California, so as I geared up for my February trip from my home at 6,000 feet in Southern Utah to Las Vegas for the AIMExpo show, I was excited to try out California Heat’s 12V Jacket Liner ($230), Pant Liners ($190), and Gauntlet Gloves ($175), all covered by a lifetime warranty. [Note: Make sure to check the info for each product to see what’s included and what you must purchase separately for operation.] 

California Heat heated motorcycle gear 12V jacket liner
California Heat heated motorcycle gear 12V Dual Dial Controller
The Dual Dial Temp Controller allows you to control two heat zones independently.

The windproof and waterproof gloves are made of nylon and leather with a tricot lining and Thinsulate insulation. They feature heating elements on both sides of the hands from the wrist to the fingertips. There is a rubber squeegee on the left thumb, and the index fingers are touchscreen compatible, but given the thickness of the fingertip, it’s a little clumsy.  

A great feature I haven’t seen on some other heated gloves is the 90-degree L-plug. California Heat could take it up a notch by adding an L-junction or plug on the cords that come out of the jacket liner as well, which would make it less cumbersome to slide the gloves over the cuffs of your riding jacket after the gloves are plugged into the liner.

California Heat heated motorcycle gear 12V gauntlet gloves

Otherwise, as to the wind-resistant, water-repellant ripstop nylon jacket liner, I have no complaints. It has zipper pockets for the wires when not in use and other regular pockets, including two outer pockets and three inner pockets (I especially appreciated the zippered one). The pant liners are the same composition as the jacket, also with zippered pockets for the wires, and speaking of zippers, the pants have zippers halfway up the sides to make boot management easier. 

California Heat heated motorcycle gear 12V jacket liner
The 12V jacket liner has zippered pockets for the wires when not in use.
California Heat heated motorcycle gear 12V pant liners

When I left my house for Las Vegas, it was in the low 40s. I was on the interstate with an 80-mph speed limit, so I had the added wind chill factor, but I also had my windshield, and it was sunny, which helped. I run a little warmer anyway and am pretty used to colder temps, so when I started, I set both the jacket and pant dials on the Dual Dial Temp Controller ($100, sold separately) just barely above “off.” The website says the controller has “20 variable stages up to 135 degrees.” There are tactile soft “clicks” on the dials, and I counted more than 30 clicks, so I just used a visual reference. I was plenty comfortable at the lowest setting, but even on the ride back when temps were in the upper 30s, I didn’t need to turn it up much past a third of the dial.

With my job, I don’t have the luxury of only riding during my area’s warmer season, and with the California Heat gear, not only is my job easier but I now look forward to extending my riding season. If they could just bring some California heat to all the snow on the roads…

For more information, visit the California Heat website.

See all of Rider’s apparel reviews here.

Source: RiderMagazine.com

New Gear: Aerostich Triple Digit Rain Glove Covers

Aerostich Triple Digit Rain Glove Covers

Wet hands can make a motorcycle ride not only uncomfortable but also dangerous. Aerostich’s Triple Digit Rain Glove Covers will keep your hands dry even in heavy rain.

Read all of Rider’s apparel reviews here.

They’re made of three layers of breathable and waterproof ripstop nylon and pack down small so you can always have them handy when needed. These gauntlets slide on over crash-protective gloves, and an elastic drawcord with a tethered cordlock keeps them in place.

The gloves also have Scotchlite reflective strips for hand signaling and a left thumb visor squeegee.

Aerostich Triple Digit Rain Glove Covers

The Aerostich Triple Digit Rain Glove Covers are available in sizes M-XL in Black or Orange for $57 at the Aerostich website.

Source: RiderMagazine.com

New Gear: Sidi ST and ST Air Motorcycle Boots

Sidi ST Air motorcycle boots

The Sidi ST and ST Air motorcycle boots are comfortable upper-level street boots that are also ready for the track.

Read all of Rider’s apparel reviews here.

