Tag Archives: Benelli 900 Sei

Benelli 750 & 900 Sei six-cylinder | With Phil Aynsley

The first six-cylinder production motorcycle!

With Phil Aynsley

Argentine car designer and entrepreneur Alejandro de Tomaso bought both Benelli and Moto Guzzi in 1971-72 and immediately looked to introduce new models to refresh their ranges.

Benelli Sei PA BenelliSei
The Benelli 750 Sei six-cylinder

The quickest way to do this, as far as Benelli was concerned, was to fairly blatantly copy the Honda CB500 four – but in the form of a 750cc six!

Benelli Sei PA BenelliSei
The 750 Sei was based on Honda’s 500/4

In fact it was the first six cylinder motorcycle to enter production – Honda’s CBX not appearing until 1978. It was first shown in late 1972 but didn’t begin to roll off the line until 1974.

Benelli Sei PA BenelliSei

Benelli Sei PA BenelliSei

The Sei (Six) motor was almost identical to the CB500 with the exception of the two additional cylinders, the placement of the alternator and starter motor behind the cylinders, the airflow gaps between the cylinders and the use of only three carburettors (which kept the width down and left more room for the rider’s knees). The bike’s styling was by Ghia.

Benelli Sei PA BenelliSei
The 750 Sei added two extra cylinders onto the Honda CB500/4 design

Benelli Sei PA BenelliSei

Production was split into two series, Series 1 from 1974 to 1976, and Series 2 from 1976 until production finished in 1978. The Series 2 bikes rectified the earlier problems with manufacturing tolerances for the gearbox and crankshaft. In addition they used Moto Guzzi derived front forks and came in four additional colours to the Series 1’s red, silver and green options.

Benelli Sei PA BenelliSei
Power output was 67hp

Benelli Sei PA BenelliSei

The 750 Sei had an output of 76hp at 9000rpm, weighed in at 228kg and had a top speed of 202km/h, while only around 3,200 were produced. The bike I photographed is a Series 1.

Benelli Sei PA BenelliSei
This machine is a Series 1

Benelli Sei PA BenelliSei

In 1978 the 900 Sei was introduced, replacing the 750. The motor was bored and stroked to 906cc and the alternator was repositioned to the left side of the crankshaft, all of which resulted in the motor being 50mm wider than the 750’s.

Benelli Sei PA BenelliSei
Benelli’s 900 Sei

A duplex chain was used for the final drive and a disc replaced the rear drum brake. A six-into-two Silentium exhaust system replaced the 750’s six-into-six system.

Benelli Sei PA BenelliSei
Benelli 900 Sei

Benelli Sei PA BenelliSei
The Benelli 900 Sei lacked the six-into-six exhaust

Fewer than 1900 were manufactured prior to production ceasing in 1989, across four series. The bike seen here is a Mk4, the only version to feature the black painted motor and black chrome exhaust system. Earlier versions had round headlights, both with and without fairings. This bike is in original condition apart from the bars and grips.

Benelli Sei PA BenelliSei
This 900 Sei is a Mk 4

Power was 80hp at 8400rpm, with a wet weight of 254kg and top speed of 193km/h – slower than the 750’s 202km/h top speed.

Benelli Sei PA BenelliSei
Benelli 900 Sei Mk4

Benelli Sei PA BenelliSei
Benelli 900 Sei Mk4

Benelli Sei PA BenelliSei
Benelli 900 Sei Mk4

Benelli Sei PA BenelliSei
Benelli 900 Sei Mk4

Benelli Sei PA BenelliSei
Benelli 900 Sei Mk4

Benelli Sei PA BenelliSei
Benelli 900 Sei Mk4

Source: MCNews.com.au