The ST and ST Air feature an external ankle brace system, a nylon inner sole with a removable arch support pad, a cam-lock buckle system for easy entry and boot removal, nylon scuff pads on the toe, closable air vents, a DuPont polymer toe shift pad, and a Technomicro base material.

The ST Air includes a replaceable shin deflector plate and additional Technomicro material on the outside for maximum airflow.

Sidi ST Air motorcycle boots

All bolt-on parts are replaceable, and both boots are available for $374.99.

Source: RiderMagazine.com

New Gear: Harley-Davidson Pan America Fairing from Wunderlich

Wunderlich Harley-Davidson Pan America fairing side fairing

The best motorcycle accessories serve two or more functions at the same time, and this Harley-Davidson Pan America fairing does just that. Wunderlich’s Side Fairing for the Pan America provides a cleaner look with a more comfortable ride.

See all of Rider’s Parts & Accessories reviews here.

On the left side of the Pan America, the back of the radiator and cooling fan, as well as cables and other parts, are visible.

The Side Fairing uses existing mounting points to cover up the opening and hide cables and parts.

Wunderlich Harley-Davidson Pan America fairing side fairing
Wunderlich Harley-Davidson Pan America fairing side fairing

Additionally, the Side Fairing redirects hot air from the fan away from the rider’s legs and boots. Available for $146.95 at the Wunderlich America website

The post New Gear: Harley-Davidson Pan America Fairing from Wunderlich first appeared on Rider Magazine.
Source: RiderMagazine.com

SW-Motech Motorcycle Luggage: Street-Rack, PRO Side Carrier, SysBag WP | Gear Review

SW-Motech Motorcycle Luggage

Unlike taking a roadtrip in a car, where you can pack everything but the kitchen sink, traveling by motorcycle requires you to be more selective about what you bring. And whatever is on your “can’t leave home without it” list, you need a way to carry it on the bike. SW-Motech offers a bewildering array of motorcycle luggage in various styles and sizes, along with carriers, racks, and adapters.

These offerings allow for a customizable, modular approach to kitting out your motorcycle, all designed and manufactured with the quality and attention to detail so often attributed to German engineering. SW-Motech also makes all kinds of cool accessories for safety, protection, navigation, and power supply (beware: sitting down with your favorite refreshing beverage and perusing their website will lead to temptation).

Related: New Gear: SW-Motech’s Centerstands

Our 2022 Honda CB500X long-term test bike is an affordable, efficient, light-duty adventure bike that’s perfect for solo touring, but in stock form, it has neither luggage nor a luggage rack. We surfed over to SW-Motech’s U.S. website, entered the year, make, and model into the “My Bike” filter, and clicked the “Luggage” product category.

First, we wanted a way to carry luggage, so we ordered the Street-Rack ($252.95), a small rear rack with multiple tie-down points that’s made of black PU-coated 5mm aluminum. We only planned to use the Street-Rack as a lashing point and carrier for a tailbag, but SW-Motech also offers a rack extension, tank ring adapters for mounting a PRO tankbag, and a wide range of adapters for various styles and brands of top cases.

SW-Motech Motorcycle Luggage Street-Rack

Next, we ordered the PRO Side Carrier ($350.95), which is made of black powdercoated 2.5mm steel. Not only is the side carrier compatible with SW-Motech’s own luggage, but adapter kits are also available for use with Givi/Kappa, Hepco & Becker, Krauser, and Shad luggage.

SW-Motech Motorcycle Luggage PRO Side Carrier

For luggage, we ordered a SysBag WP M (Waterproof, Medium; $249.95) to use as a tailbag and two SysBag WP L (Large; $399.95 each) saddlebags with adapter plates that allow them to be quickly mounted to or removed from the PRO Side Carrier. The SysBag WP L has lashing straps, so if you didn’t want the quick-release adapter plate, the bag alone is $319.95. However, the straps must be threaded through slots in the carrier’s metal plates, so loaded bags would likely move around, especially during off-road riding, which may wear on the straps over time. Given the convenience and added security of the adapter plates, they’re worth the extra money.

Because I was halfway around the world testing the Royal Enfield Super Meteor 650 in India (see my Royal Enfield Super Meteor 650 First Ride review here), our esteemed former EIC and go-to mechanical guru Mark Tuttle was kind enough to tackle the installation in my absence. From his installation notes: “Overall a nice, heavy-duty system that was fairly easy to install with a minimum of fiddling. Took me about two hours, largely because each hanger on the adapter plates must be secured with four @#$%& screws and nuts, or 32 pairs total. SWM should preinstall these. IMHO installing the system is probably best left to the (at least somewhat) mechanically inclined, though the instructions are clear, and it uses high-quality hardware.”

SW-Motech Motorcycle Luggage SysBag WP Saddlebag

Installation of either the Street-Rack or the PRO Side Carrier requires removing the CB500X’s passenger grab handles, but the side carrier arms can serve as secure handholds for a passenger. Although the instructions call for drilling the rear fender to secure the rear horizontal support arm, Tuttle said it wasn’t necessary; it aligned easily enough with the license plate bracket holes.

A nifty feature of the PRO Side Carrier are Quick-Lock fasteners that allow the carrier to be removed with a quarter turn, leaving behind only minimal attachment points for a clean look. Since the fasteners are immediately behind the loop part of the carrier, securing them with a flathead screwdriver is tricky. However, SW-Motech sells a stainless steel Multitool Key Chain ($11.95) that includes not only a fastener tool for PRO and EVO side carriers but hex keys in five sizes and a bottle opener. If you’re concerned about theft, a Screw Set ($11.95) is available to replace the Quick-Lock fasteners. 

SW-Motech Motorcycle Luggage

Once the PRO Side Carrier and adapter plates are installed, it’s literally a snap to mount the two SysBag WP Ls to each side – just line up the hangers on the pins, lift the release lever, and pop them right on. The SysBag WP M was laid flat on the passenger seat and Street-Rack, and its straps were used to secure it in place as a tailbag.

The SysBags are made of TPU (thermoplastic polyurethane) with rubber-like EVA (ethylene vinyl acetate) components and thermally welded seams, and they have roll tops made of 210 Ripstop TPU to keep water and dust out. They have reinforced handles, MOLLE patches for attaching accessories, eyelets for cable locks, Velcro fasteners for bundling excess strap lengths, and removable inner pockets. An outer flap covers the roll tops and secures with quick-release buckles, and inside the flap is a zippered pocket. The M bag’s volume is expandable from 17-23 liters, and the L bag’s volume is expandable from 27-40 liters. The L bag also has inner dividers and an easily accessible exterior compartment for stashing raingear, a thermal layer, or other items.

SW-Motech Motorcycle Luggage

Overall, this is an impressive, high-quality setup that adds up to 103 liters of storage on the Honda CB500X or other motorcycle. One thing to keep in mind, however, is the added weight. The Street-Rack adds 6.2 lb; the SysBag WP L adds 6.4 lb per bag and 3.0 lb per adapter plate, for a total of 18.8 lb; and the SysBag WP M adds 4.2 lb. All in, that’s 29.2 lb before adding any gear.

The total cost of this setup is $1,677.65. Given the quality and versatility, it’s a good investment in a luggage system that will last for years. The only question is, where will you go first? A good place to start is the SW-Motech website.

See all of Rider‘s luggage reviews here.

The post SW-Motech Motorcycle Luggage: Street-Rack, PRO Side Carrier, SysBag WP | Gear Review first appeared on Rider Magazine.
Source: RiderMagazine.com

Flip Your Lid: Modular Helmet Buyers Guide

HJC i100 Modular Helmet

It’s no secret that full-face helmets provide better crash and weather protection than open-face helmets. However, it’s inconvenient to peel your helmet off every time you stop for a drink or need to talk to your riding partner. A modular helmet lets riders have the best of both worlds.

The chinbar on modular helmets provides most of the safety of a full-face helmet but also allows riders to flip up the chinbar when stopped for a quick chat or a smoke – wait, does anyone do that anymore? Modular helmets also allow for other conveniences like a drop-down sunshield and a Bluetooth communications system (usually optional).

To be sold in the U.S., helmets must meet safety standards set by the Department of Transportation. All the helmets on this list meet those requirements, indicated by the DOT sticker on the back, and some even meet the requirements of stricter ECE standards.

If you’re considering a modular helmet, this list was curated for you. Each helmet has different features, styles, prices, and weights, so we’ve boiled all of that down for a quick comparison to help you find the helmet that best suits your needs. More color options and details are available on the manufacturers’ websites, but this list should give you an idea of the options available to you. Ride safe, and ride on!

See all of Rider‘s helmet reviews here.


AGV SportModular Modular Helmet

AGV SportModular Modular Helmet
AGV SportModular Modular Helmet

The AGV SportModular combines the convenience of a flip-up helmet with the lightness and strength of a carbon-fiber shell, offering the same impact absorption as AGV’s top-of-the-line racing helmets. The interior has a multi-density EPS liner and a removable, washable, moisture-wicking, antibacterial comfort liner with a reversible crown pad (one side breathes and the other insulates). The faceshield is Pinlock-equipped, scratch resistant, and locking, and a drop-down sunshield is also included. Available in sizes XS-3XL starting at $859.95. Weight: 3.2 lb (size M).


Fly Racing Odyssey Adventure Modular Helmet

Fly Racing Odyssey Modular Helmet
Fly Racing Odyssey Modular Helmet

The Fly Racing Odyssey Adventure can be used for both ADV riding and street riding, with a flip-up chinbar and a removable peak visor. It features a polycarbonate outer shell and a dual-density EPS liner. The moisture-wicking Quick-Dry liner is removable and washable. The faceshield has a hard coating to resist scratches and a fog-resistant interior coating. A drop-down sunshield is also included. Vents in the chinbar and crown, along with an exhaust vent in the rear spoiler, provide comfortable airflow. Available in sizes XS-2XL starting at $279.95. Weight: 4.3 lb (size M).


GMAX MD-01 Modular Helmet

GMAX MD-01 Modular Helmet
GMAX MD-01 Modular Helmet

The GMAX MD-01 was made for cross-country adventures, featuring eleven vents and a CoolMax liner to keep riders comfortable even on the hottest days. The exterior is a poly alloy shell, while the SpaSoft interior works to wick moisture away. A multifunction integrated LED rear light ensures you’ll be seen by traffic. Also included are a drop-down sunshield with an anti-fog coating, a breath deflector, a chin curtain, and speaker pockets. This helmet is DOT and ECE approved. Available in sizes XS-3XL starting at $219.95. Weight: 4.1 lb (size L). 


HJC i100 Modular Helmet

HJC i100 Modular Helmet
HJC i100 Modular Helmet

HJC’s i100 is different than other modular helmets in that it features a full-rotation chinbar for both open- and full-face riding modes, and it’s P/J homologated for both. An integrated sunvisor is cable-operated from the left side of the shell, which is composed of HJC’s Advanced Polycarbonate material. The i100 is engineered with optimal balance and weight distribution for all-day riding comfort and connects with the SMART HJC Bluetooth systems (10B and 20B). Available in sizes XS-2XL starting at $319.99. Weight: 4.1 lb (size M).


HJC RPHA 91 Modular Helmet

HJC RPHA 91 Modular Helmet
HJC RPHA 91 Modular Helmet

The top-of-the-line HJC RPHA 91 features a Premium Integrated Matrix EVO shell to enhance shock resistance, a distortion-free faceshield with increased peripheral view, and a drop-down sunshield. The chinbar has a hidden closure point for smooth contact and less pressure in the cheek area, and the 3D-engineered interior reduces wind noise. The RPHA 91 is compatible with the second-gen Smart HJC Bluetooth system and other comms systems. Available in sizes XS-2XL starting at $549.99. Weight: 3.8 lb (size M).


Schuberth C5 Modular Helmet

schuberth c5 Modular Helmet
schuberth c5 Modular Helmet

Schuberth’s C5 is a clean-sheet design that’s a leap forward in comfort, fit, and function. The shell is made of DFP fiberglass reinforced with a basalt layer for strength, and the EPS liner provides improved shock absorption. It meets the latest ECE 22.06 helmet safety standard and is homologated for use in both the open and closed positions. It has a washable comfort interior, a washable chin filter, customizable internal padding, a drop-down sunshield, and pre-installed hardware for the SC2 comms system. Available in sizes XS-3XL starting at $749. Weight: 3.6 lb (size M).


Scorpion EXO-AT950 Modular Helmet

Scorpion EXO-AT950 Modular Helmet
Scorpion EXO-AT950 Modular Helmet

Functioning as both a full-face ADV helmet and a touring helmet, the Scorpion EXO-AT950 features a polycarbonate outer shell, a dual-density EPS layer, and a removable peak visor. The oversized eye port provides better peripheral and downward visibility. A drop-down sunshield is included, and the removable and washable KwikWick II liner helps keep the rider comfortable. Removing the no-fog Everclear faceshield allows goggles to be worn for off-road use. Available in sizes XS-3XL starting at $274.95. Weight: 3.9 lb (size M).


Scorpion EXO-GT930 Transformer Modular Helmet

Scorpion EXO-GT930 Modular Helmet
Scorpion EXO-GT930 Modular Helmet

The Scorpion EXO-GT930 Transformer can be used as either a modular or an open-face helmet. The chinbar and faceshield are removable, the included peak visor can be added in open-face mode, and the drop-down sunshield can be used in either mode. The shell is polycarbonate, and the multidensity EPS liner absorbs impact energy. On the inside, the KwikWick liner is removable and washable. This helmet integrates with the Exo-Com comms system and is compatible with other comms systems. Available in sizes XS-3XL starting at $249.95. Weight: 3.8 lb (size L).


Sedici Sistema II Modular Helmet

Sedici Sistema II Modular Helmet
Sedici Sistema II Modular Helmet

The Sedici Sistema II features an outer shell made of fiberglass and aramid fiber, and the dual-density EPS liner is channeled for efficient airflow. The sunshield is easily deployed with a glove-friendly slider, and it has a moisture-wicking, removable, and washable interior with antimicrobial treatment. Fit is customizable with small panels of padding at the forehead and temples. Ventilation is provided by a forehead intake vent, a chin vent, and three rear exhaust vents. Available in sizes XS-3XL starting at $259.99. Weight: 3.7 lb (size L).


SMK Gullwing Modular Helmet

SMK Gullwing Modular Helmet
SMK Gullwing Modular Helmet

SMK’s Gullwing features P/J homologation that allows it to be used in both open and closed positions. The Energy Impact Resistant Thermoplastic shell has an abrasion-resistant finish, the interior comfort liner is anti-static and moisture-wicking, fit is intermediate oval, and there are crown, chin, and rear vents. The faceshield is double-glass, extra-wide, and ready for the included Pinlock 70 anti-fog lens. It also features a retractable sunshield, wind stops, a breath deflector, and a quick-release strap. Available in sizes S-4XL starting at $155.99. Weight: 3.8 lb (size L).

The post Flip Your Lid: Modular Helmet Buyers Guide first appeared on Rider Magazine.
Source: RiderMagazine.com

New Gear: PowerDeck Motorcycle Loading System from Aumsville

PowerDeck AmeriDeck motorcycle loading system

Capable of hauling motorcycles, ATVs, snowmobiles, and other vehicles, the PowerDeck motorcycle loading system from Aumsville Equipment Sales pairs with the AmeriDeck lift system to lift machines from the ground to the bed of a truck with the push of a button.

See all of Rider‘s Parts & Accessories Reviews here.

The PowerDeck comes in two versions: long bed (96 inches long) or short bed (78 inches long).

When in the pickup, the deck sits just above the pickup wheel wells, keeping the center of gravity low and providing storage under the deck.

PowerDeck AmeriDeck motorcycle loading system

The PowerDeck can also be used for material transport and other types of hauling. It features 2,500 lb of loading and dump capacity, a 45-degree rear approach angle, up to a 55-degree dump angle, easy-access tie-down points, and structural steel construction. The AmeriDeck and PowerDeck systems fit a wide variety of trucks.

PowerDeck AmeriDeck motorcycle loading system

Visit the Aumsville Equipment Sales website for a quote. 

The post New Gear: PowerDeck Motorcycle Loading System from Aumsville first appeared on Rider Magazine.
Source: RiderMagazine.com

New Gear: Customized Enduro Motorcycle Bags from Wolfman Threadworks

Wolfman Threadworks Luggage Motorcycle Bags

When quality meets passion, you get a work of art, and now you can get that work of art with customized enduro motorcycle bags from Wolfman Threadworks.

See all of Rider‘s Luggage Reviews here.

Wolfman Threadworks is a one-man operation run by Eric Hougen, a master pattern maker and sewing machine operator, as well as the designer and owner of Wolfman Luggage.

Eric designs and builds enduro motorcycle bags that come either in a variety of color combinations or can be personalized to the buyer. Each bag is made to order and will be cosmetically unique.

Wolfman Threadworks Luggage Motorcycle Bags
Wolfman Threadworks Luggage Motorcycle Bags

Those looking to personalize their ride can order the E-Duffle Bag ($164.99), the multisport waist Greg Bag ($199.99), the E-Tank Bag ($224.99), the DayTripper Saddlebag ($349.99), or the E-12 Saddlebag ($374.99).

Wolfman Threadworks Luggage Motorcycle Bags
Wolfman Threadworks Luggage Motorcycle Bags

For more details on the bags, visit the Wolfman Threadworks website.

The post New Gear: Customized Enduro Motorcycle Bags from Wolfman Threadworks first appeared on Rider Magazine.
Source: RiderMagazine.com

Rubber Side Down by Ron Davis | Book Review

Rubber Side Down Ron Davis

Ron Davis, an associate editor at BMW Owners News, has published his second book, Rubber Side Down: The Improbable Inclination to Travel on Two Wheels. Like his first volume, Shiny Side Up, it is a compilation of published columns, essays, and musings on life behind a handlebar.

Rubber Side Down delivers 44 chapters on motorcycle rides and the necessary things that are required for a long and satisfying motorcycling life. For example:

  • How do you find a girlfriend that actually wants to ride on the pillion seat?
  • Where do you find a motel that caters to just motorcycle customers? (Look for one near La Crosse, Wisconsin.)
  • What can you do about hazards such as a livestock truck ahead of you that suddenly splashes out a large steaming pile in your lane?
  • What is the best, swerving out of your lane or standing on the brakes when a kayak comes off the roof of a car and sails into traffic?
  • Is camping in parks with a motorcycle and a pup tent a good idea. Ron explains all the ups and downs and has decided roughing it is only for younger riders.

I was rolling along from chapter to chapter and enjoying everything and then I reached chapter 22, “Tip-Toeing Off the Resevation,” which begins with: Warning: The following column focuses on a motorcycle that is not a BMW. Yes, I know, HERESY!

I almost fell out of my chair. I lived in the Eau Claire area of Wisconsin for several years and I crossed Ron’s path many times. I often asked him if he’d like to try one of my bikes to get a taste of other brands other than BMWs.

“Try my Indian FTR,” I’d say. Or, “How about the Royal Enfield – it has about the same amount of power as a BMW at one third the price.”

“No, No! I am a shameless Disciple of BMW!”

“What about that Triumph 900 in the back of the garage? Just as old school as a BMW, twin cylinders, air cooled, and 50-year-old styling.”

“Well, maybe sometime, but not today.”

And here I am picking myself up off the floor after seeing the photo of Ron and his 2014 Honda NC700X at the beginning in chapter 22, his hand covering the Honda logo and his face in “hand caught in the cookie jar” grimace!

After my heart rhythm settled back down, I continued on until I reached chapter 30, “Glenn Stasky, Innovation Man.” Chapters from 30-34 contain profiles of several BMW riders and photos of their Germanic steeds. I turned back to the inside cover flap to see if the book can be sold only to BMW owners at BMW outlets. It doesn’t appear that is the case.

As I worked my way toward the end of the book, I came at last to chapter 39, “Exploring The Twisted Road.” Finally, we must be getting to the hundreds of twisting miles near Eau Claire and La Crosse. Other chapters have given us looks at fishing in the Eau Claire River and how to deliver pizzas in Eau Claire, so this must be the chapter on the incredible riding scene in northwest Wisconsin. The chapter turned out to be a plug for Twisted Road, a motorcycle rental service Ron used when vacationing in New Mexico.

Why a hot bed for motorcycling such as Eau Claire was completely ignored in the book is very strange. Ron, you may not have participated, but the oldest motorcycle charity ride in the U.S. is in Eau Claire’s backyard. Indian Motorcycle sponsors the Flood Run that follows the Mississippi River Road and even raffles off a new Scout each year. As far as I know, BMWs and even Hondas are allowed to participate. This event from what I have seen would have provided fodder for a fat chapter in the book.

Rubber Side Down: The Improbable Inclination to Travel on Two Wheels is an enjoyable read, regardless of the brand(s) of motorcycle you prefer, but BMW acolytes will find it particularly appealing. Published by Road Dog Publications, the book is 252 pages and retails for $19.99 on Amazon.

ABOUT RON DAVIS

Ron Davis caught the motorcycle bug at age fifteen. Forty years and about 20 bikes later, he has remained an enthusiast, especially for bikes carrying the BMW roundel. Over that period, he’s also squeezed in a full-time career teaching high school and university classes in writing, photography, and publishing while also working as a social media writer for the tourism industry in Northwest Ontario and as an associate editor and columnist for BMW Owners News. More often tongue-in-cheek commentary than a technical or travel focus, his writing has been featured by BMW Motorcycle Magazine, On The Level, Backroads Motorcycle Tour Magazine, Volume One, Our Wisconsin, and the National Writing Project, and his essays (some about riding) can be heard regularly on Wisconsin Public Radio’s “Wisconsin Life.”

The post Rubber Side Down by Ron Davis | Book Review first appeared on Rider Magazine.
Source: RiderMagazine.com

New Gear: Anthony’s Leatherworks Motorcycle Leather Restoration Products, Services

Anthony's Leatherworks Motorcycle Leather Restoration

Leather motorcycle apparel offers the ultimate protection. Anthony’s Leatherworks, based in Corona Del Mar, California, provides high-quality motorcycle leather restoration and repair services and products for suits, jackets, pants, and boots.

See all of Rider‘s Parts & Accessories reviews here.

With over 60 years of experience, Anthony’s Leatherworks focuses on making leather gear look sharp and perform at its best. The restoration and repair services offered include full reconditioning, dyeing, minor and major repair jobs, accessory replacement, alterations, section replacement, crash damage repair, and custom laser leather engraving and cutting. Anthony’s Leatherworks also offers a line of products for leather restoration, crash damage repair, and alterations and modifications.

For more information, visit the Anthony’s Leatherworks website.

The post New Gear: Anthony’s Leatherworks Motorcycle Leather Restoration Products, Services first appeared on Rider Magazine.
Source: RiderMagazine.com